Change Smart View default colours for all clients

I need to change Smart View default colours. But it must be done in a centralized way, so I can not set it up at the client level. I'm not sure if Smart View takes defaults from planning.css styles, or if they're defined somehow at the provider, or maybe specified in client installer.
Thank you in advance for any guidance on this.
SD

SD,
You may want to work with Oracle SmartView Support, to see if / how it is possible for SmartView, using a Service Request.
Thanks!

Similar Messages

  • Changing file clicking default behaviour for all users

    Is there a way to change the default file clicking behaviour for all users? Each user can do it himself by going via the username menu ("Personal Preferences", "When clicking on a file...") but I would prefer to set it for all users to a value that is different from the default.

    Hi Ganesh,
    Can u pl post how you solved this.
    Regards,
    Reema.

  • Change default homepage for all windows terminal user profiles

    would like to change homepage,bookmarks,proxy settings for all user profiles on windows server 2003/2008

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    *http://kb.mozillazine.org/Locking_preferences
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
    *http://mike.kaply.com/2012/03/22/customizing-firefox-advanced-autoconfig-files/

  • How do you set default programs for all users when deploying Windows 8.1?

    I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
    to be the default for opening pictures, videos, etc. Can that be done?

    Great question, this has been bugging me too!
    So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
    After filtering out the junk, I could see some *interesting* writes to the registry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
    "Hash"="57y87/ogggU="
    "ProgId"="PhotoViewer.FileAssoc.Jpeg"
    But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers.  This is both good news and bad.
    Background:
    One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
    just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
       Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
    Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
    Solution:
    This blog appears to have the answer:
    http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
    New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
    was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
    From:
    <Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
    To:
    <Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
    I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
    perhaps seperate GPO's for Desktops/Laptops vs Tablets?
    -k
    Keith Garner - keithga.wordpress.com

  • It should be possible to set default behavior for all file types

    It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
    And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
    ''edited to remove swearing''

    I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
    That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
    represents the change I just made when applying Detail view to all Picture folders.?
    This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
    settings), and this is the result:
    this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
    NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
    independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
    performance or reliability.
    Yolanda Zhu
    TechNet Community Support

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • How to set the default settings for all users in 11.1.1.3

    I have couple of questions
    1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ?
    2. How can I set the defalut setting for all the users so that they can see the same page when they log into Workspace ?

    For workspace have a read of - http://docs.oracle.com/cd/E12825_01/epm.111/bpmui_admin/assigning_default_preferences.html
    For planning you can't really set it without hacking tables.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Set default password for all users including csv file

    I would like to set the default password for all users
    including the ones imported in the csv file?
    Also now the default passwrd in set to the email address. How
    do i change that setting to the "login" setting in the csv file so
    those users can loin with that password?
    Kinda the same question but do yuo get the idea?
    Thank you,
    Chip

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • Set a default layout for all users via DIAPI

    Hello everyone,
    I am attempting to set a default report for all users/business partners using the DI-API. 
    I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
    If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
    Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
    (stripped down for clarity)
    Dim oDefaultReportParams As DefaultReportParams
    oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
    oDefaultReportParams.LayoutCode = sMyLayoutCode
    oDefaultReportParams.ReportCode = sMyReportCode
    Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
    Code executes fine, but it doesn't have the expected impact on settings.  The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
    I experimented by including and setting the following properties to every combination I could think of with the same results
            oDefaultReportParams.UserID = 'tried 1, 0, -1
            oDefaultReportParams.CardCode = 'tried "", "0", "-1"
    Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
    Thanks!

    Hi,
    Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
    Thanks.

  • Make firefox default browser for all users without firefox checking for default browser

    Hi,
    we have 2 citrix servers in the same farm . We want to make firefox the default browser for all of our users.We also want to ignore the settings that they decide themselves influencing the default browser.<br />
    Now the citrix forum suggested that i made a gpo that edits the folowing register keys:
    HKCR\http\shell\open\command Change the value in the default key to firefox.exe location.<br />
    HKCR\http\shell\open\ddeexec Change the value in the default key to Firefox HKCR\https\shell\open\command Change the value in the default key to firefox.exe location.<br />
    HKCR\https\shell\open\ddeexec Change the value in the default key to Firefox
    so i did that , and all our links now open through firefox.<br />
    However we still get the question to make firefox our default browser while it already is defined as default browser since it opens links using firefox.
    the 2nd strange thing we encountered is when we open pdf's using firefox , firefox opens but the pdf's won't open untill we make firefox default browser using the provided popup window when we start firefox<br />
    i have googled this for days now without a proper answer . i even tried to run the "firefox.exe -silent -setDefaultBrowser" command to fix it on my personal profile without any luck.that's why i am relying on your answer

    Just in case, check this article for the missing information
    [[Setting Firefox as the default browser does not work - What to do]]

  • CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

    HI,
    We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems.  The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems.  However, when I try and run the following command
    Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
    "property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later.  The object's currant version is 0.0 <6.5.6500.0>"
    What object is this reffered to?  Can anyone help please?
    Thanks
    Paul

    Hi,
    To set a default font for all users, you can use this command: -
    Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
    You can use any font style in place of “Trebuchet”.
    I hope this information will be helpful for you.
    Thanks and regards
    Ashish@S 
    Ashish@V

  • How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

    How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
    Thanks in Advance
    NTRao

    Hi,
    There are numerous ways to change the cache size.
    You could deploy a vbscript to a collection of the devices.
    On Error Resume Next
    Dim UIResManager
    Dim Cache
    Dim CacheSize
    CacheSize=20000
    Set UIResManager = createobject("UIResource.UIResourceMgr")
    Set Cache=UIResManager.GetCacheInfo()
    Cache.TotalSize=CacheSize
    Or you could use a configuration item.
    http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
    You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
    http://www.nowmicro.com/recast/right-click-tools/
    http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
    select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
    https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

  • Setting the Default Homepage for all current and new users but leave it user modifiable.

    I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.

    > The locations of the files are different and none of them show up under
    > the new user, but do show up for existing users.
    Enable logging for GPP files to see what's happening:
    http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

    In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
    I've tried everything to get a custom umask set for all apps. It just seems impossible...
    Is there a replacement for launchd-user.conf?

    Please file a bug report: https://bugreport.apple.com
    I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

  • Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

    We are currently looking to set the default preferences in the CMC for all of our users.
    I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
    The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
    I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
    Thank you

    I thought I could just run it too but when I attempt to I get a Windows Script Host error:
    Script: C:\User Prefs.vbs
    Line: 1
    Char: 1
    Error: Expected statement
    Code: 800A0400
    Source: Microsoft VBScript compilation error.
    I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong.  I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

Maybe you are looking for