Change storage type

I thought this would be easily solved with a few searches.. but no...
I'm trying to do some testing in a development box but i needed inventory to consume. So I did a 561 for god-awlful amount of stock so I don't have to do this again.
My problem is that the plant is WM managed. After the posting in IM I checked in LS26 and my stock is showing in storage type 998. I need it to be in storage type 108. I was able to get to a TO number in LS26. It has been confirmed.
What transaction can I use to change the storage type and what transactional data would I need.
I've searched using the following parameters
- SAP WM "How to" change storage type
- SAP WM 561
And several variations of the above.
Thanks!!
Craig

Ok.. I was in that screen earlier but had trouble with it. Went back to it again and finally got it! The key was to use 999 movement. I wasn't sure what to use there.
Thank!
Craig

Similar Messages

SAP Warehouse Management change Storage Type Bin type while creating TO

My requirement is to find an exits which allow us to change the Destination Storage Bin and storage type when creating Transfer orders through Inbound Deliveries.
I have tried using "MWMTO003", "MWMTO004". But the problem here is that none of the funtion exits have both storage type and bin as exporting parameters.
The exit "EXIT_SAPLL03A_001" has Destination bin (LTAP-NLPLA) as a changing parameter but not Destination storage type.
I have activated the check box to trigger User exits using SPRO->LE->WhM->Master Data->Define Storage Type and Activate.
I got a BADI "LE_WM_STORAGETYPE_HU" with both Storage bin and type as changing parameters but then when I activate it and put a break point. My control never stops there.
Kindly Suggest what is the correct User Exit required for this?
Do i need two User Exits to change Storage Type and Storage Bin?
Kindly provide how to approach.

I managed to change the casetype now by
1) Changing the corresponding SCMG_T_CASE_ATTR entry
2) Changing the record model POID in the XML file of the case, by manually parsing and replacing the XML
Still wondering if this is a valid approach, or if I've overlooked something...

Change storage type. Please

Hi Guys,
We are using storage type search
3 storage types are defined for the storage type indicator 001.
In WM we have over 20 different storage types.
The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
Manuel

Hi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta

Change storage type during putaway

Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
Andrea

Hi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks

Change storage type in transfer order

For next empty bin strategy, the transfer order proposes next empty bin in a given storage type. Via tx LT1E , it is possible to change a storage bin and quantity in the transfer order and confirm the same.
However, Our requirement is to change the storage type & storage bin in a transfer order already created. Is there any user exit or programme we can modify to do the same

Hi,
Pls put in MM forums and get help immediately.
Regards,
Anil

Changeability of storage type

Hi Guys,
- We are using storage type search
- 3 storage types are defined for the storage type indicator 001.
- In WM we have over 20 different storage types.
- The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
Manuel

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

Change in Transfer Order for Storage Type & bin

Hi,
I want to change destination bin change during TO Creation. Steps are given below.
a) SPRO : Storage type setting: Two options are t there in stock placement section
                 Storage bin cannot be changed during confirmation
1     Storage bin can be changed during confirmation
I set it to 1.
b) LT06 : TO Created.
c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
Could you please advice me how to change TO Bins change during confirmation.
Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
Thanks ,
Gupta

Hi Gupta,
In WM customizing - master data - storage type - in the detail data of
the relevant destination storage type you set the flag
'Dst bin ch. during confirm.' from space to 1. Then the destination
storage bin "in general" can be changed at confirmation time.
Additionally you need to setup for the movement types that you are using
that you work with the new confirmation list, see detail of the movement
types, box screen control. (Try changing this setting to '1').
Please also read in the R/3 library - logistics - logistics execution -
warehouse management - warehouse movements - transfer orders - transfer
order confirmation - confirming transfer orders.
Here it is described when the destination bin can't be changed even
with the correct customizing settings.
If you set the indicator for Destination bin change during confirmation
for the desired storage type in Customizing for Warehouse Management
under Logistics Execution -> Warehouse Management -> Master Data ->
Define Storage Type, you will be able to change the destination bin when
confirming a transfer order if, for example, the destination bin
proposed by the system is damaged.
NO destination bin can be entered during confirmation for:
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item
Please check if your TO is related to one of these cases !!!
Regards,
Mauro

Storage Type change in the transfer order after creation with MDE

Hello ,
With the MDE transaction ZMDETSP the transfer between storage locations is done and the transfer order created in the background.
I would like to know if in standard SAP the modification of the storage type is possible after the TO is created therefore also in MDE.
I changed the bin with LT1D but impossible for the storage type.
I know, user exits BUT there must be other solutions, no ?!!
Thanks in advance for your answer(s),
Patricia

You have to do the configuration to change the storage type in TO.
IMG>LE>WM>Strategies>Activate storage type search , Here you have to give both the storage type.
Also you need to change the storage type at the time of TO creation not duirn confirmation

Sequence change of storage type in TO

Hi Experts,
My client requires to pick the materials in descending order like:
I have a outbound delivery with number of materials which belong to different storage types.
suppose one material belong to 005 stor type, another mat belong to 003 stor type & another mat belong to 001 stor type.
At present for such deliveries system is picking items sequencially means first 001, 003 & 005.
My client wants make the system to pick the items belong to highest number first and the lowest last like: Pick 005, 003 & 001.
Can any expert advise me to how to do that.
Thanks
Srini

In SPRO, go to Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data / TO Split.
In Define Profiles: -
For Sort profile for TO splitting, create a profile for the warehouse to be sorted by storage type. There's a check box which appears against the sort field. This is to sort the items in the descending order of the sort field. Check this box.
For Profile for Transfer Order Splitting, create a split profile to include the above sort profile.
In Control for Performance Data Processing / Define TO Split: -
For Performance data control, for a given source and destination storage type and movement, enter the above TO split profile.
This setting will not split the TO (if no split criteria specified), but sort the items in the TO as per the sort profile.
Let me know if it works.
Thanks
Swagat

How to delete all HU in one storage type

Dear experts I did use the /SCWM/ISU for uploading of the stock but now I need to change something in the structure of the storage bins.
I cannot change anything, because the bins are having HU already. Could someone give me a tipp how I can delete all HUs from one specific storage type?
Thanks in advance
BR
Denis

Hi Denis,
If the HUs are empty then the above solutions as Pet and Ifran mentioned should work for you. Else, if you have stock in the HUs then you need to scrap the stock, you can do this using /n/scwm/adgi look up the HUs then scrap them. This will empty the bins.
Thanks,
Faical

Batch determination based on WM storage type stock positions

Hello experts,
I am hoping the get some advise on the best method to achieve this:
We have batch determination turned on for select customers and the system is proposing stock that is mainly in our each or lose pick storage types (110), the issue with that is the fact that we do not pick in less then case qty for those customers so if the stock doesn't exist in our general storage the user must re-determinthe batch codes before delivery release.
This process is becoming very time consuming so I would like to improve it.
My first thought is to create a custom check in the batch search strategy that will only propose batch codes that exist in our general storage (search strategy based on WM stock positions)
Are there any other options to achieve a batch search strategy based in WM stock positions other then the one above and does that solution sound practical?

I'm not referring to the type of picking either (i'm not referring to picking strategies at all). I'm referring to storage type search criteria defined in OMLY.
"We need batch determination based on WM storage type stock positions" -> you are running BD at delivery level and therefore, there is nothing from a standard perspective that we can do to run BD based on WM storage type again. Since the BD has already occurred, we need to find other venues to direct the pick to the appropriate storage types.
This is what I'm understanding but I reckon there's something that I'm missing and so let's take the below example and then you can get back with corrections:
R001 plant
ZM01 storage location
Z01 WH
110, 120, 130, 140 storage types (110, 120, 130 are case/lose pick, and 140 is general)
Since you had mentioned earlier that the BD is running at plant level, I'd assume the storage location ZM01 is automatically determined (since the batch resides in ZM01). Since the batch is already determined, based on your 'storage search strategy' (110, 120, 130) the system tries to pick this batch in these storage types. Now, when there is no full case, you have to manually change the storage type to 140 to pick and this is where the problem is. So, I was recommending that since there is no standard way to automatically pick the full case from 140, use the enhancement.

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

Erorr while changing storage location in VL02N

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

soumya - I did assign the picking location for my combination. However I noted, if i do this bit, i'm not able to create replenishment delivery from vl10b and erroring with below error. If i remove this assignment, i am able to create the delivery but delivery does not have storage loation. when i tried to change the storage loation in vl02n, i'm getting same below error ...
Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /
Sivanand - Wheni do transfer order, its complaining that storage location is empty when i try to change storage location, as mentioned above, i 'm getting above error....
appreciate any inputs ....
I DID CREATE THE 647 MOVEMENT TYPE ASWELL BUT I'M GETTING SAME ERROR ... Can anyone suggest what control information should go when creating 647 mvt type.....?
Edited by: Kasu on Sep 10, 2008 10:56 AM

Badi for changing Stock type in MIGO transaction

Hello ALL,
IS there any BADI or EXIT for changing stock type in MIGO when we are doing GR against PO then we need to change the Stock type to Unrestricted stock.
Please let me know.Awarded if useful.
Regards

hi,
Look into the BADI MB_MIGO_BADI.
or
Exits:
MBCF0009 Filling the storage location field
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0011 Read from RESB and RKPF for print list in MB26
Sirish

HU without inventory management and message L3778 in storage type 999

Hi experts,
Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
1. our warehouse is HU & WM managed.
2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
5. system has moved the stock from the bin to difference storage type 999.
Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
Is there a process wherein we can post this stock to another bin and repack into the old HU?
Thanks,
Harish

Thanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
4. Confirm the transfer order using LT12.
5. Perform PGI for the delivery.
6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
Best Regards,
Harish

Change storage type

Similar Messages

Maybe you are looking for