Change Skype manager to Skype personal (family)?

I was trying to create an Skype account and did so on the wrong link (Skype manager)
I was intending to create a Personal Account
How can I change it to Skype Personal?

andrea_clarates wrote:
i have to eliminate the admin account from skype manager. how can I change the administrator with another user in the company network ?
thanks all for help !
Hello Andrea,
You can promote one of your business users to a managed administrator in Skype Manager.
Here is the link to the Skype Manager user guide:
http://download.skype.com/share/business/guides/sk​ype-manager-user-guide.pdf
Step by step instructions detailing how to promote a business user to an administrator may be found in section 4.6.2 on page 23.
To make a member an administrator of your Skype Manager:
1. View the details of the member who you want to make an administrator.
2. Under Skype Manager settings, check Make this member a Skype Manager administrator.
3. Click Save changes.
Hope this helps.
Regards,
GaryB
Skype Enterprise Support

Similar Messages

  • Skype (personal account) cannot add Skype for business user who is on office 365

    Dear Sir, I able to search contact on office 365 users, but I cannot add them to my skype. As a workaround, I ask my friend who is using office 365 able to add my skype (personal account). Could you help to check and fix this problem? Thank you. B

    Hi,
    As mentioned the Lync Server is not up-to-date, based on my knowledge this is why the issue occurs.
    Please refer to this article below:
    https://technet.microsoft.com/library/dn954919.aspx
    You can configure the client experience only if you are running Lync Server 2013 with the December 2014 Cumulative Update (5.0.8308.857) or later installed. The latest one is:
    KB 3036869 February 2015 Cumulative Update 5.0.8308.871 for Lync Server 2013 Core Management Server.
    You can specify the client experience the users in your organization will see by using the
    Set-CSClientPolicy cmdlet with the EnableSkypeUI parameter:
    Set-CsClientPolicy -Identity Global -EnableSkypeUI $true
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

    Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • How I can change skype name ivokaryon to ivonoros

    How I can change skype name ivokaryon to ivonoros

    Hi,
    I answered similar question already, please have a look at: http://community.skype.com/t5/Subscriptions/Change-Skype-username/m-p/674137#M9159
    If my answer helped to fix your issue, mark it as a Solution to help others.
    Thank You!
    Please send private messages only upon request.

  • Skype Personal Phone Number

    I just got a Skype personal phone number.  At least I think I did.  I selected a number and was told
    that this now was my new new number, but no panel flashed up for payment.  I have an annual
    subscription already so I figured that they just used my previous payment method.  
    I read the material about the personal phone number and how it works with mobile devices to
    be able to receive calls, but I didn't see any description of working with a desktop computer.
    Does the phone number work in regards to receiving non Skype calls?  I had my wife call me
    and there was no ring on the computer and I couldn't retrieve the message that she left. 

    i am meant to*
    received my phone number*
    typos, sorry

  • Change Skype iOS event sounds in iOS 8+ ?

    Can I change Skype iOS event sounds in iOS 8+ ?

    Hello there Chesterg1,
    It sounds like you want to sign in with a different iCloud email address on your device running iOS 8. You can do that in Settings:
    iCloud: Change iCloud feature settings
    On your iOS device: Go to Settings > iCloud, then at the bottom of the screen, tap Sign Out (Delete Account in iOS 7 and earlier).
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • ''Change'' Skype username???

    Hy. As I can read Skype admins said, changing Skype username isn't possible becouse of security reasons. I have to make objection about this claim. If this is security problem why Skype administrators didn't solwe problem as my???
    One day when I try to create my Skype account I realised that somebody used my email to make Skype account. Then I reset Skype account password of this account ([Removed for privacy]) and configure this account as my. I explored and found out that some guy from Bosnia use my e mail address to create Skype account. I change his profile and password and he lost his (my) profile becouse he was unable to use my E mail address and he can't reset password or do something else.
    This all isn't problem (mybe this guy have similar E mail address and he mybe make mistake when he wont to make his own Skype account) but problem is that I have Skype user name ([Removed for privacy]) of this guy but not my becouse I'm (tomislav.medurecan). Becouse of that I would like to change my Skype user name.
    What can Skype admins say about this problem???
    P.S. sorry on my English

    I fully agree with you. I think it is ridiculous that Skype will not allow people to change usernames, I have read of some very valid reasons for wanting to change a username (including your reason). One reason given on another thread was about a transgender female who has now legally changed her name... yet Skype cannot similarly facilitate her name change on their system... incredibly insensitive and discriminatory in my opinion.
    SORT IT OUT Skype and get up-to-date with your security processes to allow the option of username changes.

  • Creating a New Task in SOLMAN Change request Management

    Dear all,
    We are using SOLMAN 4.0 and scm functionality.In the change request screen we have a create follow up task(+ icon on top left).What is the use of this task,can we asign a task to some particular person?for example can i assign task to tester?If the task has not completed the task,while closing the correction will it give error?
    Please give your suggestions.
    Thanks in advance,
    Avinash.

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Changing the Management Pack extensions or items are stored in

    I think I know the answer to this but I will ask it anyway. Is it possible to change the Management Pack an extension or an object such as a Queue or Subscription is stored in?
    Reason I ask is the person that was maintaining SM before me stored every single form extension, subscription, queue and view etc...in the same Management Pack. I really don't like this particular setup and I am sure its not best practice. I plan to break
    out all the above and possibly more into separate newly created Management Packs, like a separate one for Views, a separate one for Subscriptions etc.... Is the only solution to delete the existing item and create a new one with the same details including
    the display name?

    You can, but not as easily as you would like. 
    Essentially, what you would need to do is split up the the XML by hand, making sure to sort out the DisplayStrings sections to the correct components. Export out the "main" MP, cut out a section of XML that represents the form extension, paste
    it into a new file with a new name, add a reference to the new MP to the main MP, and replace all references to that object with MP Aliases to that object's new home. Import both the new MP and the reduced "main" MP back into the database. 
    there are two problems thou:
    Some objects, like projections (used in form extensions created by the authoring too) and class extensions should only ever be stored in sealed MPs, because removing them causes data that reference them to be invalid, i.e. properties defined in class extensions
    are lost if that class extension is removed and re-added, and templates that depend on projections are inaccessable if the projection they are based on is lost.
    some atomic SDK objects, like workflows, consist of several non-consecutive XML sections, meaning you would need to trace the references and identify which of many <Rule> and <Action> sections belonged with which workflows, and make sure they
    would all end up in the same MP. 
    now you could do this slowly, pulling sections out of the "main" MP and replacing them with references over various nightly downtimes, exporting the "main" MP and carving out a few objects, then importing the trimmed down "main"
    MP and the new single use MP until you had something resembling best practice functional isolation (all Change request notification over here, all service request workflows over there, etc), and the hollowed out husk of your "main" MP as a miscellaneous
    container, but i think you'll find that you still have to face and deal with data loss and breakage, potentially a lot more trouble then it's worth. 
    Given that, i would instead propose that you give up on correcting sins of the past, and start doing it right now. start setting up your new MPs and put new thingss into them, and while you're working, anything that you can easily rebuild. Make a plan to
    rebuild your templates and form customization. start identifying class extensions you'll have to rebuild, and work up a plan to export data defined by them somewhere (probably powershell and CSV) so you can restore it when the classes are restored. 
    Like most data hygine problems, there isn't an easy bulk application answer. you just have to look at everything and clean it up as you go. you can mix salt and sugar quite easily. UNmixing them is a lot more work. 

  • HI - I want to change my creative cloud from personal to business. I just registered my company. It's just me, so I just need one licens

    HI - I want to change my creative cloud from personal to business. I just registered my company. It's just me, so I just need one licens

    I think you will need to cancel what you have and buy new
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    -http://www.adobe.com/creativecloud/buy/business.html
    -team plans https://creative.adobe.com/plans?plan=team
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0
    BUT... contact Adobe (this is an open forum, not Adobe support) to be sure you don't have to pay a cancellation penalty
    Adobe contact information - http://helpx.adobe.com/contact.html

  • Help me configure Change request management !!!

    Dear friends,
    I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
    Just want to know Clear few things before i proceed..
    I am also refering SPRO and related notes
    Scenario :
    I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
    R03 has 3 clients, 300 600 700..
    In R03 300 is the development client, 600 is quality client, 700 is the production client.
    SOL has 2 clients, 100, 200
    With 200 as the production client.
    Q.1) <b>Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).</b>
    Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
    When i logon to client 200 and  Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
    Then by default it take the previous client ( client 100) as the change request management client.
    ( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
    I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
    <b>Plz let me know what do i do to set the change request client to 200??</b>
    Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
    We are planing to establish domain links between the two systems( ie both the domain controllers) ??
    Is this the right strategy ??
    <b>Any other method that u can recommend  ??</b>
    Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
    Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
    When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
    These destinations works well,
    but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations  i test these destinations using Remote Logon i get error,
    " no authorization to logon as trusted system"
    I went thru one note which recomended Kernel upgrades to solve the problem,
    I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
    <b>what is your kernel patch levels in sateliite and solman systems.</b>
    Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
    We also create RFC destinations to client 000 of all the sateliite system,
    <b>dont u think these RFC destinations might interfere with each other??</b>
    Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the  configuration documents with me..
    Please note :
    <b>All the contributors would be handesomely rewarded with points .</b>

    Hi,
    Check this
    Note 128447 - Trusted/Trusting Systems
    For your Q4.
    Q3.)
    Establishing Domain link - That's the right way. Go ahead.
    These are the steps.
    <b>1.Define Transport Routes for System Landscape</b>
    assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
    <b>2. Activate Extended Transport Control</b>
    The CTC parameter should be '1'
    <b>3.Configure Transport Strategy</b>
    Deactivate the QA Approval.
    <b>4. Activate Trusted Services.</b>
    5.Activate Domain Links.
    You have to activate domain link between systems.
    6. Generate RFC Destinations to Client 000
    Hope this helps.
    feel free to revert back.
    --Ragu

  • How to change the default date in Person assignment tab?

    Hi experts,
    Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
    Thanks and rgs,
    Michelle

    Hi Michelle,
    Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
    Hope this is useful...
    Regards
    Aatish

  • SOLMAN- Change Request Management

    we have a request from one of our customers a big insurance company, to use the "change request management" out of the SOLMAN for non-SAP solutions.
    is it possible ? what are the advantages and disadvantages?
    thanks
    Amnon

    Hello Amnon,
    SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
    Please use the following links which may help you in a better way....
    Manually registering a non-SAP system in SMSY
    http://www.sappro.com/downloads/NonSAPsystems.pdf
    SAP Solution Manager Ready
    SAP Solution Manager Ready
    A General overall discussion on Solution Manager http://www.sap.com/platform/netweaver/components/solutionmanager/index.epx
    Hope it helps.
    Cheers,
    Satish

  • Solman Change Request Management Issue - about create task list

    Dears,
        We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
    Thanks
    Roger

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Change Request Management  "There is no task list for this project"

    Hello!
    I would like to use the functionality of CharM in SOLMAN 4.0.
    When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
    If I create my own task list via Task list --> create
    I get the warning "You cannot change task lists in the SAP namespace"
    What are the steps to define task list for my project?
    Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
    The second warning I get: "NO CTS projects created yet" or
    "The Solution Manager project does not have an active CTS project yet".
    How can these warnings/errors be corrected?
    Thank you very much!
    regards

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

Maybe you are looking for