Change start date of an object..

hello guru's,
i was wondering if the start date for objects like org unit or possition or job can be changed or we can only delimit or delete it...and if the start date can be changed then how can we do it...

Hi friend
You can change the start date of an object using program RHBEGDA0.
Award points if the answer was helpful.
Regards
Santhosh.S

Similar Messages

  • How to change start date in IT0088.

    Hi All,
    I am not able to change start date of IT0088(maternity).
    Record was maintained from 01.01.2014 to 31.12.9999. Now I need to change from 10.01.2014 to 31.12.9999.
    When try to change the record I am facing Changes across Tax year can only extended the validity period".
    Could you please advice me how to changes.
    Regards
    AB

    In which activity type you are trying to change the display name ?
    Have you checked the field property to verify that the field is locked by any other person ?
    Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

  • Can we change start date of Additional Actions(0302)Record

    Hi All,
    Can we change start date of Additional Actions(0302)Record.
    Please reply us as soon as possible.
    Regards,
    Chandra P

    Thanks Sikindar
    It helps us very much.

  • RAR 5.3 SP8 - Action Usage by User Report - Change Start Date?

    Hello,
    When we run the report "Action Usage by User" in RAR, it shows a default "Start Date" of 1/12/2009. RAR put this in there on its own. We never got the Action Usage Generation Job working correctly until a few weeks ago (we had some issues that SAP addressed and then it took time to get resources to go back and resolve some things on our side). Since we've only had the background job that pulls STAD data running successfuly since 10/3/2009 (it runs every 6 hours), we'd like to change the default "Start Date" on that Report Screen to be 10/3/2009. This way, users are not confused into thinking when they run the report and leave the date set as 1/12/2009, they are getting tcode usage data since that date. Because they're not getting tcode usage since that date. Our records really only go back to 10/3/2009.
    We could instruct our users to change the date every time but we feel it'd be easier if we just changed the date so they didn't have to worry about it.
    Does anyone know how we could tweak this? What table that default date would be under? How could we modify?
    Thanks!!
    Jes

    The table where that date is is VIRSA_CC_USAGECTL
    If you use the debugger tool, you'll see there's only 1 row in this table. You'll find the FROMDATE, TODATE, and FILENAME columns. I FILENAME column should be null.
    Row FROMDATE TODATE FILENAME
    1 2009-01-12 9999-12-31
    If possible, could you confirm you are seeing similiar information?
    The issue we are having is trying to figure out how to update this table...we need that FROMDATE to be 2009-10-03.
    Thanks!
    Jes

  • Change start date completion check CAT2

    Hi all
    Can someone tell me how I can change the start date for the completion check in CATS.
    When we do the completion check it checks also weeks of last year. We want to completion check from 1-1-2009 till now.
    Kind Regards,
    Richard

    Hello, see http://project-server-optimization.blogspot.co.uk/2008/04/change-project-start-date-once-its.html & http://project-server-optimization.blogspot.co.uk/2008/04/create-new-project-from-template.html. Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Call object was called with start date in the previous month

    We have a single cycle maintenance plan for 30 days.
    Shift Factor Late Compl.   : 100%
    Tolerance                    :  10%
    Shift Factor Early Compl. :  100%
    Tolerance                    :    10%
    Cycle modification factor:    1
    Factory calendar            :  NIL
    Call horizon                    : 100%
    Scheduling period          :  90 DAY
    Scheduling indicator       : Time
    Call no . 11 was a plan date of 14.08.2009 has completion date 14.08.2009. Schedule type/status has "scheduled complete".
    Call no. 12 was called on 13.09.2009 which is in the past.
    Can someone explain why the system called the order with a starting date in the previuos month , that is , 13.09.2009.
    And how to rectify it to make it current date for the next call object?
    Thanks,
    Manohar

    I checked the algorithm for call no. 12
    Start of Cycle                07.08.2008
    Last planned date         14.08.2009
    Compl.Predecess           14.08.2009        Absolute shift                +   0 Da
    Planned cycle/offset      +    30 Da          Relative shift            0 % =   0 Da
    Shift                                 +     0 Da           erance value           0 % =   0 Da
    Planned Dates Due   13.09.2009    Completed on
    Last call on              15.10.2009    Called by               IP1020091015
    Workorder generated has start date 13.09.2009.
    Should we restart this plan , as the start dates in call object are at least 1 month old ?
    Thanks,
    Manohar

  • Pa-30 edit  start date

    Dear SDN Team,
    In PA-30 txn , when i change  start date field (01.10.2010), system showing error message "Employee active since 01.06.2010'.
    Can you pls tell how can i change the start date?
    Rgds
    sp
    kolkata

    Hi,
    You cant change the start date in action(0000) and 0001 infotypes.. if u are in same action i.e Hiring .. system saves start date once u enter and saved the date for that specific action and it allows u to change the date because the employee became active from that date.. thats because it wont allow u to change the start date and also  it is because of time constraint 1 no gaps no over laps ..   that is the reason bedhind that error message.. since the employee is active in company it wont allow u to change the start date.... but  U can do the modifications for date changes in infotype 0041.. 
    hope this helpful to u
    all the best
    regards
    hima bindu

  • Blanket Agreement Start Date

    Hi Experts,
    Is there any way to change "Start Date" in blanket agreement? I know the field is grayed out but we need to change it.
    Thank you.

    Hi Toshi Kunisada,
    once the blanket agreement has been approved, several fields cannot be updated anymore, including the start & end dates. This is correct system behaviour since all data is editable as long as the BA is in status 'Draft'.  Approval locks the fields & safeguards against changes to the agreement after approval.
    If you need to change the dates, please go to the BA in question, right-click in the header area & select 'duplicate'. The data on the General & Details tabs will be retained. Enter the BP code & set the correct start & end dates. You will need to select the appropriate recurring transactions & attach relevant documents again. This data is not duplicated.
    All the best,
    Kerstin

  • Org Management - How can I change the start date of all the org units

    How can I change the start date of all the org unit objects and its relationships at one shot ?  I have created some 100 Org units with the wrong start date. Please suggest.
    Thanks in advance..
    Cheers
    Vijay

    Hello Archana,
    Thanks a lot... This has solved my issue...
    Cheers
    Vijay

  • Can we change data in string object.

    Can we change data in string object.

    Saw this hack to access the char[]'s in a String in another thread. Beware that the effects of doing this is possible errors, like incorrect hashCode etc.
    import java.lang.reflect.*;
    public class SharedString {
            public static Constructor stringWrap = null;
            public static String wrap(char[] value, int offset, int length) {
                    try {
                            if (stringWrap == null) {
                                    stringWrap = String.class.getDeclaredConstructor(new Class[] { Integer.TYPE, Integer.TYPE, char[].class });
                                    stringWrap.setAccessible(true);
                            return (String)stringWrap.newInstance(new Object[] { new Integer(offset), new Integer(length), value });
                    catch (java.lang.NoSuchMethodException e) {
                            System.err.println ("NoMethod exception caught: " + e);
                    catch (java.lang.IllegalAccessException e) {
                            System.err.println ("Access exception caught: " + e);
                    catch (java.lang.InstantiationException e) {
                            System.err.println ("Instantiation exception caught: " + e);
                    catch (java.lang.reflect.InvocationTargetException e) {
                            System.err.println ("Invocation exception caught: " + e);
                    return null;
            public static void main(String[] args) {
                    char[] chars = new char[] { 'l', 'e', 'v', 'i', '_', 'h' };
                    String test = SharedString.wrap(chars, 0, chars.length);
                    System.out.println("String test = " + test);
                    chars[0] = 'k';
                    chars[1] = 'a';
                    chars[2] = 'l';
                    chars[3] = 'l';
                    chars[4] = 'a';
                    chars[5] = 'n';
                    System.out.println("String test = " + test);
    } Gil

  • Change in start date of tax depreciation not for posting in mid of year

    Hi Experts,
    Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
    Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
    The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
    Need your assistance to know is it feasible to do this.
    Thanks and Regards,
    Harshad

    Hi Harshad
    The behaviour of the system is very much correct, it is designed to behave that way...
    One, you should not have changed the dep start date....
    two, NBV in SAP is always taken to be NBV @ the start of the year....
    The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
    a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
    b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
    c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
    Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
    a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
    b. Post a write up from ABZU....
    No need to do Asset to asset transfer in my opinion
    Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
    br, Ajay M

  • Change in start date of tax depreciation in mid of year

    Hi Experts,
    Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
    Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
    The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
    Need your assistance to know is it feasible to do this.
    Thanks and Regards,
    Harshad

    Hi Harshad
    The behaviour of the system is very much correct, it is designed to behave that way...
    One, you should not have changed the dep start date....
    two, NBV in SAP is always taken to be NBV @ the start of the year....
    The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
    a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
    b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
    c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
    Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
    a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
    b. Post a write up from ABZU....
    No need to do Asset to asset transfer in my opinion
    Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
    br, Ajay M

  • After Changing the start date for a task in a project we are not able to save

    Hi 
    When we are updating the task start date of a particular task the below message is poping up in Project Professional and when we trying to update in Pwa and saving it automatically the save is becoming undone. 
    We are logging in with that user credentials and checking where the user has not charged any actuals on that task.
    Then a message pops up saying:
    "The actual work in "xxxx" is out of sync with the actual work updated from timesheets. Actual work can only be updated by team members through PWA. Changes you have made to users' actual work will be lost during the save."
    Can any body throw some light on the above issue.
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    It seems you have enabled the option in server setting >> task Settings and Display >> Protect User Updates>> for restricting updates to PWA only ? this is one cause when this error message appears when the update restriction is to PWA
    and PM tries to modify the Plan, the only exception to this is milestones which can be updated via Proj pro,
    this being the case becomes a conflict when you say updates can be done only via PWA and try to overwrite the actual via MSP 
    kirtesh

  • How to track changes in Start date

    Hello Everyone,
    Currently I am facing a new issue (requirement from management) that they want to track the activity start date change and generate a trend report on that so we cna display it to client that this many activities changed this times.
    To give you the overview, currently we are working on Asset Renewal project where there is no fix scope it comes as per priority. And unfortunately priorities get changed as well.
    So as an example originally we may have planned a particular activity on 04/08/14 acording to priority and then we get the new date and plan it again for 20/07/14 then we get our possession request knocked back and replan it to 20/08/14 then we encounter a problem from supplier and we replan it to 25/08/14. So this is just a scenario I have given but it changes say atleast 10 time before it gets executed.
    So I know traditional way in primavera to capture the change is maintain baselines but that would not be applicable in my case as I have hundreds of sites in 1 program and they change as i explained above so is there any way I can track that changes in primavera or any other way available. i am really open for all suggestion including new softwares or exporting to Microsoft Excel.
    I have tried my best to explain this situation but if you require any further info please let me know.
    Thanks in advance
    Nirav

    Pl take a look at the Std Report RPUAUD00 used for Infotype Logging. The Report Documnentation details the steps needed to turn the logging for the PA infotypes, which in your case could be 0167,0168,0169 etc..
    ~Suresh

  • Changing the Data source in Business Objects XI

    Hi,
      Is it possible to change the data source(not universe) in runtime to generate business objects reports. I am using BOXI 3.1.
    Below is the code I am using to change the universe in runtime. I would like to change this so that i can change the data source instead of changing the universe. My intention is to generate report from multipple database using same universe. Right now I am using multipple universes connected to multiple datasources to achieve this. I am using Report Engine SDK(Java).
               if("Webi".equals(mDocKind))
                   // Added for multiple database support
                   DataProviders dataProvs = documentInstance.getDataProviders();
                try{
                    //To support multiple queries in BO reports
                 for(int count=0;count<dataProvs.getCount(); count++){
                   DataProvider dp=dataProvs.getItem(count);
                   DataSource ds= dp.getDataSource();
                   infoUniverseObjects = getUniverseObject(infoStore,NewUniverseName);
                   infoUniverseObject = (IInfoObject)infoUniverseObjects.get(0);
                   String newDsCuid = infoUniverseObject.getCUID();
                   dataProvs.changeDataSource(ds.getID(), "UnivCUID=" + newDsCuid, true);
                   if(dataProvs.mustFillChangeDataSourceMapping())
                        // Re-map data source to target Universe objects
                        ChangeDataSourceMapping mapping = dataProvs.getChangeDataSourceMapping();
                        ChangeDataSourceObjectMapping[] maps = mapping.getAllMappings();
                        dataProvs.setChangeDataSourceMapping();
                    }//for dataProvs.getCount()
                }catch(Exception e)
                      mLogger.info("BOReportObject","createReport","Inside multiple data providers loop"+e.getMessage());
    Thanks in advance
    Shameer
    Edited by: Shameertaj on May 20, 2009 3:08 AM

    Hi Shameer,
    I think this is only possible with the Universe Designer SDK (which is only available in COM).
    Please kindly refer to the API reference for the Universe Designer SDK for more details:
    http://help.sap.com/businessobject/product_guides/boexir31/en/bodessdk.chm
    Also, please note that changing the universe connection when viewing a document on-demand is not recommended because this could lead to possible issues.
    For example:
    Two users trying to view documents that uses the same universe at approximately the same time.
    But user A wants to use connection X and user B wants to use connection Y.
    This could lead to an error while openning the document or while refreshing/retrieving the the data.
    Hope this helps.
    Regards,
    Dan

Maybe you are looking for