Change structure for list editing of functional location

What is the significance of change structure for list editing (t code il04) of functional location?

just enter the functional locations you need to create and descriptions and save

Similar Messages

  • How to get the "last changed by" for a set of function modules?

    How to get the "last changed by" for a set of function modules?
    is there any table to get it??

    See [this|Re: Date of creation of function module] I posted earlier.
    >TFDIR will give you the name of the function group program and the include number.
    >E.g. SAPLZFUNCGROUP Include 01.
    >From this you can construct the include name: LZFUNCGROUPU01.
    >You can look this up in TRDIR to find the creation date (CDAT) of the function module.
    In your case, you need unam and udat.
    matt

  • IDOC for changing user status to 'HIST' on Functional Location

    Hi.
    Can anyone please support me with an inbound IDOC for changing status on existing Functional Location?
    Thanks.

    Hi ,
    I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
    BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
    BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
    Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
    regrds
    pushpa

  • Equipment list in a functional location

    Hi,
    My scenario is as follow:
    I have a functional location with a equipment list. I have to create a maintenance plan that affects to all the equipments.
    All the equipments have to be controlled with the same parameters.
    How can I act?
    Could I create an unique maintenance plan to the functional location or could I have to create a maintenance plan for ech equipment?
    How can I check that all the equipments are controlled?
    Best regards

    hi
    it depends on your requirement only for example if you cost analysis is based on FL only ,then create one maintenance plan for that FL and attach the equipments in the object list ,hence once the call object is generated you can see the list of the equipment for maintenance activities,the cost incurred will be reflected to the FL
    OR other thing is if all the equipments are to be maintained at regular interval with same parameter then create a maintenance plan with several maintenance item,in which system will create a call object for each maintenance item,drawaback is if you change any parameter ,then it will affect all the maintenance item attached to it
    simple one is create maintenance plan for each equipment
    regards
    thyagarajan

  • How to change layout for list display in background

    Hi All,
    I want to change layout for the list display of tcode fbl1n when i execute in background. is there anyway to select our own layout when i execute in background. When i execute in foreground we can change the layout by selecting change layout button, but how it possible when in backgroung, is there any way please let me know.
    Thanks in advance.
    Regards,
    Vishal

    Hi,
      Create a list variant by executing the program and changing the layout and saving..
      Then use the "Layout" parameter in the selection screen and give the variant you created earlier...
      Then while executing in background the list variant will be pickedup accordingly (given in the selection screen)..
    Hope this helps...
    THanks,
    Naren
    Message was edited by: Narendran Muthukumaran

  • PM module query --Change Delivery Address in PR from Functional Location

    hi all,
    i have to export the value of CAUFVD_IMP-TPLNR to temporay memory from the enhancement "COZF0001" using the user exit "EXIT_SAPLCOZF_001" from the include program "ZXCOZU01" and then import this
    value in the enhancment "MMDA0001" for the user exit "EXIT_SAPLMMDA_001" in the include program "ZXM06U32".
    But the include program ZXCOZU01 from where i have to export the value is not opening.
    Can anyone help me in this. The value to be exported
    is the first parameter CAUFVD_IMP of the corresponding userexit "EXIT_SAPLCOZF_001".

    hi Prabu,
    yes u told correctly. But i need how the address get changed after the fucntional address is assigned to the export parameter E_ADRNR.
    Iam getting the functional address but after assign it to E_ADRNR.
    The value is not updated into none of the internal tables being used in the transaction.
    But in that one internal table is XEBAN is used while iam directly using in the exit
    it is showing syntax error.
    iam unable to update the functional address to PR iam getting only the plant address.
    if  u know about this please resolve this.

  • Sales Order Changes - Tcode for Listing

    Hi, can anyone advise if there's a specific tcode to list SO changes other than viewing them directly in the SO via VA02/VA03?
    Thanks
    PP

    Hi,
    There is no such standard T-code for displaying changes made to a sales order.
    You can take help of technical consultant for developing a report using the tables CDHDR & CDPOS (Header & Item respectively) for all the transactional changes made.
    Otherwise you can also create a query to display changes & person responsible using these tables.
    Regards,
    Vijay

  • List of changes in Equipment and Functional Location

    Dear Colleagues?
    Is there an easy way to get a list of all Functional Location and Equipments changed in the last week?
    Thanks and Regards

    Dear Davison,
    You can use transaction /N/ISDFPS/IL21 , it will give you detailed history of equipments and functional locations with usage change. It''s a DFPS transaction, hope its available in your system, or else you can goto Usage List in extras menu and customize the layout by adding the colums required to get the information you want in case of equipments or goto Usage Period in case of functional location in structure menu.
    Thanks & Regards
    Niraj Visnoi
    Edited by: Niraj Visnoi on Aug 30, 2010 9:14 PM

  • Functional Location field is Grayed out in change mode

    Dear Experts ,
    I have created an equipment automatically  through serial number managed material .
    But the equipment created has no functional location assigned to it .
    Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
    Pls tell me how can i assign a functional loaction to this automatically created equipment ??
    Regards
    Anis

    Hello Thyagrajan ,
    In IMG ...
       Equipments --> Equipment Uasge Period --> Define Installation at functional Location
    I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
    Is ther anywhere else in IMG that i need 2 assign/check .
    while trying 2 assign a functional location for this equipment the system give the error :
    No InstallLocation entered: Data transfer not possible
    Message no. IA036
    Regards
    Anis
    Edited by: anis bazmi on Oct 26, 2009 9:48 AM

  • Use of Field selection for Multilevel list Display Equipment/Function loc

    Dear Expert,
                          Anybody suggest me that how can we use the feature of Equipment & function location settings as given SPRO path.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Equipment ® Define Field Selection for Multi-Level List Displays of Equipment.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Functional Locations ® Field Selection for Multi-Level List Displays of Functional Locations.
    Your help & suggestions are much appreciated.
    Regards,
    Akhilesh

    Dear AKhliesh,
    This customizing setting is for the T-code IE07. You can customize view of IE07 in different strcuture with required fields wants to didplay or suppress.
    Regards,
    Kaushal Rai

  • LSMW for functional location address fields

    HI Folks,
    I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.

    Hi Praveen,
    You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
    Regards,
    Bala

  • Table for maintenance plant for equipment & functional location

    Hi,
    I am trying to identify a table that will give me maintenance plant for a particular equipment & functional location.
    Can you help me identify this.
    Regards,
    Vijay

    Hi
    ITOB is Table for Functional Location which will give Maintenance Plant & for Equipment which will give Maintenance Plant
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Jul 29, 2010 4:32 PM

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • Listing of Functional Locations in a Heirarchical Order in PM module

    Hi Gurus ,
                     I am working on a requirement to display the Functional Locations  in a heirarchical order for a given input Functional Location from table IFLOT. This is to be done by selecting all functional locations with the same String Indicator and the next lower heirarchy level  for a given functional location.
        The above procedure is to be done upto 2 levels.
    For eg  .
    Input given:  AA (Functional location  with heirarchy XX-NN-XX) 
    Then , my report should display
    Level 2      Level 3
    AA-22       AA-22-BB  
    Kindly provide me some useful tips .
    Regards,
    Venkatesh.

    Hi,
    When you are fetching the data from IFLOT
    first table TNAPR field.
    For each TNAPR you have to check Superior FL(TPLMA) field repeatedly till all the below levels have been fetched.
    So the IFLOT select should be in a loop pass.
    After fetching all the Levels of Values for FL, then you can put them in a string by concatenating as per your requirement and display.
    Regards,
    Anji

  • Changes documents for BOM and Routing

    How Can I find the change documents for a BOM and routing?

    Change Documents For BOM
    CS80 - Material BOM
    CV80 - Document Structure
    IB80 - Equipment BOM
    IB81 - Functional Location BOM
    CS81 - Standard BOM
    CS82 - Order BOM
    CS83 - WBS BOM
    Change Documents for Routings
    CA60 - Task List Changes
    CA61 - Routing
    CA62 - Reference Operation Set
    CA63 - Rate Routing
    CA64 - Reference Rate Routing
    Hope the above may help you.

Maybe you are looking for