Change Security Level by the program.

Hello folks.
I'm trying on Lookout 6.0.2 to return to the lowest security level 30 minutes later after someone entered a high level security login. I do not want that operators have access inside the computer if the supervisor or the technical person in charge forgot to logoff and went home.
I have tried several ways, but it seems to me that I must prepare Lookout for this, or as of a setting has to be changed/set somewhere to allow this.
Any ideas?
Season greetings.
Rodolfo Lopez

Anyone can suggest any tips to check the issue out?

Similar Messages

Changing Security level through the MC

Is there a way to turn the security level to off through the MC. I believe if you are an admin this should be an option.

Hi Bruce,
You can do this with a set rule and a triggering event from the MC.
I don't think there is a way to set the security level like there is to reset it from the MC.
Tom

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT201363 I want to change security question but the problem is i don't know the rescue email what can i do ?

I want to change security question but the problem is i don't know the rescue email what can i do ?
Please answer me quickly

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Severa years ago I purchased online Adobe Creative Suite, I recently had to change computers, and lost the program, when i attempted to restore from a cd i received a notice that my serial number was incorrect??? I paid a lot of money for this program I w

severa years ago I purchased online Adobe Creative Suite, I recently had to change computers, and lost the program, when i attempted to restore from a cd i received a notice that my serial number was incorrect??? I paid a lot of money for this program I want this corrected.@

Hi gutturnio,
Kindly provide the below mentioned details in a "Private Message" so that we can assist you appropriately.
Product your are trying to install:
OS version:
Order #:
Serial #:
Email Id on which you have registered the serial number:
There could also be an issue with the compatibility of the software and operating system you are using.
Kindly check system requirements:
CS 6: System requirements | Adobe Creative Suite 6
System requirements | Photoshop
Meanwhile, try:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
Thanks,
Atul Saini

SS2 - Problems Changing to this using the Program ...

Just an annoying little bug, if I change to this channel (42) using the Program button on the remote it quite often greets me with the "Insert Viewing Card" message. However if I key the channel directly using the numbers it works OK every time - anyone else come across this?
Solved!
Go to Solution.

May be this: http://bt.custhelp.com/app/answers/detail/a_id/14255/session/L3NpZC9XQUR0bWk3aw==/c/348

Changing Computer, what with the programs that I rent?

I am renting for one year, Creative Cloud Student and Teacher Edition. But in a week I have a new computer, I mac.
My question is, how do I get the program that I rent on this Computer?
On the other one, I don't need it anymore, because he is already dammaged.
Thank You,
Katleen Claes
Bart Van Zundert

Moving this discussion to the Creative Cloud Download & Install forum.

Changing the security level of the Blackberry localy

Hi,
I have bought a used Blackberry Pearl 8100 and cant install any third party software. When I try to install Missing Sync for Blackberry it tells my the Internet security guidline does not allow to download third party software. How can I change that?
Regards
Solved!
Go to Solution.

Look at Options > Security > General Settings. At the bottom of that screen, is there any IT Policy named there?
If so: See the RIM Knowledge Base article here for information on how to remove an IT Policy. See the Method Three in the link:
KB14202 How to remove an IT policy from a BlackBerry smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What does setting the internet zone security level to high actually do?

I was asked to set the Internet zone security level to high via a GPO, this has been done for a test group of users. The setting has been confirmed, but as far as I can see it has not actually done anything.
Can anyone tell me what changes I should see to the behavior and/or access of websites now the security level is set to high?

Hi,
Setting the internet zone security level to high might prevent harmful content with maximum safeguards and less secure features are disabled.
When you visit some sites with script pop up, the script will be disabled if you set the security level to the high level. For more information about
the internet zone security level, please refer to this:
http://blogs.technet.com/b/steriley/archive/2008/09/16/internet-explorer-security-levels-compared.aspx
Regards.

Help with asp ... security levels

I made a change to the security level for the end user. i add
a security feature by adding 12345 to their security level.
<%@LANGUAGE="VBSCRIPT"%>
<%Option Explicit%>
<%
'check to see if the page is submitted
Dim validLogin
Dim strErrorMessage
Dim intLevel
Dim sLevel
If (Request.Form("uname")<>"") Then
'user has submitted the form
'get the entered values and hit the database
Dim strUserName
Dim strPassword
'going to use an implicit connection, no connection object
needed
Dim objRS
strUserName = UCase(Request.Form("uname"))
strPassword = UCase(Request.Form("pwd"))
response.write("strUserName")
'prepare the RS
Set objRS = Server.CreateObject("ADODB.Recordset")
'set the sql statement
objRS.Source = "SELECT * FROM tblEmployee WHERE
strEmpUserName = '" & strUserName & "' AND strEmpPassword =
'" & strPassword & "'"
' heres the implicit connection
objRS.ActiveConnection =
"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\Inetpub\db\IMPCustomers.mdb"
objRS.CursorType = 0
objRS.CursorLocation = 3
objRS.Open
'check for EOF
If(objRS.EOF) Then
'no records matched, invalid login
Response.Redirect("invalidLogin.asp")
'strErrorMessage = "Invalid Login. Try Again."
validLogin = false
Else
'added intLevel to add more security on 3/29/07
intLevel = Cint(objRS("intEmpSecurityLevel"))
intLevel = intLevel + 12345
sLevel = intLevel
'valid login, set session variables
Session("username") = UCase(strUserName)
Session("userpass") = UCase(strPassword)
Session("sLevel") = sLevel
'Session("sLevel") = objRS("intEmpSecurityLevel") - changed
to add more security on 3/29/07
Session("fn") = objRS("strEmpFN")
'release the RS
Set objRS.ActiveConnection = Nothing
Set objRS = nothing
'redirect off this page
Response.Redirect("custSearch.asp")
End If
End If
%>
I'm now having trouble removing the 12345 from their security
level in the custSearch.asp.
<%@LANGUAGE="VBSCRIPT"%>
<%Option Explicit%>
<%
Dim strUserName
Dim strPassword
Dim intSLevel
Dim isum
Dim intS
Dim intNewSLevel
Dim sLevel
Dim strFN
Dim strErrorMessage
Dim strError
'get pass parameters
strUserName = Session("username")
strPassword = Session("userpass")
intSLevel = Session("sLevel")
'add on 3/29/07 for security
'get the security level
isum = sLevel
'take isum which contains sLevel and subtract 12345 from it
isum = isum - 12345
'now intS equals security level in the db
intS = isum
'put into a session
Session("intS") = intS
strFN = Session("fn")
strErrorMessage = ("strError")
'If strErrorMessage = "" Then
'strError = "There is no customer with that last name."
'End If
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<title>Employee Intranet - Customer Database, Search
for a particular customer.</title>
<meta http-equiv="content-type" content="text/html;
charset=utf-8" />
<link rel="stylesheet" type="text/css"
href="../css/pop_style.css" />
<link rel="stylesheet" type="text/css"
href="../css/forms.css" />
<style type="text/css">
/* HMTL selectors start here */
h2 {
margin-bottom:15px;
p {
margin-bottom:20px;
hr {
border:thin;
border-color:#CCCCCC;
border-style:dotted;
width:100%;
text-align:center;
table {
width:300;
align:center;
cellpadding:2px;
cellspacing:2px;
margin-left:30%;
td {
font-size:14px;
font-style:normal;
font-weight:normal;
border:0;
padding:0;
/* HMTL selectors start here */
/* ID selectors start */
#mainText {
height:400px;
font-family:Arial, Helvetica, sans-serif;
font-size:14px;
text-align:left;
margin-left:1%;
margin-right:1%;
padding: 10px 5px;
word-spacing:1px;
letter-spacing:1px;
/* id ends here */
</style>
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body>

<script language="javascript" type="text/javascript"
src="../js/pop_core.js"></script>
<script language="javascript" type="text/javascript"
src="../js/pop_data.js"></script>

<div id="border">

<div id="secNavBar"><a
href="../index.htm">Home</a> | <a
href="../htm/quality.htm">Quality</a>
| <a href="../htm/contactUs.htm">Contact
Us</a> | <a
href="../htm/siteMap.htm"> Site
Map</a></div>

<div id="logo">
<img src="../art/NewLogo.jpg" alt="Logo of IMPulse NC,
INC." usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="5,3,280,74"
href="../index.htm" alt="Return to home page" />
</map>
</div>

<div id="priNav">
<a id="home" name="home"
style="visibility:hidden;">Home</a>

</div>

<div id="mainText">
<h2>Customer Database </h2>
<p
style="font-size:14px;font-style:normal;font-weight:normal;">Welcome
<%=strFN%></p>
<p
style="font-size:14px;font-style:normal;font-weight:normal;">Please
search for a customer by using the fields below. You can use one
field or multiple fields for your search.</p>

<div id="signIn">
<div id="CSearch">
<table>
<form action="results.asp" method="post" name="search"
id="search">
<tr>
<td width="98" height="29">Last Name:</td>
<td width="150" tabindex="1"><input type="text"
name="clname" size="25" maxlength="25" /></td>
</tr>
<tr>
<td height="30">First Name:</td>
<td tabindex="2"><input type="text" size="25"
maxlength="25" name="cfname" /></td>
</tr>
<tr>
<td height="30">Company:</td>
<td tabindex="3"><input type="text" size="25"
maxlength="25" name="ccomp" /></td>
</tr>
<tr>
<td height="48" colspan="2" tabindex="4">
<input type="submit" name="login" value="Submit" />
<input type="reset" name="Reset" value="Reset" />
<a href="logOut.asp">
<input type="button" name="logOut" value="Log Out" />
</a> </td>
</tr>
</form>
</table>

</div>
<blockquote> </blockquote>

</div>

</div>
<div id="btm_Bar">
100 IMPulse Way • Mount Olive, North Carolina 28365
• Main (919) 658-2200 • Fax (919) 658-2268<br />
©2006 IMPulse NC, Inc. All Rights Reserved. </div>
</div>
<script language="javascript" type="text/javascript"
src="../js/pop_events.js"></script>

<script language="javascript" type="text/javascript">
document.search.clname.focus();
</script>

<%
Response.Write(Session("username")) & "<br />"
Response.Write(Session("userpass")) & "<br />"
Response.Write(Session("sLevel")) & "<br />"
Response.Write(Session("intS")) & "<br />"
%>
</body>
</html>
What am I doing wrong?

"pqer" <[email protected]> wrote in message
news:eugsik$kt5$[email protected]..
> What am I doing wrong?
1. You're allowing unfiltered user input into your SQL query.
I could do
some horrible damage to your system.
2. You have SELECT * in your query.
3. You're doing something that doesn't make any sense. Why
add a constant
to the security level just to subtract it again when you
actually want to
use it? You're just making more work for yourself. There is
no benefit
there.

HT3728 changing security settings time capsule

How do I change security setting on my Time Capsule WiFi?

Changing security settings on the Time Capsule Wi-Fi will lower the level of security.
If this is what you want to do...and assuming that your Mac is running Lion, Mountain Lion or Mavericks.....
Open Macintosh HD > Applications > Utilities > AirPort Utillity
Click on the Time Capsule icon, then click Edit in the small window
Click the Wireless tab at the top of the window
Wireless Security settings can be adjusted here
Click Update to save any changes

How to know the program type?

Hi,
I want to know what type of execution method a certain concurrent program has, ( e.g if it is SQL*PLUS, REPORT, SPAWN, PL/SQL etc)
I run the following sql at apps/apps
1* select distinct execution_method_code from fnd_concurrent_programs
SQL> /
E
R
H
P
I
K
Q
M
A
J
X
B
S
L
E
Where do I get the corresponding meaning of this code please.
How do I query at the form level all the PROGRAM name with execution type SQL*PLUS?
Thanks a lot

Hi,
Where do I get the corresponding meaning of this code please.Try the queries in the following links:
PSP PL/SQL API for Customizations Tracking
http://dbaanswers.blogspot.com/2007/11/psp-plsql-api-for-customizations.html
Query 9: SQL to view all types of request Application wise
http://knoworacle.wordpress.com/2009/01/12/oracle-application-top-useful-sql-queries/
Display Module Wise Reports
http://oracle-applications-rama.blogspot.com/2007/05/display-module-wise-reports.html
Or, refer to eTRM and see if it is documented there.
eTRM
http://etrm.oracle.com
How do I query at the form level all the PROGRAM name with execution type SQL*PLUS?From System Administrator responsibility, navigate to Concurrent > Program > Executable, Press F11, select "SQL*Plus", Ctrl + F11
Regards,
Hussein

Use of Security Level on ASA with ACLs

Hi,
On my configuration, I'm using extended on the inbound of my 3 interfaces (inside,dmz,outside). I was wondering if there I should remove the security levels or if they are of any use since I have ACL in place already.

Hi,
After you have attached an ACL inbound to an interface it controls the traffic for networks behind that interface. So security-levels dont have a major role anymore.
Though you should consider that there are still situations where the "security-level" might come into the picture.
If you have identical "security-level" interfaces and you want to allow traffic between them then ACLs wont be enough but you also need to use the "same-security-traffic permit " format command to allow the traffic.
Atleast in software 8.2 there is still some limitations regarding NAT depending on the "security-level" of the source and destination of the interface. I think for example you need to do Dynamic NAT/PAT between interfaces you cant do this from lower to higher direction.
Best bet is to refer to your current software level Cisco documents. Both the Command Reference and Configuration Guide PDFs found online provide good information on these commands
Please rate if the information was helpfull and/or ask more questions if needed
- Jouni

Security Level on Navigation (6.0 sp9)

I use a custom iview launch from the UWL. The custom iview comes up based off of the navigation from the default uwl screen. I am trying to code the cancel action of the custom iview.
I put a link on the page that has a reference back to the pcd location of the default page.
The portal is now complaining with the following error:
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default).
I tried to overide this by setting the security level in the portalapp.xml file to low_security.
    <component name="ApproveReject">
      <component-config>
        <property name="ClassName" value="ApproveReject"/>
        <property name="ComponentType" value="jspnative"/>
        <property name="JSP" value="pagelet/ApproveRejectJSP.jsp"/>
        <property name="SafetyLevel" value="low_safety"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
htmlb link code:
          <hbj:link
                   id="backLink"
                   text="Main Menu"
                   target="_self"
                   tooltip="Click to return to Main Menu"
                 reference="pcd!3aportal_content!/portal_content/com.nexeninc.NEXEN/fld_tots/com.sap.netweaver.bc.uwl.uwl_page">
          </hbj:link>

i had applied the patch from note 796540. however, it dint seem to help (

Two different security levels on one router?

I'm trying to connect my DS to my wireless network (on the older flying saucer style base station) and I know it only works with WEP security. I do not want to lower my security level for the main network, but is there a way to create a visible secondary network with a lower secutiry level for such devices?

Oops... I actually meant to say: is it possible to do this on one router?

Change Security Level by the program.

Similar Messages

Maybe you are looking for