Change standard task TS10407972 TotRejectSC to General Task
In our current SRM, task TS10407972 is not marked as General Task and no default rule defined. We are upgrading the SRM and mark this task as General Task. Now we found that all the incomplete workitems of this task were forwarded to every users.
What is the proper way to avoid this? Thanks.
Regards,
Donald
Hi Masa,
TS10407972 is not a general task before upgrade. I also found that the workitem of this task did not forward to SC owner, it has no agent. I can use SWI2_ADM to forward the workitem to agent as long as the SC owner is still valid.
Regards,
Donald
Similar Messages
-
I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?
Hi Atiq
Now that's concerning.....!!!
This error usually shows up when the workflow is not able to resolve the outcome of the decision....no branch is there for the selected decision.
Since, the standard workflow is also going in an error....this is something wrong...
Did anyone play around with the standard decision task?
I am not sure if this will help, try generating the task and standard workflow by executing the FM SWD_WFD_REPLICATE_FROM_9999 from SE37 directly. First, generate the task (give full task ID TS00008267 as the input and execute; and then the standard verification workflow in the next exec).
Try and test again...if this works, generate your custom workflow again like this.
The above is a pure guess and I am not sure if this will work.
Regards,
Modak -
Change of description in standard task TS 10407929
How to change the description for standard task TS 10407929 in T code pftc_chg, it says, to maintain the object TS 10407929 in its original language Deutsch.
hi George,
use the TX pftc, select the task 10407929 and view (not change).
Basic Data Tab you will have a button "redefine work item text"
As far as I know this should work also in english language -
Hi,
I'm trying to set up notification of successful postings of inbound ORDERS IDocs. Is there an SAP standard task that I can use that must be started based on the occurrence of the SalesOrder.CREATED event?
Regards,
FrancisHi,
I found the solution by myself. But I dont know how well this solution works consistently.
We have a BADI(QISR1) implementation which populates the default data for ISR form.
I got a method <i><b>SCENARIO_PROCESS_USER_COMMAND</b></i> where I kept my checked if <i>FORM_VIEW = ISR_APPROVE</i> and <i>MODE = CHANGE</i>, then I called <b>ISR_SPECIAL_DATA_SET</b> function module to update the special Data. I got the notofication number from General Data workarea.
This bought the PERSISTENCE at each level. Now, I could see the changes made in one level in other levels.
I hope this solution works consistently with out any side effects.
Regards,
<i><b>Raja Sekhar</b></i> -
Using Workflow in CATS instead of Standard Task ??
Hi All,
We are using CATS on ESS to allow users to enter their overtime and time related payments. The Data Entry Profile is configured with 'Approval Required', 'Workflow approval' and 'Automatic recipient' selected. We have entered a standard task which all seems to work ok. Issue we have is that the business requires additional functionality where if a manager does not process the approval request within a no of days that the request is escalated to the next manager. They also dont like the message content in the rejection message that is sent to the employee when the manager rejects the request. We could do this if it was a full Workflow being used but since the configuration only allows you to enter a task and not a workflow we are trying to find a workaround. Looking at a couple of possibilities around triggering a workflow separately. Has anyone come across this requirement and can suggest any workarounds.
Thanks,
Sinead.Check if your requirement can be addressed using configuration, transaction code BBP_PO_ACTION_DEF.
Action Profile = BBP_PD_BID
Processing Types = Smart Forms Mail
And change the settings below accordingly.
Cheers. -
Error in WF Customizing, Standard task TS00008267 does not exist
Hi Experts,
I need your help with the Workflow Customizing (SWU3). After doing the automatic customizing, I am getting an error "Workflow: No workflow definition found" when I try to start the Verification Workflow. So I decided to execute each component in SWU3 and I found out that when I execute "Classify Decision Task as General", (though it is checked/green), it says that "Object TS 00008267 does not exist".
I checked in tcode PFTC that the task is really missing in our Development server, though they exist in QA and production.
What should I do to get this fixed? I really don't have any idea. Should I apply a patch, install something, or create TS00008267? I can't find anything on the net that solves this problem.
Thanks in advance.
Regards,
DNHello Dexter,
I see you loked at the other tread which I just responded to. I have copied my reply below.
If you find that all tasks are missing and not just TS00008267 then it is most likely an authorisation issue. Run transaction
SU53 to see what authorisation objects your user is missing. It is related to Org Management authorisations.
If you have to transport it try transaction SE01 (Transport Organiser) it is possible to transport from system to system. Just click on Create button and then select 'Transport of copies'. Then just enter you target system and save. You can then add the
objects you wish to transport to your Target system.
Example:=============================
R3TR PDTS 00008267
In SE01, click Create => Transport of copies
=> Name the request and save
=> Click 'Include Objects' button and choose 'Freely selected
objects'.
=>Enter the Development class SWD and click 'Selected
Objects'. F4 at the bottom of the list (Under the DTEL
entry) and select the entry "R3TR PDTS" and click OK.
Now enter the task ID 00008267 in the dialog box
opposite it and click the checkbox (See attached screen
shot) and then click the Execute button.
=> Expland the list and goto the task
=> Select 00008267 and click the "Save In Request"
button.
You can do this with any standard tasks you want to transport to your system.
Hope this helps.
Regards,
Eddie -
Classification of SAP standard task
Hi,
I want to set up a substitution profile for Leave approval.
I have setup new Substitution profile.
I have setup new task class.
We are on ECC 6.0 EHP7.
We are using SAP standard workflow and the SAP standard task 12300097 for leave.
Is it okay if I update the classification property for this task with my newly created task class?
Best Regards
ArindamYes, the classification is master data. it's the same as defining it as a general task (same screen too).
-
Help on how to add an Standard Task to a position
Hi all!
I would like to know if someone can explain me how to assign a an standard task to a user/position via TCODE PFTC.
Thanks in advance for your help!
AndreaRose,
Don't add anything in Expression (workflow step) and add your positions or jobs or dierctly user or Org unit to the task all the people under that org unit or position or job or users which are assign to that task will recieve that mail.
Now after this if you add a rule in Expression (workflow) then if you get somebody from that rule who is not assigned to the task he won't recieve the mail.
Responsible agents are generally assigned at workflow step level but they can also be assigned at task level.
Responsible agents should also be possible agents....hope you know this. -
How to format the Workflow standard task description
Hi experts,
I am trying to put an SAP icon in the Workflow standard task description. But it is not appearing.
Also, is there any way to change the color and font of the text entered in the the description of the standard task?
To put an icon, i am following the steps mentioned below:-
then I am choosing a particular Icon, and its corresponding code comes in the editor, <718> in this case.
But the output does not show any Icon.
Please advice.
ThanksHi argadip,
Please help me tooo...
Task has been transported from develpment client to another client for integration testing.
in the shopping cart advice product has been created by the employee.
then it goes to advisor for the approval
This has been done by the workflow.
It is implemented in both dutch and english.
English - it is working fine.
Dutch - the task is not defined.(the code is missing)
after transporting , we did changes in the task created for implementing this approval description.
It was working fine in both dutch and english.
But the corrections in the code are there....
only in the output After transported to another client dutch part approval description is not correct some part of it are missing
Is the problem related to the transport or with the modifications of task defined ??
Can anyone suggest me how to solve this problem. -
TS - Standard Task object type
Hi Gurus,
I am trying to assign the object type TS - Standard task for the tcode - PO13 (position), but i am getting the error as Standard task does not exist (ID of related object field). I have searched in R/3 to create TS - Standard task, but not available. Please suggest me where to be done.
Vijay.Standard Task mainly used by Tech consultants in Workflows.
Inputs from SAP doc......
The standard tasks provided by SAP are generally used as steps in a workflow template. They are available as "modules" which you can use for your own developments.
If a workflow scenario only involves one standard task, it can usually be regarded as a minimal solution for showing the connection between application functionality and SAP Business Workflow. For differentiated workflow management, this standard task should be replaced by a customer-specific workflow task
Mohan -
Removing the user from standard task group
Experts,
I need to remove the one user from the standard task "Display MC Document (outbound w/o IDoc)". Since it is a standard task I'm not able to make any changes.
I hope I need to change in the agent which is assigned to this task. But donno how to find the agents assigned to this task.
Please help me in resolving this.
Thanks,
NaveenHi Naveen,
If that user assigned as the 'Possible agent' of the task then you can remove the user easily.
In the workflow template, go that activity. Under the Task ID there is a option called 'Agents' and click that icon to open. In the new screen, the possible agents of this task will be displayed.
Select the desired user and delete it.
Thanks,
Viji. -
Edit the standard task mail Text
Hello Experts,
Could any one help me to change the text for the standard task mail content. Here I am applying a loan and approver approves the task this generates the mail and mail is being received. But I need to change the content of that mail as per my BP. Where can I find to change the content.
Thanks & Regards
Kannan
Edited by: Kanna83 on Dec 13, 2011 6:04 PMHello,
If you know which workflow is sending the mail, then use e.g. PFTC_DIS to look at the workflow and figure out which task (TS....) contains the text. In some cases SAP lets you customise the text in the standard task, otherwise you could create a custom task and replace it (the standard task).
If you don't know which workflow it is, look in SWI1 at the time the mail was sent.
regards
Rick Bakker
hanabi technology -
Notification to the standard task.
Hi all,
i use the standard task '17900102' which create workitem .
i want to send some notification along with the workitem.
how to do in the standard task.Hi
Notification - Just information
Workitem- Executable.
if you wanna change workitem text .it can be changed via PFTC transaction right
regards
Muthu -
Event DRAW CHANGED for task TS90000016 not defined as start/end event
Hello,
i have created a workflow with one task, this task is of object type DRAW and the method is CHANGED. and i want to trigger this task when the status of a document changes to completed.
Now when i change the status of a document to completed, the workflow is starting but then throwing an exception. Here is what i am getting, any ideas as to why ?
Event DRAW CHANGED for task TS90000016 not defined as start/end event
Event linkage with errors deactivated
from the swel event trace i am getting the following:
the receiver <task> started correctly,
then i get the following:
Receiver FM SWW_WI_CREATE_VIA_EVENT_IBF
message: Event DRAW CHANGED for task TS90000016 not defined as start/end event
any ideas as to why this is happening and how i can fix it ?
regards to all the experts out there
points are awarded.Hi,
If you want the task to be executed without any agent intervention follow this:
In the transaction PFTC_DIS OR PFTC_CHG open your standard task and
see whether you have checked the ' background processing' option in
execution category.
It seems the "changed" method in Draw object is synchronous - so you
dont need any terminating events.
else
check for the bindings in workflow and make sure you dont make any
container with import parameter as mandatory.
Hope this will solve the problem.
Regards,
Manikandan R -
How to create a custom task in SRM for the standard task
Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.from PFTC itself. Same.
Maybe you are looking for
-
Plug in not updating even when downloaded
The Plugin Check is telling me that "Adobe Acrobat - Adobe PDF Plug-In For Firefox and Netscape 10.0.1" is outdated. I update it (closing Firefox before doing so). The Plugin Check still tells me it's outdated. Am I missing a step to update the plugi
-
Document Distribution with attached documents coming across in BIN format
Hello all, I have 3 dist types defined in the system. RML, RMA, and INT RMA sends to SAP Office and includes a link to the document defined in DMS and seems to work correctly. RML sends the document to SAP Office as an attachment but the attached do
-
Hi All, I used BI Publisher conversion utility to convert oracle report 6i to BI Publisher. In the following XML template file i got few quries. I need a hint how can i migrate this report to APEX. Thanks. Ribhi <?xml version="1.0" encoding="UTF-8" ?
-
How do I get a prompt for my new account when updating existing apps? I had used one of my sons account for most of the apps on my iPhone. I have since move up to a iPhone 4S and created my own account to use iCloud. But everytime I try to update t
-
WWDC 2007 - WEB 2.0 + AJAX, but no information on ADC or here
So, the announcement is that the iPhone can run apps developed with Web 2.0 + AJAX. It was up there at the top of Steve's list. But ADC has no results when I search for either AJAX or Web 2.0. Neither does this discussion. Who is hiding all of this i