Change starting number for Numbered List.

I am breaking up a list into 4 columns and I want them numbered.  When you use the Numbered List it automatically starts at 1.  I want it to start with the number I left off with in the text box next to it.  How do you change the starting number for a Numbered List?

Ok, this is how you do it (just figured it out myself!)
If you click in the text box and do command A to select all, it will select all of the text BUT not the numbers. If you want to change the size of the numbers, you have to click on the number in the text box (the entire line will highlight) and use command-+ and command-minus to increase/decrease the size (or choose from the character palette. This WILL change the size of everything in the text box, but then you can go back to a simple command-a to change the text to the size you want.

Similar Messages

  • How do I change my number for iMessage and facetime

    How do I change my number for iMessage and FaceTime on my iPad mini

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • Robohelp 10 output line spacing for numbered lists is off

    I wondered if you have had this situation occur with your output from Robohelp 10.
    I created my help system and CSS using Robohelp 10. My CSS contains a numbered list style and an alpha list style, both having line spacing of 3pt before and 3pt after. Looks great in Robohelp WYSIWYG, but the generated output (in IE and Chrome) looks bad. The numbered list line has way too much line spacing after (the next style is a non-numbered list style) and the alpha list has way too little line spacing.
    I tried playing around with changing the line spacing but it does not change the output!
    Thought I'd reach out to see if you have experienced this issue and the most expedient way to resolve.
    Here is an example of HTML tags in Robohelp:
    numbered list
    <?rh-list_start level="1" an="1" class="rl-p-1ListNumber" start="1" style="list-style: rh-list;
      list-style: rh-list;" ?><p class="1ListNumber">instruction text.</p><?rh-list_end ?>
    alpha list
    <?rh-list_start level="1" an="1" class="rl-p-Alpha" style="list-style: rh-list;
      list-style: rh-list;" ?><p class="Alpha">Instruction text.</p><?rh-list_end ?>
    thanks much

    If you create a single topic project showing this problem and send it to me as directed on the Contact page of my site, I will take a look.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How can I change phone number in Contact List in IOS 7?

    After upgrading to IOS 7, I cannot change the front IDD number.
    Whenever I tried to ''backspace"/"X" the number, it duplicates and keep on duplicate the new number I typed.
    For Example hte original number is: 1666-0044-123456
    and I want to change to 0060-0044-123456
    then I 'blackspace" numbers before "1666", and type "0060'", then it duplicates to " 00600060"
    everytime it duplicates numbers i typed.
    When I tried to delete the whole number, the phone stopped working.
    How can I do?

    The iPad uses the user's email address, not a phone number, for iMessage. Go here on the iPad:
    Settings -> Messages
    and change the Send and Receive setting to her email address rather than yours.
    Regards.

  • External number for Task list group

    Dear experts,
    I want to give external number(actually name) to all the groups for equipment task lists.In SPRO , number ranges for task lists, I have created one external along with internal number range. But as soon as I want to create the equipment task list, the " group" picked its value from internal range.
    Is there any setting to do , so that I can get external number for the group for equip. task list.
    Regards,
    Rajesh

    Hello Rajesh,
    It is not possible to have external numbering for equipment or functional location task lists. Only possible for general task lists.
    -Paul

  • How to change phone number for a facetime contact

    ; the number i used to call (mobile) isn't chosen and i can't dial it in facetime
    I used to click facetime and choose my friend's mobile phone number. Now it just dials a number it found in the contact's list, even though i changed it.

    Well, the only way I found is to reset iCloud Keychain entirely. Go to System Preferences->iCloud->Keychain, put in your password to your Apple ID, and click "Forgot code?" on the next screen. You'll be prompted to reset Keychain entirely, which you will have to do in order to change your number, unless you have AppleCare, in which case you can call them and have them set it up for you.

  • How do you change phone number for iMessage on ipad

    My iPad is showing our apple Id with my husbands phone number after I edit our apple Id to show my phone number. I need to change it to my number for I messaging can anyone help??

    You may need to sign out of messages on all devices - including the phones and start over again. This kb article explains how to do it. Make sure you go all the way down the very end of the article - read it completely.
    http://support.apple.com/kb/HT5538

  • Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

    Hi,
    I added a list view web part into a SharePoint 2013 page and it  is working as expected, except for one thing.
    I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
    Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
    Thanks in advance for the help.
    Regards,
    P.

    Hi,
    Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
    If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
    In addition, here is a thread with similar requirement that might help:
    http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Change FAX number for all vendors and customers in a massive way.

    Hello,
    I need to change the FAX number for all the vendors and custormers in Q01 so that every form should output through an specific test fax-printer. The problem is that I don't know which field I should change and how can i do it in a massive way. I have heard something about catts but i don't know almost anything.
    Could you help me?
    Thanks in advance.
    Luis Álvarez.

    Hi Luis,
    Use tcode XK99 for vendor mass change, select the Fax no field. You have to take note that this changes will be only 1 fax number for all vendors.
    Else you have to use BAPI for mass change.
    regards,
    maia

  • Upload using eCATT to change fax number for all existing Vendors

    Dear All,
    Using eCATT upload, i need to change the Fax number format for all existing vendors. How to do this?
    I havent used eCATT before, please guide me in this regard
    Thanks
    RS
    Edited by: Ramapuram Saravanan on Feb 8, 2009 6:13 AM

    Hi Luis,
    Use tcode XK99 for vendor mass change, select the Fax no field. You have to take note that this changes will be only 1 fax number for all vendors.
    Else you have to use BAPI for mass change.
    regards,
    maia

  • Changing Liability number for Suppliers in AP

    Dear All,
    we have oracle application 11i and we have enter data for the suppliers but we change the accounts in the GL, i need to change the Liability number for the suppliers in the AP tables can any one told me which tables must updated.

    Hi,
    Try using BAPI_BATCH_CHANGE for your requirement.
    Refer:
    http://abap.wikiprog.com/wiki/BAPI_BATCH_CHANGE
    BAPI_BATCH_CHANGE to update data on classification tab

  • Change iPhone number for outgoing calls from mac (Yosemite)

    I have two iPhones, and one of the iPhone is set for iPhone cellular calls (handoff) in macbook under FaceTime preference. How to change this number so that I can make outgoing calls from different iPhone?

    Hi,
    If you Erased the Drive  and set up the computer anew it will depend on how you migrated/imported your Mac User Account (if you even did).
    Mostly the process will make the Mac seen as a "New" computer.
    In some cases this will means settings that involve some sort of "pairing" will not work.
    You may also get to the point of having 5 "devices" linked to iTunes because of this.
    I have  G4 that is coming up on 121 years old.
    It has 4 drive bays and some of the drives are partitioned.
    It will boot into OS 9 and every version of OS X up to and including Leopard (OS X 10.5)
    I have tended to Clone the current set up and then Update the main Drive.
    It does mean though that iTunes counts them all individually.
    On top of that I have a Snow Leopard MacBook Pro and my current Yosemite booted iMac (It also has Older OSes on External Drives)
    The outcome is that you might have to re-link the two devices.
    9:38 pm      Friday; January 2, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Change start page for project?

    I'm using RH8 and trying to update the start page for an existing project. I opened the properties and here's a pic:
    you'll see the field for Default topic is greyed out. but what's interesting is that the topic named in the field is not the opening topic for the project. So, what I'm asking is: why is the default topic a different topic than what is the opening topic of the project? second, how can I change it since it's greyed out?

    Hi there
    You may think we can see that it says:
    CalloutGuide\ABB_Docs\s6010001_Executive_(EXC)_SDD_122104_files\Introd uction\Purpose.htm
    But in fact all it shows us is this:
    CalloutGuide\ABB_Docs\s6010001_Executive_(EXC)_SD
    So we will have to take your word for it that this is what it says.
    What happens if you simply create a totally new topic that says something like this:
    HERE IS MY NEW START PAGE
    Then ensure it exists at the project root. Configure it to be the new start page. Do you notice it changes then?
    Personally I see some issues with what you have. The path seems incredibly long. That can cause issues. And I see a space in what you have posted. The word "Introduction" is appearing as "Introd uction". Not sure if that has anything to do with it or if it's just a typo on your part when entering the post.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • 10g express, how to change port number for the database home page

    10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
    Regards
    jl

    Andy, thank you very much, I have been able to changed the port number following your advice.
    I hope you do not mind I ask a further questions along this line:
    I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
    On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
    Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
    Thanks
    jl

  • How to change phone number for key chain verification

    I've entered a wrong mobile phone number for receiving the key chain verification code.
    How can I change this phone number?

    Well, the only way I found is to reset iCloud Keychain entirely. Go to System Preferences->iCloud->Keychain, put in your password to your Apple ID, and click "Forgot code?" on the next screen. You'll be prompted to reset Keychain entirely, which you will have to do in order to change your number, unless you have AppleCare, in which case you can call them and have them set it up for you.

Maybe you are looking for