Change status from active to inactive
Hi Experts,
How can I change status from active to inactive for the InfoCube?
Thank you
You can deactivate a cube by deactivating one of the infoobject in it:
select one of the char in the cube
menu option Extras/Unlock infoobjects
The system will offer you to delete the cube content.
If you agreed, the cube becomes inactive.
Please assign if helpful
Similar Messages
-
Cannot Change Item Status from Active to Inactive
Dear All
Cannot Change Item Status from Active to Inactive on Item master screen. can any one provide the steps.
Best Regards
ArifuddinCheck on below link under "Defining Item Status Codes"
http://docs.oracle.com/cd/E18727_01/doc.121/e13450/T291651T291798.htm#I_t_ditstatus
thanks -
Since the last OS X update 10.10.3, my apps flash from active to inactive and back again. It happens with all of my open applications, and it keeps me from typing accurately because the app, flashes to inactive while I am trying to type.
When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Change status(Active/Inactive) of file adapter by the external command
Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin -
How to change the IDOC Status from 30 to 03
Hi Friends,
In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
I am getting the IDOCs of Status 30.
then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
to change the IDOC status from 30 to 03.
SUBMIT rseout00 USING SELECTION-SCREEN '1000'
WITH docnum IN gt_range_idocs
WITH p_compl EQ 'Y'
AND RETURN.
but still i am not getting the IDOCs of changed status.
I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
Kindly Guide me how to proceed furthur
Thanks in Advance,
GaneshThanks Shrishit,
RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
means is the functionality of this Program is same as the RSEOUT00.
MY job is to change Status from 30 to 03 only
and then Check the Status of those IDOCs, and if the IDOC is not sended to XI i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
Kindly waiting for your reply,
Thanks in Advance,
Ganesh -
Why am I having less free memory? What is active and inactive memory?
Hi, I own a MBP penryn model. Right now, when I look in the activity monitor (or istat pro), it tells me that my free ram is 302mb, 56mb inactive, 816mb active, and 166mb wired. Why am I only having 300mb free if Im only using safari at the moment and not running anything else? Everytime I start up my notebook, the free space is around 1.70gb free at least. But why do I have that little bit of free space after a long time use?
Sorry if this is a newbie question, im really new to this.
Message was edited by: djvic87About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM. -
Changing User Status by activity confirmation
Hi Experts,
In my project , User status is maintained for WBS.
My client want to Change the User Status of all the WBS when one activity is confirmed .
lets get an example: In project there are WBS A, B and C. In WBS A there are Activity number 1 and 2.
The WBS has user status Z and X. When Activity 1 is confirmed , all the user status of WBS will be Z.
When the acvity 2 is confirmed , all the user status of WBS will be X.
Please help how to do this. is there any enhancement or BAPI.
BR,
Morshed AlamYou have to do development for this. Use BADI "Workbreakdown Update" to change the user status on WBS, whcih can be called during WBS save. The development needs to pick the correct user status from Activities. Status are stored in table JEST.
Hope this helps.
Sarang -
Is it possible to change the status from Bid Rejected to Bid submitted?
Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M -
Changing OSM task state/status from another parallel task flow
Hi, guys!
I have a problem with implementing parallel task flow. Let's consider such situation: there are two parallel task flows, the first flow contain manual task, upon completion which I need to change second flow's task state/status and vice-versa. I studied XMLAPI functions, wsapi operations, api from automation package but couldn't find appropriate aproach.
Thanks!
Edited by: serj129 on 15.08.2011 2:50Have you any suggestions?
I tried to implement 2 automation task, which contain automation plugins. First task implemented xquery sender as completed event, the second task implemented xquery reciever, which changes status to success, but this approach isn't working.
All properties of automation plugins configured properly, but I always receive next exceptions:
####<Aug 22, 2011 4:39:52 PM ALMT> <Warning> <EJB> <car07-eth0.telecom> <AdminServer> <ExecuteThread: '13' for queue: 'oms.automation'> <oms-automation> <> <> <1314009592567> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
java.lang.RuntimeException: No transaction associated with request.
java.lang.RuntimeException: No transaction associated with request
at oracle.communications.ordermanagement.cluster.message.ClusterMessageHandlerBean.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
####<Aug 22, 2011 4:39:52 PM ALMT> <Warning> <EJB> <car07-eth0.telecom> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1314009592571> <BEA-010216> <The Message-Driven EJB: BiTTLautomation.BiTTLautomation.OSMManualListenerMDB is throwing exception when processing the messages. Delivery failed after 185 attempts. The EJB container will suspend the message delivery for 60 seconds before retry.>
####<Aug 22, 2011 4:40:09 PM ALMT> <Info> <oms> <car07-eth0.telecom> <AdminServer> <Timer-8> <admin> <> <> <1314009609038> <BEA-000000> <impl.OrchestrationCascadingLRUPolicy: Evicted order /order/474 from orchestration cache due to cache entry expiry>
####<Aug 22, 2011 4:40:24 PM ALMT> <Info> <oms> <car07-eth0.telecom> <AdminServer> <ExecuteThread: '13' for queue: 'oms.automation'> <oms-automation> <BEA1-08945C597092560E5D6A> <> <1314009624879> <BEA-000000> <plugin.AbstractAutomator: Creating automation plugin [class oracle.communications.ordermanagement.automation.plugin.XQuerySender_iults7_Impl] built using SDK version [7.0.2.437]>
I suggest that it is not correct approach, because of automation context restored from DB is related to other task.
Have any ideas of changing task status from OSM DB directly. This approach is temporary, for compatibility with performing manual tasks in 2 systems: OSM and other
Thanks!
Edited by: serj129 on 22.08.2011 3:59
Edited by: serj129 on 22.08.2011 3:59 -
I want Queue status weather it is Active or inactive
HI,
please any one let me know information about the Issue
i want Queue status weather it is Active or inactive
from which file weblogic server will get information
Reply me as early as Possible
Regards,
SrinivasU can use the follwoing JMX Code
http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/ -
User status shows active in portal for inactive LDAP users
Hi all,
Users listed in the LDAP as deleted or inactive are still listed in EP
User Management as valid active users.
1) is there any process or OSS note which can help us to get users
inactive in portal user management to the corresponding LDAP inactive
users?
2) is there any chance that any inactive or deleted entries in LDAP
should not be searchable from User admin Portal search?
Any solution for the above problem?
Please reply.
Regards,
haroonHello there,
i have the same problem: We have several domains that sometimes contain users with the same user-id. This happens, if a user is "moved" from one domain to another: A new user with the same user-id is created in the new domain and the user-status of the user in the old domain is set to "inactive".
But SAP NetWeaver Portal (7.0 EHP 1) ignores this user-status flag and thus login (with SPNego / Integrated Windows Authentication, which does not send the domain of an identified user to the portal) fails.
Is there a possibility to get the portal to "ignore" LDAP users (meaning no longer list them in the UME) that have their user-status flag set to "inactive"?
Thanks for a reply in advance!
Regards,
René -
Selecting Active and Inactive Employees from IT0000
Hi,
How do I select Employees from InfoType 0000 based on Employment Status field. I need an optimised way to select the same as the field P0000-STAT2 is not indexed
Select directly from PA0000 based on STAT2 field would be my last resort
Thanks and Regards,
AdityaHi Frank,
If I use the logical database PNP or PNCPE, it would also bring in the selection screen which I do not want.
I am writing an upload program which will read all Active and Inactive employees and then update InfoType 0758 for them
I could use function module LDB_PROCESS to avoid the selection screen in the logical database
However, Is there any other approach that you know through some function module....??
Thanks and Regards,
Aditya -
Dynamic File Adapter status - Active or Inactive
Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
FaheemHi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem -
How to change the user status from CJ01 transaction
Hello All,
I am doing a BDC in CJ01 transaction where there is a field called "User Status" .
This field is not editable. However the requirement is to populate this field with some value based on some other entries.
Is there any Function module / BAPI to update user status from CJ01.
Thanks in advance.
Regards
IndrajitHi Anbu
Thanks for your kindness.
I had got the proper badi definition ( RECN_CONTRACT ) before. I have try to implement the badi in my implementation YCL_IM_RECN_CONTRACT and below is my example codes. It can update the user status when the SAVE button is pressed. My example codes are below:
METHOD if_ex_recn_contract~check_all.
DATA:
cl_recn_contract TYPE REF TO cl_recn_contract.
DATA: r_status_mngr TYPE REF TO if_reca_status_mngr.
DATA: lv_status_profile TYPE j_stsma.
DATA: lt_status TYPE re_t_status,
ls_status TYPE LINE OF re_t_status.
DATA: r_message TYPE REF TO if_reca_message_list.
cl_recn_contract ?= io_object.
CHECK if_before_store = 'X'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->get_current_status
IMPORTING
ed_status_scheme = lv_status_profile
et_status = lt_status.
lv_status_profile = 'ZBCIA01'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status_profile
EXPORTING
id_status_profile = lv_status_profile.
READ TABLE lt_status INTO ls_status INDEX 2.
ls_status-stat = 'E0001'.
ls_status-inact = ''.
MODIFY lt_status FROM ls_status INDEX 2.
CALL METHOD cf_reca_message_list=>create
RECEIVING
ro_instance = r_message.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status
EXPORTING
it_status = lt_status
if_only_user_status = 'X'
io_msglist = r_message.
REFRESH lt_status.
ENDMETHOD. -
Service Request disappears from the list of My Service Requests after changing status to In process
Service Request disappears from the list of My Service Requests after changing status to In process
Incident manager (resp.) > Agent DashboardHi,
As far as I know, this is a new feedback, Please vote this customer voice, here is the link:
http://feedback.azure.com/forums/216926-service-bus/suggestions/6062851-batching-in-rest-api, or create a new voice at azure feedback forum:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
My MacBook Pro is stuck on grey loading screen with apple logo and spinning wheel.
PLEASE HELP - Tried to start up my MacBook Pro and I get grey screen w/ apple logo & spinning wheel. It's stuck on this screen. Safe mode didn't help but reveled this: smc read key action error, BOOS key failed, BOPS key failed. Consider rebuild of p
-
hello, I run windows 7 home premium edition x64 on my machine HP Pavilion dv6-6b20ee ... when I try to install Apple 's iTunes this error always popup and refuse to complete the installation... I had several times to contact crosoft Team and Apple Te
-
Hi, here is one error with: and error is: on Win7. Happen during the time of streaming. Here is some more information after click on Retry: Problem signature: Problem Event Name: APPCRASH Application Name: FlashMediaLiveEncoder.exe Applic
-
Best way to recreate iPhone album in iPhoto?
My wife's 4S (running IOS6) has about 500 photos in the camera roll. These have over time been synced to iPhoto but she kept them on her phone also. We'd like to organize them in an iPhoto album so it can be managed from the Mac and get them out of h
-
While tring to coonect to SQL server from MS excel getting Login Failed error
Hi I am trying to connect to SQL Server DB from another server using the MS excel connect to SQL server in other data sources option. When I am trying to connect I am getting the following error, "Login Failed For User xxxx\yyyy". In the DB server th