Change Start Image in /SAPSLL/MENU_LEGAL

Hi GTS experts.
My client would like to change the default image in the /SAPSSL/MENU_LEGAL start transaction.
From SMW0, I have found that the SAP default image is stored in the /SAPSLL/CORE_LEGAL package under the object name /SAPSLL/START_IMAGE.
However, I cannot find the table name in which this value is maintained (like the SSM_CUST table). Aside from overwriting the /SAPSSL/START_IMAGE object with the image my customer desires, I'd prefer to change the value in the correct table maintenance view.
Has anyone done this before? I'd really apprecaite the help.
Cheers,
Tim

HI,
Only you upload the image file to the object /SAPSLL/MENU_LEGAL.
I think there is no special table for maintenance (like the SSM_CUST table).
hiro

Similar Messages

How to change the maximum frame rate of the camera by changing the image size?

I have two acA2040-180km cameras which are connected to 2 NI PCIe-1433 framegrabbers, I am monitoring my cameras by LabView, maximum allowable frame rate is about 187 for full resolution images, but I just need a small fraction of the images, I know if I make the images smaller, FPS will get higher, but it isn't possible by changing the image size in NI MAX, I've also tried to change the size by defining the region of interest in the grab setup.vi, but it would be after going to camera so it isn't the case as well, so I need a VI to go to the camera before starting to take photo and define the region of interest which is going to be captured, would you please help me to find it?
Please help me, this problem get me stuck!!!

Have you tried changing the image size using property nodes as Bruce suggested? Do remember with Basler cameras, reducing the width only will not affect the transfer speed but the reducing the height will. Have a look at the frame calculator to understand what you frame rates you can acheive with certain settings:
Basler Frame Rate Calculator
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How do I change the image selected for the finalized movies pane in all events?

How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

How to randomly change an image upon refresh?

Hello, I just started my website and i was wondering if it is possible to randomly change an image upon reloading the page? I can't really find the answer anywhere and the widget confuses me.. anyone knows the answer to this one?

it can be done with javascript and cookie.
q: how are you with javascript?
http://www.cyclosaurus.com/iWeb2/Welcome.html
background will change when you refresh the page.

How do you change the image in a JPanel?

Hey! (firstly, i need to use image on a JPanel, label&icon not an option).
I've made my JPanel class
    public class DrawingPanel extends JPanel {
        Image img;
        DrawingPanel() {
            Image img = Toolkit.getDefaultToolkit().getImage("13.jpg"); //default image at startup
        public void paintComponent (Graphics g) {
            super.paintComponent (g);
            // Use the image width & height to find the starting point
            int imgX = getSize ().width/2 - img.getWidth (this);
            int imgY = getSize ().height/2 - img.getHeight (this);
            //Draw image centered in the middle of the panel
            g.drawImage (img, 0, 0, this);
        } // paintComponent
    } // DrawingPanelAnd I've made my instance of it and added it to the Frame:
    DrawingPanel imagePanel = new DrawingPanel();Now, I need to change the image on the JPanel according to the user's input. I have the string of the location of the new image. How do I update the JPanel to display this new image? Any help greatly appreciated!!

Well... You could just add a method in your class which sets the image according to the new image name you provided. Something like this:
    public class DrawingPanel extends JPanel {
        Image img;
        DrawingPanel() {
            img = Toolkit.getDefaultToolkit().getImage("13.jpg"); //default image at startup
        public void setImage(String imageName) {
                img = Toolkit.getDefaultToolkit().getImage(imageName); //Loading the desired image
        public void paintComponent (Graphics g) {
            super.paintComponent (g);
            // Use the image width & height to find the starting point
            int imgX = getSize ().width/2 - img.getWidth (this);
            int imgY = getSize ().height/2 - img.getHeight (this);
            //Draw image centered in the middle of the panel
            g.drawImage (img, 0, 0, this);
        } // paintComponent
    } // DrawingPanel

Problem changing tabstrip images

Hi,
I've created a theme for my portal but when I tried to change Tabstrip (Complex Elements category) images, I could only change some images but not all.
Ok images:
Starter Image of Selected Tab: tab_first_ang_on_prev_off.gif
Starter Image of Unselected Tab: tab_first_ang_off_prev_off.gif
End Image of Unselected Tab: tab_last_off_next_off.gif
End Image of Selected Tab: tab_last_on_next_off.gif
Transition Image From Unselected to Unselected Tab: tab_ang_off_off.gif
Transition Image From Unselected to Selected Tab: tab_ang_off_on.gif
Transition Image From Selected to Unselected Tab: tab_ang_on_off.gif
"Unmodifiable" images:
tab_first_ang_off_prev_on.gif
tab_last_off_next_on.gif
tab_last_on_next_on.gif
I can't modify this images directly from Theme Editor. I've tried to modify it directly in the server but it didn't work. Can anybody help me?
Thanks in advance,
Joan

Hi Joan,
You can try to export your theme, then replace needed images in the received archive and import theme back to the Portal.
Regards,
Andrei

How Do I Change The Image Used For The Power Up Screen?

Windows 8.1 Pro with all patches.
How do I change the image that is shown when you power up a PC?
Note: This is not the Start Screen background or the Lock Screen background or the Desk Top background.
http://www.saberman.com

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

Changing the Image quality

I trying to change the image quality. Iam using the following program.
import java.awt.image.BufferedImage;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import java.util.List;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageWriteParam;
import javax.imageio.ImageWriter;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.stream.ImageOutputStream;
public class QualityTest {
     public static void main(String[] args) throws IOException
          {     Timer t=new Timer();
               t.start();
               BufferedImage image = ImageIO.read(new File(args[0]));
               Iterator writers = ImageIO.getImageWritersBySuffix("jpeg");
               if (!writers.hasNext()) throw new IllegalStateException("No writers for jpeg?!");
               ImageWriter writer = (ImageWriter) writers.next();
               ImageWriteParam imageWriteParam = writer.getDefaultWriteParam();
               imageWriteParam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
               List thumbNails = null;
               IIOImage iioImage = new IIOImage(image, thumbNails, (IIOMetadata) null);
               write(writer, imageWriteParam, iioImage, "high_quality.jpeg", 0.75f);
               write(writer, imageWriteParam, iioImage, "low_quality.jpeg", 0.0f);
               write(writer, imageWriteParam, iioImage, "mid_quality.jpeg", 0.5f);
               t.stop();
               t.print("Writing Time");
               public static void write(ImageWriter writer, ImageWriteParam imageWriteParam, IIOImage iioImage, String filename, float compressionQuality) throws IOException
                    ImageOutputStream out = ImageIO.createImageOutputStream(new File(filename));
                    imageWriteParam.setCompressionQuality(compressionQuality);
                    writer.setOutput(out);
                    writer.write((IIOMetadata) null, iioImage, imageWriteParam);
                    out.flush(); out.close();
the size of the image after writing it on to the disk is huge. Iam not able to understand the reason. When u r compressing at lower qualities the size should reduce. Can any one help me

the size of the image after writing it on to the disk
is huge. Iam not able to understand the reason. When u
r compressing at lower qualities the size should
reduce. Can any one help meI assume you are referring to the size of the jpeg files created. I tried running it on an image from James Gosling's home page:
http://java.sun.com/people/jag/JamesBarbGeoff.html
The original is 63K. The code here creates files of sizes 9K, 37K and 65K -- all reasonably sized... Where is the problem?

Problem in changing branding image.

Hi all,
I have a problem in changing the branding image for portal logon page.
To my knowledge I have the change the image file under
\usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.portal.runtime.logon\layout
But to my surprise I am not able to see gthe com.sap.portal.runtime.logon folder in the server.
Can somebody suugest me what might be the reason.Is it any problem with the versions or something?
Thank You,
Regards,
Rajesh

It is:
\usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout\
You can do a simple search for branding-image.jpg from \usr\sap\EPD\JC0\j2ee\cluster\server0 to find the location. You can change the location or name in the config tool.
Regards,
Slava

How do I change an image border color to another color - Dreamweaver CS5?

Good day,
I have just learned how to add a border to an image with Dreamweaver CS5 within the Properties Inspector.
After typing the width in pixels in the Border Text Field and pressing the Enter key, Dreamweaver created a black border.
How do I change the image border color to another color?

I added your suggested rule to the Style Sheet "in any order" as you explained. See the image below.
However this did not change the image border from black to light blue. In fact, nothing changed.
Nothing changed because the CSS that has been written into DW is incorrectly written.
You want the following (exactly as written below)
img {border: 4px solid #0062C8;}
You've inadvertently wrapped the rule inside a #main_image container rendering it meaningless.
It's easiest to go into Code View and change
#main_image {
img {border: 4px solid #0062C8;
to
img { border: 4px solid #0062C8; }
The Property Inspector added a border exactly as I wanted it, other than the color I wanted the border to be. What is the use of this function in Property Inspector if it can add a border within Property Inspector but not let me change the COLOR of the black border that Property Inspector added, to another color?
That's a deceptively simple, yet valid, question with a long answer.
Back in the dark old days of web design web designers were restricted to inline HTML formatting which offered border properties but no colors.
CSS styling offers colors and more but has to be written differently.
These days. it's best to avoid HTML formatting. Unfortunately border="4px" in the PI still allows it. But does not permit color.
Does anyone else out there ever add color borders to their IMAGES (not the containing box for the image) ?
Yes, using CSS.

How can I change an image to look like a watercolor painting?

I'm using FW CS6 and need to change an image (.bmp, .jpeg, .jpg or .fw) to look like a watercolor painting. All help is appreciated.
-Jack Ripley

Maybe you had installed an action into your previous version of photoshop elements?
Anyway here's an action that will work in pse 11, although the look is a little different.
http://photoshop-action.no/specialfx.htm
Also, some from panos fx
http://www.panosfx.com/commercial-free-photoshop-actions/film-machine

Is there a way to change the image numbers in a file in Aperture?

Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
You can create custom names with appended numbers, when you export your image files to be saved on a disk.
Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
Regards
Léonie

How do I change the image resolution of a photo?

Hi..,
     I am the beginner in Photoshop.
     I want to change one image resolution from 72 dpi to 300 dpi.
     So, I search and got one pdf for change the resolution of the image. In that they mention, take the "Printscreen" of the image and paste in the photoshop and change the mode(Index - flatten) and change resolution via the "Image -> image size -> Resolution".
     Like that i did, it changed correctly.
     After that I Open one already saved image file in Photoshop and do that same steps but the resolution was not changed.
So, now how to change that saved image resolution to 300 dpi...??
Regards.,
VISWA

Viswa,
To find the current resolution of your image, follow these steps:
With your image open in Photoshop, Image > Image Size (Like you've already done earlier).
Check the resolution as shown above. If it doesn't show 300, enter 300, hit OK and 'Save' your image.
Open the file and check again. If it still shows 72, post back with more details of the type of file you're trying to open in Photoshop and if possible, a screenshot so we can help.
-ST

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

Question about changing ID3 images

Hey everyone. I recently changed my podcast artwork. I use Powerpress, so changing the MAIN artwork was quite easy. So for this question, I am referencing only the individual art that is displayed with each individual episode.
I know that for iTunes to recognize a change in episode artwork, that it cannot have the same name as the previous. The new artwork embedded does have a new name but is it the artwork that needs a different name, or the entire mp3 that needs a new name? Once artwork becomes embedded as ID3 I'm not sure if it loses its name altogether. So I need to know specifically what needs a new name for iTunes to update my episode art? Pic name or mp3 name?
Thanks for your time!

Thanks for the response Roger.
So just to be clear, I have changed the images embedded in my MP3s. I then re-uploaded them to Libsyn using the replace function. So I now have MP3s with the exact same name as before, but with a new image embedded. Are you saying iTunes will see the image change in each episode even though the name of my MP3 is exactly the same?
So far, iTunes has immediately updated my main podcast image but all my individual episodes still have the old image.
You can probably see what I'm talking about by searching iTunes for Netflix Junkies. You'll see that 'episodes' has different artwork than 'podcasts' in the search results. Do I just need to wait it out? Or rename my mp3s?
Keep in mind, there is another podcast with the same name no artwork. This is not my podcast but someone else's.
Thanks again!

Change Start Image in /SAPSLL/MENU_LEGAL

Similar Messages

Maybe you are looking for