Change stock type in IQ02

How to change the value of the stock type using IQ02? Do I need to do any configuration in SPRO in order to make it modifiable? Currently in IQ02, this field is not allowed to change.

Hi Yean,
in my system i'm able to change the Stock Type. i think some thing you are missing , may be as you said it is the config problem.
Regards
vijay

Similar Messages

  • Changing stock type on serial profiles.

    I am trying to change the stock type on a serial number.  It is currently 07 blocked stock.  The stock is all unrestricted and in bin locations.  Nothing has been blocked on this and I am not able to change the stock typ using IQ02.  Please advise

    Dear Joe Tichenor  
    Welcome to SCN,
    What error you are geting in IQ02? (Error Msg.# or Screenshot)
    What are the steps you are following.?
    Reg,
    Bhg

  • Badi for changing Stock type in MIGO transaction

    Hello ALL,
    IS there any BADI or EXIT for changing stock type in MIGO when we are doing GR against PO then we need to change the Stock type  to Unrestricted stock.
    Please let me know.Awarded if useful.
    Regards

    hi,
    Look into the BADI     MB_MIGO_BADI.
    or
    Exits:
    MBCF0009 Filling the storage location field
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0011 Read from RESB and RKPF for print list in MB26
    Sirish

  • How to Change stock type of SERIAL NUMBER using IQ02 ?

    Does anyone know how I can change the stock type from stock in transfer (stock type 04) to unrestricted stock (stock type 01), using IQ02?
    Quantity of material is updated while posting document with movement 313 but the stock type of Serial is still not updated.
    I will really appreciate a response.

    Hi,
    Stock in transit is not a stock type.
    Stock in transit is "Quantity of a material that has already been withdrawn from storage at the issuing plant on the basis of a stock transport order, but has not yet arrived at the plant to which it is being transferred (receiving plant)'.
    and you can do sto only from unrestricted stock.
    There are three types of stock which are provided by SAP -
    1) Unrestricted use stock;
    2) QI (Quality Inspection) stock; and
    3) Block stock
    and Special stocks which are all coming under above three types of stocks only.
    for your problem first you do GR, in MIGO screen you can select stock types.
    if your material assigned with serial number, when doing MIGO itself, you will be asked to enter the serial numbers(if it is manual assignment).
    Edited by: Prabhaharan SAP MM on Jul 19, 2011 10:03 AM

  • How to change stock type of GR in BAPI_REPMANCONF1_CREATE_MTS

    Dear All,
    We faced a problem at confirmation in repetitive manufacturing. Actually we would like the goods-receipt(GR) to be posted to quality or blocked stock. If we use the transaction MFBF, there is an option where we can set it. The menu path is Edit->Change detailed settings. There is the stock type. The material document has been posted correctly as it is expected. But when we want to post the confirmation through BAPI_REPMANCONF1_CREATE_MTS, I did not find any option to enter the stock type. I also looked for some solution on the internet, but so far I have found nothing. Does any of you have any experience or idea how to solve this issue?
    Thank you in advance!
    Rgds,
    Viktor Bojtos
    Hungary
    Edited by: viktorbojtos on Sep 10, 2010 5:49 PM

    Dear All,
    The promlem has been solved by myself. In user-exit XMRM0001 (EXIT_SAPLBARM_001) we have the chance to set the stock type. There is an import strucutre I_RM61B which is created based on strucutre RM61B. If we enhance the structure RM61B with additional field (ex. ZZINSMK) we can pass the relevant value to the user-exit trough this structure, because it is available in the BAPI as import parameter.
    Rgds,
    Viktor Bojtos
    Hungary

  • Change stock type

    How do you change a stock type within a purchase order?  Right now I need to change a stock type from a 1 (warehouse) to a 4 (blocked).  Where on a purchase order would I change this?

    Hi,
    You can change the stock type in PO under "Delivery Tab" in Item Details block.
    Hope this helps you.
    Regards,
    Nikita

  • Change in Stock Type in Back Date

    Dear Friends,
    Is there any way to change stock type (from Restricted-Use to Unrestricted-Use) in back date? (other than MSC2N)
    For Example:
    I have posted a stock in August in restricted-use by GR. Till now, it lies in restricted-use only.
    Now, I want to make change in stock type from Restricted-use to Unrestricted-use in august only.
    Is it possible?
    I have tried using MSC2N but its change stock type on current date.
    Also, in MIGO Transfer Posting by Mvt Type 342/341 is not allowed.
    Is there a way out? Thanks in advance.
    Ragards,
    Jignesh

    hi,
    You can allow back posting for a month back by :
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 26/08/2008 for aug. 2008 month to be opened as of now...
    then go to MIGO...
    Now is will allow you to post...
    hope it helps...
    Regards
    Priyanka.P

  • How to know which stock type updated within movement type

    Expert,
    I need to know which stock type updated within each movement type.
    I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
    I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
    And then i'm facing this :
    Ilustration :
    MIGO transaction - Goods Receipt PO - Stock Type Unrest
    in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
    MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
    in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
    MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
    in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
    in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
    I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
    How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
    I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
    Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
    Thank you so much.

    The stock type indicator doesn't update for the movement type 322 in table MSEG.
    At the time of transferring, you do not have to enter the stock type for movement type 322.
    I can give you one clue, check can it fulfill your requirement.
    You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
    You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock.

  • PTP - Change to stock type field status configuration in Purchase Order

    When creating or changing a PO for direct material - or even during goods receipt, the stock type field which by default is "X - Quality Inspection" can be changed to "Unrestricted Use" by the purchasing personnel.  This is not in line with QA requirements where the change from QI to Unrestricted use can only be done by QA personnel.
    Need to configure the system not to allow purchasing personnel to change the status.
    Please tell me  where i need to configure the above requirement.
    Regards
    Sreekanth

    HI,
    You will need to change screen layout at document level in ME21N and ME22N. Follow below steps
    SPRO -> Mateial Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document levle -> ME21N -> Look for Quality Inspection (I believe this is the field, I did not test it) and make it Display only. By default it comes as Optional entry.
    Regards,

  • Stock Type Changes for Storage Unit Mgt.

    Hello,
    I am looking to develop an R3 system program (in ABAP) which based on certain criteria can change a storage unit's stock type between unrestricted, quality, and blocked.  I know there is a BAPI, 'BAPI_GOODSMVT_CREATE', which can be used to do the Posting Change in IM and there are function modules, L_TO_CREATE_SINGLE, etc, which can be used to create/confirm transfer orders for the storage unit in WM, but I was hoping someone can provide guidance on how I could make this simpler.  Is there a one-step method I can use to combine the movements for IM and WM (either programatically or through configuration).  Any help would be greatly appreciated.

    Hello Allen,
    Thanks for detailed explaination,
    Here is the one BAdi available to meet your requirement ( SPRO-> Log Exe -> Warehouse management -> System Modification -> BAdi in WM -> Badi for Quant determination)
    <b>Business Add-In for Quant Determination</b>
        Application components: LE-WM, LE-WM-TFM
    <b>Use of this component</b>
    You can use the BAdI LE_WM_LE_QUANT in the Warehouse Management system (WMS) to influence quant selection for a posting change notice after the system has determined all of the quants that correspond to the specifications in the posting change notice.
    if the system has determined more quants than are necessary for processing the posting change notice, you can restrict the quant selection further, so that you can process the posting change notice in the background.
    Hope this will be helpful
    regards,
    Arif Mansuri
    Reward if answer is helpful.

  • Change field Stock Type in transaction MIGO

    HI Gurus
    My user wants to change the field Stock Type in good receipt after that good receipt has been created .
    Is there a way to change this field ? Using transaction  MIGO  can only display the good receipt .
    Thanks in advance

    Once GR has been done you can not change the stock type in display.
    Using MIGO at the time of goods receipt you can change the stock Type. Once you have posted to a wrong stock type then you need to do the transfer posting from stock type to stock type.
    Explain your requirment?
    Check [Stock types|http://help.sap.com/saphelp_46c/helpdata/en/a5/63393f43a211d189410000e829fbbd/content.htm]

  • Stock type change inMIGO

    Hi All,
    we are doing a 2 step GRN with movement type 103 and 105. At the time of releasing the GR blocked stock with movement type 105 I want the stock type to automatically come up as unrestricted stock. I think there is a standard configuration which I am unable to locate. can someone help me out please. 
    Regards
    Gurvinder

    As per my knowledge, with standard settings, action can only be among the predefined types - goods issue, goods receipt, or transfer posting etc.
    I am not aware if any SPRO settings are there for changing this.
    GR into blocked stock is a specific movement type. So that goes under MVT type field.
    Hope that helps.

  • Change material type

    When i am changing the material type i am getting this msg. In Po items were deleted.
    Change Material Type
    The material type cannot be changed.
    The reasons for this are:
    Valuated stock exists (see valuation areas below).
    However, account determination for the two material types differs.
    (different account category reference or no valuation data defined)
        Valuation area
        1030
    No open purchase order are there.

    hi
    plz check mmbe for the stock
    check for the open PR and PO in ME5A and me2m
    then try Change material type
    Material Type can be changed using transaction MMAM
    Menu: - Logistics > Material Management > Material Master > Material > Change Material Type
    u can also use MMZ2 to change material type and ind sec
    Refer following link for the same;
    http://www.sap123.com/showthread.php?t=21
    regards
    kunal

  • How to change material type and industrial sector of the exsisting material

    Hi,
    There is an issue where user wants to change material type and industrial sector of the exsisting material .Is  it posible to do so??
    IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector  can be created.
    Points will be definitely rewarded.
    Thanks
    Rohit

    Hi Rohit,
    You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
    Remember the new material type should have same attributes same as old material type.
    OLD Material New Material
    1) Standard Price 1) Standard Price
    2) Manufacture part 2) Manufacture part
    profile actvated profile actvated
    3) Quantity & Value 3) Quantity & Value
    Updation in all areas Updation in all areas
    4) should have same GL 4) Should have same GL acs
    acs
    It is not possible to change Industry sector once created.
    If you want to delete the Material, you can flag it in MM06 trxn code.
    Reg,
    Ashok
    Dont forget to Assign points if useful.

  • How to transfer special stock type ''O'' from unrestricted into blocked

    Hello!
    I would like to finD out if there is any movement type which would move sprecial stock ''O'' (provided for Vendor) from unrestricted to blocked? The stock should still belong to vendor afterthat.
    We want to move the quantity of some batches into ststus blocked as we do not want them to be used (bad quality) - the are physicaly at vendor. We move this unavailable materials from vendor to our plant every 2-3 months and would need to have accurate information about unrestricted stock.
    Many thanks in advance for your answer.

    Hi ,
    For the stock of material provided to vendors, the available stock types are unrestricted-use stock and stock in quality inspection. So you can NOT change the stock type to blocked.
    I suggest you create a special storage location for this purpose.
    Best regards,
    CM

Maybe you are looking for