Change shits of employee on Adhoc basis

Hi,
In OTL we define shits, work plan, rotation plan and then assign that plan to employee.
Till yet, to me it seems like it isnt (or I dont know how). because if i need to change an assigned shift in a plan then i need to
disturb/or create new work plan and rotation plan then assign to employee and definitely if that plan is assigned to more than one
assignment, which usually does than the plan will be disturbed for all assignments holding that plan.
My requirement is If i need to change the shift of an employee(s) or assign new shift due to any reason on adhoc basis with out
changing the rotation plan and work plan. Is it possible? if Yes the how.
Regards
Majid

Let me put an example to elaborate my question
In one department many employee are working. Those employees are definitely belongs to one Rotation plan. Now the manager of those employee likes to change the
shifts as per his requirement or on an employee request or a manager allows 2 shifts for a particular employee on the same day and he likes to do it from his desk top
using application, even though the shifts, work plan, rotation plan are already in place. The shift he want to change is not attached to WP or RP. In OTL the OTL
application developer responsibility is usually not given to managers. it is usually available to HR people or system admin.
Now in that case how a manager of particular department changes shift of his employee on adhoc basis.
Regards
Majid

Similar Messages

  • Changing of Sales Employee in Sales order

    Dear Experts,
    We wish to disable the changing of Sales employee in a sales order in VA02 mode. However, in VA01 we need to keep it open for editing.
    We have also tried through the customising in partner determination procedure but could not achieve the desired scenario as it disables ALL changes to the partner, both in VA01 & VA02.
    Moreover, we have tried through the Function module MV45AFZZ, as one of the messages in the forum suggested, for a similar case, but unfortunately could not call up the particular field in there for the sales employee. At best it responds to KUAGV-KUNNR, where as the sales employee is much below that.
    The soonest help is pleaded for.
    Thanks and Regards,
    Tariq

    Hi Smile,
    Thanks for the prompt response, but we did try as sugested for the user exitbut unfortunately we are unable to call up the screen field : GVS_TC_DATA-REC-PARTNER for the purpose.
    You would recall that the said field is identified by the partner function VE (Sales employee) and we intend to identify and attack THIS field for our purpose.
    Any further pointers please?
    Thanks once again.
    Regards,
    Tariq

  • How to track changes incrmd_order when employee responsible group is change

    Hi experts
    crmd_order , nj supportrequest , when the employee responsible group is changed in need to trigger email to newly entered emp responsible group after saving. i need to know where this changes of service employee group is captured.
    how to send emails to service emp group with logo. kindly help

    Hi Surendra,
    You can create an implementation of CRMD_ORDERADM_H badi and check if the is_orderadm_h and cs_orderadm_h values are same or different, and trigger the email logic depending upon the condition
    Prerna

  • You are not authorized to change the sales employee

    Hi everyone ,
    when I add an new bussiness partner not with the default sales employee ,I can't finish adding except  loging on the system using manager or superuser before. the system tells that "You are not authorized to change the sales employee". This problem had been raised by someone else already,But It still confused me .I have explored the problem in b1 system and has got these results like following:
    first ,there are three places where we can set default Salse mployee.        
               Path1     Administation/Setup/General/Sales Employees
            or  Path2   Human Resources/Employee Master Data/Sales Employee
            or   Path3  Administation/Setup/General/Users/Defaults/New/Defaults/Sales Employee
    If you add a new BP , the default Sales Employee will get the value from Path3 .
    If it is empty from Path3 ,it will get the value from Path2.
    If it is also empty from Path2,then it will get the value from Path1.
    There is Only one conditon that In Employee Master Data ,the employee is related with User and Sales Employee.
    My question is that since I connected employee with User I can't change the sales employee when adding a new BP.
    Another question is that since I connnected sales employee(Mike) with employee(Jone) I can't select the sales employee (Mike) as a sales employee when adding a new BP using other user loging on the system.
    There Is no problem if I  connect no employee with User.But If I do so ,How Can I do the Data Ownership Authorization.
    Edited by: Li Mishan on Apr 17, 2008 9:40 AM
    Edited by: Susanne Klemm on May 7, 2008 2:00 PM
    Edited by: Philip Eller on May 21, 2008 9:02 AM

    I forget to say that I had already give the user all Authorizations.I have copy the authorization from manager.
    One thing I am sure that :
    If you connet the sales employee with one employee,that means that sales employee can be only used by the user connected to the employee at the same time.others can't use it.
    If you connet the user with employee,that means ,when log on the system with the user,you can only use the sales employee that you connected with employee at the same time.you can't use others
    Edited by: Li Mishan on Apr 17, 2008 10:55 AM

  • Change IView in Employee Self Service

    Dear Expert,
    I want to change IView in Employee Self Service - Personal Information. Since IView assigned for my country does not consist of sufficient field required by my client, so I want to try to change IView in ESS to use IView from other country.
    Please help if you have any information about how to do this.
    Thanks & Regards,
    Febrianti.

    please check the name of the java application available for malaysia. I think it is sap.com/essmypdata/Per_Personal_MY now you need to go to the resource configuration in spro and change the name of the application.
    most important: I dont think this will solve the issue you have as if the employee belongs to a specific country and if you attach another country service then it results in config.
    The approach that I would advise is take the service decide the custom field and modify the service.

  • OLM-Updating requirements for LP when person type changed to ex employee

    Hi,
    When the person type changes to Ex employee and enrollments still exists (which have not yet been completed) the following error message shows up.
    USER DEFINED EXCEPTION IN PACKAGE OTA_DELEGATE_BOOKING_SWI PROCEDURE UPDATE_DELEGATE_BOOKING
    when trying to update the enrollment status to Attend for those people who were part of a Learning Path subscription list. On other cases (employee is not a subscriber to a LP) the enrollment can be completed (Attend).
    Has anyone experience this issue?
    Best regards,
    Roberto

    Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

  • If i made any changes for one employee means it get reflect for others

    Dear friends..
    I am Abaper, i am in Support phase, i am facing one HR issue. kindly give me some idea to solve.
    i have 2 employee number 2025 (VIJAYAN.M) and 2925 (VIJAYAN.M). in this both case employee name is same..
    if i made any changes for employee 2025 infotype (for eg bank details) means,  2925 also get reflect the same changes vice versa..
    Kindly give me some idea
    Regards
    Deva

    Hi! Deva,
    As you are ABAPer , and if you are doing it through some programing , then you must have getting same problem for all those employees who have similarity in their name or other,
    so, please check or debug what criteria you have given for search ,for changing/updating bank key field,
    check, it should be perner base not name base or any other.
    Please check and revert so that we try to resolve.
    Check one thing that is it only problem with bank key any other infotype also.
    *Sneha.

  • How do I change the network password without a base station?

    I do not have an airport base station. My roommate has a PC connected to a router via ethernet and I created a wireless network on the same router via airport. Now I've hopelessly forgotten the password and I can't figure out how to reset it or change it or whatever! Can anyone help me, please? I've searched the forums and have only found answers for those folks with the fancy airport base stations.

    Hi,
    The WLAN password could only be change on the router page you found and in order to get there, you need the administrator password.
    If you never modify it, you could give a try by entering "Administrator" and leaving password blank which is usually the factory setting. If this not work, it will be necessary to reset your router to its factory setting.
    I personnally do not know the Belkin routers. But here is the link to get your router manual:
    http://www.belkin.com/support/download/files/P74559-AF5D7230-4_man6-04.pdf
    Page 13 describe the reset procedure.

  • How to change title of Employee Master Data form (in add-on creation) in SAP B1 9.1?.

    Hi all,
    I have a problem of how to change title of my add-on in SAP B1 9.1.
    I created the add-on of Employee Master Data but I want to change its title, is it possible?
    When I change the title as (Member Master Data) in property, it will display Employee Master Data again.
    If it is possible to change it, how can I do?
    Please anyone can help me.

    Hi,
    Try this:
    If pVal.FormType = 60100 AndAlso pVal.EventType = BoEventTypes.et_FORM_LOAD AndAlso pVal.BeforeAction = False Then
      Dim oForm As SAPbouiCOM.Form = DirectCast(oApplication.Forms.GetForm(pVal.FormType.ToString(), pVal.FormTypeCount), SAPbouiCOM.Form)
      oForm.Title = "New Title"
    End If
    Or you can try:
    If pVal.FormType = 60100 And pVal.EventType = BoEventTypes.et_FORM_LOAD And pVal.BeforeAction = False Then
         Dim oForm As SAPbouiCOM.Form = CType(oApplication.Forms.GetForm(pVal.FormType.ToString(),pVal.FormTypeCount), SAPbouiCOM.Form)
    oForm.Title = "New Title"
    End If
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Changes performed when employee transfered from country to another country

    Hi gurus
    Can anyone explain what we need to change and configured if an employee is transfered from America to India permanently with the same organisation
    how his payroll, taxation, work schedule, etc will be
    please let me know
    Thanks & Regards

    The easiest fix would be to just use safari and a webmail interface.
    For example, I have yahoo in my mail app. But on some internet connections it just won't work, so I use safari to get to yahoo.com and access my mail that way.
    Your mail provider should have a web interface and you could use that.

  • Changing the report displayed on the basis of value selected frm the prompt

    Hi,
    I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
    The user will select the report name from the prompt, once done the report that has been selected should show up
    on the dashboard page and he should be able to select data on the basis of month and year from it.
    Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
    Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
    need two prompts one for report name and the other for month and year.
    Thx :)

    Hi Kishore,
    When i click on the link given by you it takes me to a page where a link is given with text as under
    Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
    And when i click on this nothing opens up.
    Thx
    Edited by: Phantasm on Jun 22, 2010 3:05 AM

  • How to send birthday wish mail to Employees on daily basis

    Hi ,
    How to send birthday wish mail to employee with greeting card as background image in Mail Content area.
    Is there any Standard program available in SAP.
    _Requirement:_
        Normal , Birthday Wish mail can be done through function module SO_NEW_DOCUMENT_SEND_API1.
        How to write program for getting , Greeting card as background image in Mail Content area.
        Is there solution in SAP .
    Regards
      Surendar

    Hi,
    Check this for embedding image in your email : Using CL_BCS to send email from ABAP
    And this about image as background and other related stuff : http://www.reachcustomersonline.com/2010/01/23/09.27.00/#faqs
    Best regards,
    Guillaume

  • Control to Stop Users Changing their Own Employee Master Data

    Hi all. I'm carrying out a security review of users on a SAP HR implementation as part of this we are looking at users that can change bank details, basic pay etc. I was wondering if there is a control in place on SAP that would stop a user with access to make changes from changing their own Basic Pay on the system. Thanks

    Hi Jonh,
        Sure there is a way to stop it; you have to use infotype 0105 + security object P_PERN, please follow this link to get more details: HR Authorizations Backend v/s ESS
    Hope that helps,
    Best regards,
    Federico.

  • How to change employee responsible for open campaigns.

    Hi,
    I want to find out open campaigns and marketing attributes based on partner function i.e., employee responsible and these open documents I need assign to another employee responsible. Which function module I need to read the details and which fm is to change employee responsible.  Please guide me which fm i need to use how I can change to another employee responsible partner function.
    divya

    Hi Divya,
    If you are comfortable with the bol queries, you can execute the bol query services to get relevant data..
    here is the sample code to get marketing attributes for a bp.. here you can read additonal attribute "partner function" to filter the data as per your req.
    Marketing Attributes
      DATA : lr_mktattr_coll TYPE REF TO if_bol_entity_col,
             lt_mktattr TYPE TABLE OF crmt_mktbp_attribute,
             ls_mktattr TYPE crmt_mktbp_attribute.
      IF lr_buil_entity IS BOUND.
        TRY.
            CALL METHOD lr_buil_entity->get_related_entities
              EXPORTING
                iv_relation_name = 'BuilMktAttributeRel'
              RECEIVING
                rv_result        = lr_mktattr_coll.
          CATCH cx_crm_genil_model_error .
        ENDTRY.
        CLEAR lr_entity.
        IF lr_mktattr_coll IS BOUND AND lr_mktattr_coll->size( ) GT 0.
          lr_entity ?= lr_mktattr_coll->get_first( ).
          WHILE lr_entity IS BOUND.
            CALL METHOD lr_entity->get_properties
              IMPORTING
                es_attributes = ls_mktattr.
            IF ls_mktattr IS NOT INITIAL.
              APPEND ls_mktattr  TO lt_mktattr .
            ENDIF.
            lr_entity ?= lr_mktattr_coll->get_next( ).
          ENDWHILE.
        ENDIF.
      ENDIF.

  • Condition type to be loaded on Material cost after Taxes but shouldn't change Tax base Amount.

    Customer requirement is that they want to deduct some amount after the Taxes (after BASB) &t load this amount value after taxes on Material cost  (hence accrual KEY can't  be used). but with the addition of this new condition type (for deduction) it shouldn't change the base amount  for Tax condition type (BASB).
    Basic Problem : new condition type value to be load on material (after taxes). but this condition value shouldn't change the Net price of PO(amount in BASB condition of Tax) so that base amount (BASB) of Tax procedure remain unchanged.
    (Since it is to be loaded on material hence i cant use account key definitely. Also this cost to be loaded on material after taxes)
    Ex -             PBXX =     100 base price
                     Freight =       20
       Tax base amnt =     120
                   Tax (5%)=          6
                          Total =    126
         Other Charges=      10  (this 10 Rs amount in this condition type required to be loaded on material cost, at the same time this condition value shouldn't change the base amount for the Tax (BASB)
    Please suggest (purpose is to load the deduction on material cost after Taxes & same time it shouldn't change the  the amount after Tax base calculation)

    Hi,
       Your condition type is without acrual flag in M/06. No acrual key is maintained in the MM pricing procedure.
       To achieve your requirement, maintain subtotal 6 against the condition type in your MM pricing procedure in M/08.
       Maintain the base type calc procedure as 362 against your BASB condition type in tax procedure. Keep the field blank for the tax condition type (VAT or CST / ED etc)
       Test the scenario again with a new PO. System will show the condition value in net amount field in PO, but the same wont be copied to BASB in tax procedure. Check the taxes pop up. Check the same and revert back.
    Note: Similar requirement (not exact) for acrual conditions are mentioned in my doc: Tax Calculation on Freight - Different Scenarios You may refer it if required.
    Regards,
    AKPT

Maybe you are looking for