Change status not appearing
Hi All,
In planning work flow change status not appearing to promote and write annotations.,please advice
Regards,
Prabhu.
Hi,
That's probably the planning unit is assigned to someone else. You can see who is the current owner.
If this is the case, you can ask the owner user to submit it back to desired user.
Cheers,
Alp
Similar Messages
-
Customer Master email field - change log not appearing
Hi experts,
We noticed that the changes to the email address are not appearing in the change log for customer master. Is this always the case? Will it be possible to include the email address in the change log? If so, how?
Thanks!Sorry.. not an issue
-
Over the past year or so, I have been unable to fully sync my iPads with outlook 2007 calander. Now I have an iPhone 5s, and really need the calander fixed. Contacts seem to sync in both directions, and any new or changed cal enteries in outlook appear on the device. The problem is that any new or changed calander enteries do not make ip back to outlook 2007, so there is only one-way syncing (down to the device) but no return, for calander entries.
I am now using the latest itunes, which I followed the recommendation delete all apple stuff, and then reinstall, I have used scanpst, built new PSts, etc, am I am stuck.
Not using icloud either.
Not using wi-fi, purely USB cabale sync
Running on Windows XP, SP3
Now IOS 7.0.2 on iPhone and 1 iPad (3rd gen)Kept searching, found this: https://discussions.apple.com/message/23321067#23321067
Bottom line: if you follow the recommendation to delte all itunes software and re-install, it don't work (at least for me and many others).
However, purge the data (certain data) and the data syncs.
I think the folder is Apple Computer\Preferences and it needs to be purged.
To be sure, maybe someone can rename the folder on their system, then run itunes and see if it syncs ok.
The idea is to figure out the least minimum stuff that needs to be touched in order to get a working solution than having to purge all Apple software and then rebuild it all over again.
I had purged other files out of inpatience, but did not want to purge entire folders because I had Safari, and Quicktime software, and did not want to wipe that out, Plus there were software downloads and device backups in some of those folders. But I really believe it is the preferences folder, and I would like someone with the same problem to try it and verify it.
Once the preferences folder is removed/renamed (taken out of the picture) pluggin in the device and go to the INFO (I think that is the iTunes tab) page where you select calanders, contacts, email accounts, etc. They will all be unchecked (because you wiped out the preferences) and you need to reselect them. Then run your sync.
What I had done in testing was create something on the device, and modify something else on the device looking to see what got up to Outlook. I got the good news that something good was happening when I got the conflict message from iTunes, and it showed both Outlook and iPhone, showing the calander entry I changed on the iPhone. Never got that before. After the sync, everything looked good the few test entries were uploaded to outlook.
Now, My Cal is 10L+ enteries, and I am doing 100% sync (I don't select the option to ignore enteries over x days). I also have 1400+ contacts. Before this change, the sync of contacts & calanders took a couple of hours (and only operated ONE-WAY, now the syn is taking less than 5 minutes for this one step.
I am a Windows XP Professional user, x32 bit system, using Outlook 2007, iTunes 11.1.1.11, I am standalone (no exchange server) and have about 10 email accounts (mainly POP) defined. I am using only one calander in outlook, but I have Outlook and 2 gmail calanders in the iPhone.
I am running iPhone 5s and iPad 3rd Gen both with IOS 7.0.2 and a 1st generation iPad with the latest version of IOS 5.x.
If anyone else has success, I'd like to hear, along with your experience. -
Order Status not appeared in /DBM/ORDER
Hi all, one of our branch cannot view the Order Status through T.Code /DBM/ORDER
I've checked and found out that previously the plant configuration incomplete and does not included in "Assign Procedure for Order Status (SPRO).
However i've transport the Order Status configuration into our PRD (Live System) and yet still not captured in our PRD System.
The system only captured the status for Service Order open after the transportation. The rest of the records remains with no status.
How can I refresh, captured and display all the status for previous records????
Regards,
Jenny.Hi,
You can create the subsequent documents to check the status
for example, if you have created the sales order and save it and the status can be change once you create the subsequent delivery document
Hope it is clear,
Please revert if you need more details
regards,
santosh -
Status not appearing in TOC for slides in folder
Hi
i have a sequence of slides. in my TOC i put some in a folder so they appear in one category say section 01
now when i run my exe and open toc status check sign is only available for slides out of the folder. the slides in section 01 has no check mark in fron of them even when these slides are already visited.I'm not 100% sure about how the TOC status works, but I think that in order for it to mark a slide with a checkmark you either need an interaction on the slide (somewhere you click) or need to watch the slide to the end (e.g. without anything stopping it from going to the next page).
To disable the status in the TOC you open up the TOC settings and remove the tick in the "Show flag" box. Then your TOC will not have the green checkmarks anymore.
/Michael
Click here to visit the www.captivate4.com blog -
Period change is not appearing in accounting view of material master
Hello SAP lovers
As we know once we close the period with MMPV, Latest perion appeared in material master --> Accounting view.
Now period open is March 2007 for a company code. It is expected that material created in all the plants assigned to same company code should display latest period in accounting view. This is happening for all thousands of material in system but i found 1 material which is displaying the period as Nov 2006.
I have doubled check that this material is created for the same plant which is assgned to the company code for which Mar2007 is open....
Anybody ......Any clue......
Best Regards
AvinashHello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash -
PF Status not appearing for REUSE_ALV_GRID_DISPLAY
Hi,
I am not able to display PF status from REUSE_ALV_GRID_DISPLAY. I have gone through various codes in SDN but of no help. I think I am doing something wrong. PLZ go thru my below code and let me know where am I doing it incorrectly:
data: lf_events TYPE slis_t_event,
l_status TYPE slis_formname VALUE 'PF_STATUS_BTCS'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = sy-repid
i_callback_pf_status_set = l_status
i_callback_user_command = 'USER_COMMAND_1'
FORM eventtab_build USING u_lf_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = u_lf_events.
READ TABLE u_lf_events WITH KEY name = slis_ev_pf_status_set
INTO ls_event.
IF sy-subrc = 0.
MOVE l_status TO ls_event-form.
APPEND ls_event TO u_lf_events.
ENDIF.
ENDFORM.
FORM pf_status_btcs USING rt_extab TYPE slis_t_extab.
DELETE RT_extab WHERE fcode = '&RNT_PREV'.
SET PF-STATUS 'PF_STATUS_BTCS' EXCLUDING rt_extab.
ENDFORM. "PF_STAT_BTCSHello,
Keshav has already given the solution & let me explain the use of this I_CALLBACK_PROGRAM.
Inside the FM 'REUSE_ALV_GRID_DISPLAY' there is a dynamic call to this subroutine passed to I_CALLBACK_PF_STATUS_SET in program passed to I_CALLBACK_PROGRAM.
Also make sure that the GUI status 'PF_STATUS_BTCS' is defined for the program, you can check this in SE41.
BR,
Suhas -
Changes made in Console not appearing on portal until restart.
When I make any change using the Console, such as changing the title of a channel, that change does not appear on the Portal unless I restart it. Does anyone have any advice?
The following errors occur:
In iwtPll logs:
8/14/02 12:36:15 PM EDT: Thread[Thread-171,5,main]
Cannot get service handler for synchronize :
java.lang.ClassNotFoundException: Service class not found:synchronize
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(ClassNotFoundException.java:69)
at com.iplanet.portalserver.naming.WebtopNaming.getServiceClass(WebtopNaming.java:126)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.getServiceHandler(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
in iwtProfile log
8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
setAttrPrivValues.walkTree
com.iplanet.portalserver.profile.service.ProfileServiceException: 321^Supp
lyQuickplace-title-at
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.netscape.server.http.servlet.NSServletRunner.Service(Compil
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
ProfileResponse: exception key:321
8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
ProfileResponse: exception string:SupplyQuickplace-title-at
8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
ProfileRequest.GetProfile:In atts 1
8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
ProfileRequest.GetProfile:In privs 0The exceptions indicate that there is profile service errors which could have happend when it was trying to fetch those attributes.
What version of portal are you using ?, are you running a multi server instance ?, if so there is a possibility that the profile cache could be out of sync between the two instances. Generally making profile changes would necessitate the need to logout and log back and only when you change ldap auth information or property file changes you would need to make server restarts .. -
Changes of inapps prices do not appears in native Android viewer.
Hi All.
First, have created new Inapps with some price - 18 UAH . Then changed prices ( 10 - 16 UAH )
Changes do not appears in native Android viewer.
Rebuilding and reinstalling do not give any changes.
Any ideas ?Hi Dmitry,
This is a Google Play caching issue. We ask the store for the price, and if they are still returning your previous price there is nothing we can do about it. I suggest waiting a day for Google’s system to update and then try checking the price again.
Neil -
Edit changes do not show in the photo as they are made.
I'm using the trial version of Aperture 3 trying to edit my photos. I've imported them by leaving the originals where they are on my HD. When in the edit mode the changes do not appear in the photo. Nothing happens. I assumed I would see the changes in the photo as they were made. Any ideas why this is happening. The trial version is supposed to be fully operable.
rakershaw wrote:
I'm using the trial version of Aperture 3 trying to edit my photos. I've imported them by leaving the originals where they are on my HD. When in the edit mode the changes do not appear in the photo. Nothing happens. I assumed I would see the changes in the photo as they were made. Any ideas why this is happening. The trial version is supposed to be fully operable.
How are you looking at your photos after making the changes in Aperture? If you're looking at them in their original location you will not see any changes because Aperture doesn't change the master file.
You will see the changes in Aperture. If you want to use one of the images that you modified you need to export it from Aperture. See File->Export->Version -
I canu00B4t modifyRowInDB, but not appear error...
Hi, i have a problem... i´m doing a SmartSync Project, and i want modify a row with the method modifyRowInDB.
My steps are:
public void modificarIMP (String BO, String m, Vector lista) {
for (int i = 0; i < lista.size(); i++) {
try {
dbAccess.modifyRowInDB(BO,(String)lista.elementAt(i), m, 4);
} catch (SmartSyncException e) {
e.printStackTrace();
} catch (PersistenceException e) {
e.printStackTrace();
lista = Vector of SYNC_KEY
m = new value
4 = column for modified
public void modifyRowInDB(
String syBName,
String syncKey,
String newValue,
int col)
throws SmartSyncException, PersistenceException {
String syncBoName = syBName;
// Set default Syncboname for this example in case value is null.
SyncBo syncBo = getSyncBoInstance(syncBoName, syncKey);
SmartSyncTransactionManager transactionManager;
// A transaction manager is valid for one action starting with beginTransaction and ending with commit/rollback
// In this example we commit (save) every modification - no rollback.
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(syncBo, arrayHeaderFieldNames[col], newValue);
//Commit the transaction
transactionManager.commit();
Not appear error, but not modify the row, what happend?
Thanks,Hi Victor,
You are trying yo modify a row but the chages are not appearing. It may be due to conflict between client and backend. In case of conflict backend wins. So it may be a case of conflict in which your changes are not appearing.
Regards,
Gopal. -
Dreamweaver upload not appearing on website
Sometimes when I use Dreamweaver to upload the changes are
not appearing on website and sometimes they appear only after a
delay. How can I fix this server issue?> Sometimes when I use Dreamweaver to upload the changes
are not appearing on
> website and sometimes they appear only after a delay.
How can I fix this
> server issue?
It's more likely a browser cache issue.
try hitting the refresh button in the browser several times.
Or find the key combo for that browser that forces a reload.
or- hand type a fake parameter after the file name in the
browser's url
address line. Add ?something such as
http://www.example.com/filename?addquestionmarkandfakeword
this will fool the browser into thinking it's a dynamic page
so it will
ignore a local cached copy and request the page again from
the server
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Create Service Agreement - In Status field, "Release" is not appearing.
Hi folks,
I am creating a simple Service Agreement in CRM Web UI. Entered all data required like Customer, product, org details, price discount etc.. and tried to "release" before saving.
In the Status field "Release" option is not there to select. I see only "In Process" and "Completed".
Can anybody tell me how to make 'Release' available, so that I can release the document and save it.
The price is not determined for the product. Could that be the reason?
The document is error free as I don't see errors in App log.
Please give me and idea to resolve. Will be generous in giving points.
Regards,
JohnHi Shashidar,
Thank you for your response. Here is the following steps I did:
1. Status profile is CRMORDER
2. In this status profile, I see the following: Open with status No.10
In Process - 20
Completed - 30
Rejected - 40
3. I added a new entry for Released with status number: 50
4. I have taken care of the Lowest and Highest Limits.
5. I also checked the 'Object Type' as 'Agreement'
Now, I am not clear which Business Trans I should assign. In the drop down list, I see many Bus.Trans for 'Release'
such as APRL - Release / CALL - Release / CREL - Release and so on.
My question is, which one of these should I select. I tried couple of them, it did not work. (Release still not appearing on CRM7.0 Web UI)
Currently, I am trying to release a Service Agreement on the Web UI. I played around with lowest and highest limits a couple of times and it changes accordingly in Web UI. But some reason 'Release' is not visible which carries the status No.50.
I wonder what is going wrong. Any help would be well appreciated with generous points.
Thank you in advance,
Fred -
Change button is not appearing in the SC after SP Application
Hi SRM Gurus,
Change button is not appearing in SC check status after Higher SP Applicaation implementation.
Can any body tell what will be the reason and solution..
Thanks in advance
CK
Edited by: CK on May 13, 2009 6:30 AMFound OSS note to fix problem
Standard implementaion of Badi BADI BBP_WFL_SECUR_BADI had got activated because of OSS note 1022237 which got applied as part of SP 14. This BAdi was setting the WFL security level to 0 for all users.
After deactivation of Badi Change button is appearing
Thank you -
Xmonad Status Bar Not Appearing
Hey guys I've been reading through posts and trying to get dzen2 to appear. But it simply doesn't show up.
So I tried using a default status bar
main = xmonad $ defaultConfig {
logHook = dynamicLog
Provided from
http://xmonad.org/xmonad-docs/xmonad-co … icLog.html
and I still do not have any status bars appearing.
Refer Below, changed my current xmonad configuration.
My xmonad.hs is based of thayer's configuration.
Last edited by Jabrick (2011-10-30 22:01:26)Ok I've finally got a dzen bar to appear.
In my xinitrc where i normally start xmonad
I now have the line
exec xmonad | dzen2
But nothing appears in the bar I've tried several examples and it doesn't seem to work.
Is there something I'm missing?
I do have a ~/.conkyrc file
That looks like
# Conky Config File
# just log everything to the desktop
# Main options (alphabetically)
alignment bl
background yes
default_color 606060
draw_outline no
draw_shades no
double_buffer yes
gap_x 10
gap_y 10
minimum_size 100 100
own_window yes
own_window_type override
own_window_transparent yes
total_run_times 0
update_interval 1
use_xft yes
xftalpha 0.7
xftfont Verdana:size=8
# After TEXT is formatted on screen
TEXT
${tail /var/log/everything.log 20}
This is my xmonad config file right now....
If I could just get this to work I can finally tinker around.
Been frustrating! Urgh!
--Imports--
import XMonad
--Actions--
import XMonad.Actions.CycleWindows -- classic alt-tab
import XMonad.Actions.CycleWS -- cycle thru WS', toggle last WS
import XMonad.Actions.DwmPromote -- swap master like dwm
--Hooks--
import XMonad.Hooks.DynamicLog -- statusbar
import XMonad.Hooks.EwmhDesktops -- fullscreenEventHook fixes chrome fullscreen
import XMonad.Hooks.ManageDocks -- dock/tray mgmt
import XMonad.Hooks.UrgencyHook -- window alert bells
import XMonad.Hooks.SetWMName -- matlab fix
--Layouts--
import XMonad.Layout.Named -- custom layout names
import XMonad.Layout.NoBorders -- smart borders on solo clients
--Utils--
import XMonad.Util.EZConfig -- append key/mouse bindings
import XMonad.Util.Run(spawnPipe) -- spawnPipe and hPutStrLn
import System.IO -- hPutStrLn scope
import qualified XMonad.StackSet as W -- manageHook rules
main = do
status <- spawnPipe myDzenStatus -- xmonad status on the left
conky <- spawnPipe myDzenConky -- conky stats on the right
xmonad $ withUrgencyHook NoUrgencyHook $ defaultConfig
{ modMask = mod4Mask
, borderWidth = 2
, normalBorderColor = "#dddddd"
, focusedBorderColor = "#0000ff"
-- , handleEventHook = fullscreenEventHook
, workspaces = myWorkspaces
, layoutHook = myLayoutHook
, manageHook = manageDocks <+> myManageHook
<+> manageHook defaultConfig
,logHook = myLogHook status
, startupHook= setWMName "LG3D"
`additionalKeysP` myKeys
-- Tags/Workspaces
-- clickable workspaces via dzen/xdotool
myWorkspaces :: [String]
myWorkspaces = clickable . (map dzenEscape) $ ["1","2","3","4","5"]
where clickable l = [ "^ca(1,xdotool key super+" ++ show (n) ++ ")" ++ ws ++ "^ca()" |
(i,ws) <- zip [1..] l,
let n = i ]
-- Layouts
-- the default layout is fullscreen with smartborders applied to all
myLayoutHook = avoidStruts $ smartBorders ( full ||| mtiled ||| tiled )
where
full = named "X" $ Full
mtiled = named "M" $ Mirror tiled
tiled = named "T" $ Tall 1 (5/100) (2/(1+(toRational(sqrt(5)::Double))))
-- sets default tile as: Tall nmaster (delta) (golden ratio)
-- Window management
myManageHook = composeAll
[ className =? "MPlayer" --> doFloat
, className =? "Vlc" --> doFloat
, className =? "Gimp" --> doFloat
, className =? "XCalc" --> doFloat
, className =? "Chromium" --> doF (W.shift (myWorkspaces !! 1)) -- send to ws 2
, className =? "Nautilus" --> doF (W.shift (myWorkspaces !! 2)) -- send to ws 3
, className =? "Gimp" --> doF (W.shift (myWorkspaces !! 3)) -- send to ws 4
, className =? "stalonetray" --> doIgnore
-- Statusbar
myLogHook h = dynamicLogWithPP $ myDzenPP { ppOutput = hPutStrLn h }
myDzenStatus = "dzen2 -w '320' -ta 'l'" ++ myDzenStyle
myDzenConky = "conky -c ~/.conkyrc | dzen2 -x '320' -w '704' -ta 'r'" ++ myDzenStyle
myDzenStyle = " -h '20' -fg '#777777' -bg '#222222' -fn 'arial:bold:size=11'"
myDzenPP = dzenPP
{ ppCurrent = dzenColor "#3399ff" "" . wrap " " " "
, ppHidden = dzenColor "#dddddd" "" . wrap " " " "
, ppHiddenNoWindows = dzenColor "#777777" "" . wrap " " " "
, ppUrgent = dzenColor "#ff0000" "" . wrap " " " "
, ppSep = " "
, ppLayout = dzenColor "#aaaaaa" "" . wrap "^ca(1,xdotool key super+space)· " " ·^ca()"
, ppTitle = dzenColor "#ffffff" ""
. wrap "^ca(1,xdotool key super+k)^ca(2,xdotool key super+shift+c)"
" ^ca()^ca()" . shorten 20 . dzenEscape
-- Key bindings
myKeys = [ ("M1-<Tab>" , cycleRecentWindows [xK_Alt_L] xK_Tab xK_Tab ) -- classic alt-tab behaviour
, ("M-b" , sendMessage ToggleStruts ) -- toggle the status bar gap
, ("M-<Tab>" , toggleWS ) -- toggle last workspace (super-tab)
, ("M-<Right>" , nextWS ) -- go to next workspace
, ("M-<Left>" , prevWS ) -- go to prev workspace
, ("M-S-<Right>", shiftToNext ) -- move client to next workspace
, ("M-S-<Left>" , shiftToPrev ) -- move client to prev workspace
, ("M-r" , spawn "xmonad --restart" ) -- restart xmonad w/o recompiling
, ("M-x" , spawn "chromium" ) -- launch browser
, ("M-S-x" , spawn "chromium --incognito" ) -- launch private browser
, ("C-M1-<Delete>" , spawn "sudo shutdown -r now" ) -- reboot
, ("C-M1-<End>" , spawn "sudo shutdown -h now" ) -- poweroff
, ("<XF86AudioMute>" , spawn "amixer -q sset Master toggle") --Toggle Volume
, ("<XF86AudioLowerVolume>", spawn "amixer -q sset Master 2- unmute") -- lower volume
, ("<XF86AudioRaiseVolume>", spawn "amixer -q sset Master 2+ unmute") -- raise volume
, ("<Print>" , spawn "import -window root `date '+%Y%m%d-%H%M%S'`.png") --Take a Screenshot
Maybe you are looking for
-
If someone could please help me
-
Aperture not working properly in iLife, iWork, and Mail
I am placing this issue in Aperture as it occurred after the 3.1.3 update. We use Photo Browser to place a photo in a Mac Mail, iLife and iWork. With the update, 3.1.3, using Photo Browser we see only the first photo per project. In Aperture we do se
-
How to remove the worksets from the Top level navigation for the ESS role.
Hi All, I am working on enabling and disabling certain services in the ESS worksets. we are using EP 7.0, ECC 6.0 (NW2004s). When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible i
-
First and foremost, thanks for helping... I've been running into a problem with my WRT54G. When I try to access the admin page at 192.168.1.1, it will ask for the password and accept it, but then the page loads VERY slow (sometimes timing out), and
-
so i open itunes and there is nothing there. nada. idk what happened but all my music and apps and videos disappeared. so i went into my itunes folder and it has 2 files. "itunes library" (which is now like 200 kb cuz its empty), and "itunes library