Change Source File Name

Hello,
Sometimes when I change the name of songs or videos in iTunes, the name of the source file changes, and sometimes it doesn't.
When I say "source file," I mean the name of the file that comes up when I look at the contents of a folder via "My Computer" in the Windows interface.
I'd like a change of the iTunes name to always change the source file name. Can anyone help?
Thanks
Ben

i added music to a clean, newly installed iTunes from a music folder on my desktop with subfolders for different cds that i downloaded recently. after i added those folders to iTunes, i changed the artist names and album titles. the files changed in the folder on my desktop...the only thing that won't change is the song title...it's odd!

Similar Messages

Imported source file name changed for the external table

Hi,
I have external table from flat file. Now the source file name is changed. I can change the file location to point to the new file name, but I can't update the source for the flat file property(as seen under flat file properties,structure tab. the column "Sampled From"). Is there way to have this update without having to import the file using the new file name again?

In the Files section in the object navigator find the flat file you want to change the source of.
Double click on the actual file, and on the General tab change the old file name to the new one.
The fact that it has been sampled from a different file should not 'disturb' the working of the external table.
However, if the structure of the new file is different I'd suggest to resample.
Good luck, Patrick

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Get source file name in the structure itself or in the payload

Hi everyone,
I have a task regarding mapping
In my structure , i defined a field for Filename . What I need is, what ever source file name am sending, that should be mapped into this filed.
If am sending inputfile.txt.
My output file should appear like this,
<?xml version="1.0"?>
         <message id=u201DmessageIDu201D>
                 <header>
                         <filename>D:\\inputfile.txt</filename>
                 </header>
                 <body>
                          FileContent
                 </body>
         </message>
Any help would be appreciated. Do I need to create any UDF. If So please provide.
Regards,
Varun

Hi Varun,
are u using the same UDF that I replied. also note that the variable key should be declared only once.
Use this without changing any thing. It works for me...
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String dir = conf.get(key);
return dir+'/'+ourSourceFileName;
Also let us know where do you het this error..
Thanks
SaNv...

RH10 variable and build tag source file names

I'm using RH10 and outputting to WebHelp. My company requires that I archive project source files to our CVS via Eclipse. I am not using RoboSource_Control and must use the company's development resources for archiving.
Since archiving the initial project, I have been uploading only source files with modified dates.
However, I have discovered that the files I thought were storing user variables and build tags are not the correct files to archive. Since I am uploading all files with a newer date and that's not working, I need to know the user variable source file name and the build tag source file name that stores the currently defined variables and build tags.
I have already tried the WebHelp forum and was directed to this forum to pose the question because I'm looking for source file information instead of output file information.
Thanks for your help!
karen

Yes, Eclipse does work that way. However, we do not use our development directory as the local Eclipse repository. I need to move changed files to the local repository (stores all source files in the project) so that Eclipse can upload changes to the server. Yes, this is planned redundancy.
That said, it is not acceptable to spend the time copying all files in the large projects from the work folder to the local repository. I simply need to know which individual files to copy that include the currently defined variables and build tags. Note, we do not copy the SSL folder output files to our local source file repository, or other associated reference files that are not actually project source files.
Can you find someone who knows which files I need?
Thanks,
karen

File Sender adapter - source file name - weird

Hi all,
We have a sender file adapter polling an ftp location. The Dynamic config has been enabled to get the source file name.
The actual file name is - "hrmd.xml", but in the dynamic configuration node, in sxmb_moni, the fileName is shown as ./hrmd.xml.
This does not occur with any other file sender adapter comm channels polling ftp locations.
I guess this has something to do with the ftp server. Did anyone face this issue?

the fileName is shown as ./hrmd.xml
The file name surely cant have a / in it....such characters are not allowed.
is there any way we can change the fileName message attribute once the file is picked up
Create a UDF for Dynamic Configuration and change the name as per your requirement (in XI)....the source file may be having proper format for name and i assume that you have to change it for receiver file name

Source file name

Hi my mapping is sql loader mapping,
i want to capture the source file name and make in lower case . owb is 11.2.0.3 .
please help

you can pass the file name in as an input paramter so you can dynamically change it when the mapping is invoke, not sure if that is what you want, you have to know the file name first when you are loading orelse it means you hardcode it in the mapping config.

** How to get Source File Name thru XSLT Mapping

Hi friends,
We require source file name after message processing (SXMB_MONI) in the output structure. We understad from Forums and blog 2664, this is possible thru UDF - DynamicConfiguration class. This UDF will work if we use message mapping. But, in our case we are using XSLT mapping. So, how do we call the same from Java Pacakage ? (Imported Archives). For writing java class separately, what are the changes to be made in the program?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Kindly reply, friends.
Kind Regards,
Jeg P.

Hi,
This is the example in this similar manner u have to call the method in which u have to write the code for picking the source file name.
<name>
   <xsl:if test="function-available('javamap:concat')">
    <xsl:value-of select="javamap:concat($first, $last, $inputparam)"/>
   </xsl:if>
</name>
for reference check the Link,
http://help.sap.com/saphelp_nw04s/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
Regards,
Phani

Changing the File Name

Hi
i am designing a adobe form which will be send in mail when a button is clicked, i found that the attachment name to be "unknown.pdf". how can i change this ???
i found out a method called getAcrobatApplicationName() in XML and when i changed application name in that its not getting reflected. So is there any other way to change the file name on "Button Click" event?
Thanks
Gopal

Hi Gopal,
See if it helps:
In NW2004s we use the following. getPdf() returns a byte[], the filename is "document-<username>.pdf" and source is the attribute of an IFrame UI element.
code
private void initPdf() {
IWDResource resource =
WDResourceFactory.createResource(
getPdf(),
"document-"
+ WDClientUser.getLoggedInClientUser().getSAPUser().getUniqueName(),
WDWebResourceType.PDF);
String source =
resource.getUrl(WDFileDownloadBehaviour.OPEN_INPLACE.ordinal());
wdContext.currentContextElement().setSource(source);
[/code]
On NW2004 we use a FileDownload UI element (with target=_self) and we call initFileBinaryType method in the wdDoInit method. Of course you still need to set the binary PdfData context attribute with the actual content of the PDF file.
code
private void initFileBinaryType() {
IWDModifiableBinaryType pdf =
initFileBinaryType(IPrivateTestAppView.IContextElement.PDF_DATA);
pdf.setFileName("document-"
+ WDClientUser.getLoggedInClientUser().getSAPUser().getUniqueName());
pdf.setMimeType(WDWebResourceType.PDF);
private IWDModifiableBinaryType initFileBinaryType(String attribute) {
return (IWDModifiableBinaryType) wdContext
.getNodeInfo()
.getAttribute(attribute)
.getModifiableSimpleType();
[/code]
Regards,
Arafat

How do I map the source file name to a target table?

I am mapping a source fixed length flat file to oracle target tables. One of the tables is a parent transaction table that stores the date, record number, status, etc. and the file name of the source flat file. The file name will change daily because the date is part of the naming convention. Is there an easy way to determine the source file name and map it?
One option a co-worker is working on is writing a pre-mapping stored procedure. It would insert the file name into a table prior to the mapping. But I was hoping for a cleaner solution.
Thanks!

Hi
Use extarnel table to load the data from the file into the table.
Create a procedure which changes the external table definition as the filename chnages.
Use this proceudre in the mapping as a premapping process.
Ott Karesz
http://www.trendo-kft.hu

Pdf portfolio source file name and date in file details

Is it possible to import the source file name and extension as well as the source file created date in the portfolio file details? Need to document source to portfolio in working with 3rd parties that will only have the original source. Need to document what was converted into pdf as not all files in a directory will successfully convert to pdf. Sometimes need to convert 100's of files. Manual entry is inefficient. the file names and modified dates are displayed on the Combine Files dialog. is there a way to capture the detail on that page?

I don't need the detail of when the pdf was added to the portfolio. I
need know which dwg or jpg or word file was converted and the original
created date of that file for control of information.
That is impossible; sorry. For some *very specific* types of conversion to PDF the pdfx:SourceModified XMP tag will be set to show the last-modification date of the source file (for example DOCX files converted using MS Word), but there will never be a human-readable record of the source filename or its creation date unless you have manually added them as document XMP properties after conversion (this is what the "Custom Properties" dialog is for). To embed source data automatically would raise no end of privacy and security problems for customers, who most certainly do NOT want their recipients seeing details of internal documents.
Without writing a plugin there's no access to the internal workflow of the Combine Files dialog, so you cannot use a script to read the names and dates of the files *before* conversion and store them automatically in the new PDF Portfolio's Fields array.

If I change a file name, how can I get all the links to update?

I've recently finished my webpage
(kensingtonconcertseries.com),.....then my client wanted to change
the name of one of his pages from 'Marold Duo' to
'Rodewald-Morebello Duo.' All of my links to that page are to the
original page(MaroldDuo.html). Arrrhhhhh!!! Is there anyway I can
change the name of the page and have all the links within the
website update automatically?
I figured out my problem...make a copy and rename it and put
it on the server. Simple....eventually, I'll have to get rid of the
original file, but for now works well.

On Sun, 3 Feb 2008 22:55:19 +0000 (UTC), "kai1111"
<[email protected]> wrote:
>I've recently finished my webpage
(kensingtonconcertseries.com),.....then my
>client wanted to change the name of one of his pages from
'Marold Duo' to
>'Rodewald-Morebello Duo.' All of my links to that page
are to the original
>page(MaroldDuo.html). Arrrhhhhh!!! Is there anyway I can
change the name of
>the page and have all the links within the website update
automatically?
If you change a file name within Dw's File manager - it will
offer to
update all pages linked to it, accept that invitation
~Malcolm N....
~

How to change the file name of pdf file in html page?

Hi,
Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
i did the the javascript part by using batch processing.
now i want to call those pdf files one after another without changing the file name in html page
the code written in html page is
<html>
    <body>
        <object id="PDFObj"
                data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
                type="application/pdf"
                width="100%"
                height="100%">
        </object>
        </body>
</html>
So every time i have to change that file name to acess another file.
Is there is any other way to sort this problem????
Plz anyone help me to sort out this problem with some code or some example.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

Dynamic File Name depending on the Source File name

Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name                 Targer Folder/Filename
NK01.VR59.L2007030         VR59/Rec.l200
NK01.VR71.L2017030         VR71/Rec.l201
NK01.VR77.L2027030         VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
Vijay

Hi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN

Change Source File Name

Similar Messages

Maybe you are looking for