Change substitution (GGB1) with FAGLFLEXA

Hi,
I have to make a intercompany post, using F-30 (Post with Clearing) for vendors and F-51 for customer accounting. My intention is clearing an vendor/customer item and, in the same time to generate an other item on the new company code, but with other profit/cost center.
I´m using Newgl and these posting on original company code are with his original profit center. When I´m running the transaction F-30 I have not chance to change the profit center of the new company code.
I´m trying use a change substitution, but the table FAGLFLEXA is not available. How can I to make the table FAGLFLEXA available for substitutions?

You should use BSEG

Similar Messages

Dante font used in manuscript - when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

Dante font used in manuscript … when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

OK, we've got it!
What is happening is that when you use Microsoft's save as PDF in Word, the font isn't embedded even though the font is tagged to allow embedding. Furthermore, Microsoft doesn't properly put the font name into the PDF file such that Acrobat or Reader can readily find the font installed on your system such that the text can be properly displayed and/or printed. Acrobat and Reader attempt to display and/or print the text using a “substitution font” and of course, as they say, YMMV (“your mileage may vary”)!
I personally submitted the report of this problem (both the embedding and the font name problem) to Microsoft. They acknowledge the bug, tried a fix and provided me a build with it, but it wasn't right. Maybe they will ultimately fix it, maybe they won't. We don't know yet. We do know that if it is fixed, it will be fixed only for Office 2013 (problem occurs with all Office applications since they use the same PDF generation code) and thus such a fix won't help you.
Adobe Acrobat Standard and Acrobat Pro both provide an Adobe PDFMaker plug-in to Office applications (including full support for Office 2010) that adds an Acrobat Toolbar as well as a Save as Adobe PDF menu item. The resultant PDF file fully supports embedding of OpenType CFF, TrueType, and Type 1 fonts and in many other ways produces much superior PDF with a full range of PDF generation options not available with the Microsoft PDF. (Note that beginning with Office 2013, Microsoft does not support Type 1 fonts in Office documents at all, even for existing documents!) The Acrobat Office functions are widely used and respected in the end user community and whatever “issues” there are (all software has “issues” of some type - it is a matter of how many and how severe), you should be in much better shape for PDF production that with what you currently are using.
Good luck and let us know if this resolves your problems. (Note that you can download and install a free fully-functional 30 trial of Acrobat Pro to assure that it meets your needs! You can then buy a license and activate what you already have installed.)
- Dov

Changing Substitution Variables - Value takes time to appear in Planning

Hi,
I have an issue with changing substitution variables values. When I do it, Planning takes about 5 minutes to "know" about that change and till then, it continues working with the previous value. Any Idea of how I can solve that?

Hi,
By default, each substitution variable is retrieved and cached from the Essbase server every five minutes or 300 seconds). You can change the retrieval interval by adding the SUBST_VAR_CACHE_LIFETIME property and setting its value in seconds.
To set Planning application or system properties:
1. Select Administration, then Manage Properties.
2. Select:
*Application Properties: set properties for the current application.
* System Properties: set properties for all Planning applications.
3. To:
* Change a property, change its value under Property Value.
*Add a property, click Add. Enter a name (avoid using spaces) and value for the property in the blank row.
If you enter a property already on the tab, its name turns red to indicate it is a duplicate. You can duplicate properties between the application and system tabs.
4. Click Save and confirm your changes.
5. Stop and then restart the application server
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Change file name with oreilly servlet

I am using oreilly servlet package and I want to change the file name to the file I am uploading, is this possible ?
How ?
Thanks.
here I post the servlet code:
package com.reducativa.sitio.servlets;
* DemoParserUploadServlet.java
* Example servlet to handle file uploads using MultipartParser for
* decoding the incoming multipart/form-data stream
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import com.oreilly.servlet.multipart.*;
public class DemoParserUploadServlet extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
PrintWriter out = response.getWriter();
response.setContentType("text/plain");
out.println("Demo Parser Upload Servlet");
File dir = new File("f:/");
if (! dir.isDirectory()) {
throw new ServletException("Supplied uploadDir " + "f:/ " +
" is invalid");
try {
MultipartParser mp = new MultipartParser(request, 10*1024*1024); // 10MB
Part part;
while ((part = mp.readNextPart()) != null) {
String name = part.getName();
if (part.isParam()) {
// it's a parameter part
ParamPart paramPart = (ParamPart) part;
String value = paramPart.getStringValue();
out.println("param; name=" + name + ", value=" + value);
else if (part.isFile()) {
// it's a file part
FilePart filePart = (FilePart) part;
String fileName = filePart.getFileName();
if (fileName != null) {
// the part actually contained a file
long size = filePart.writeTo(dir);
out.println("file; name=" + name + "; filename=" + fileName +
", filePath=" + filePart.getFilePath() +
", content type=" + filePart.getContentType() +
", size=" + size);
else {
// the field did not contain a file
out.println("file; name=" + name + "; EMPTY");
out.flush();
catch (IOException lEx) {
this.getServletContext().log("error reading or saving file");
}

Hi there,
I am facing the same problem that you have stated in your Feb 26, 2002 10:28 AM message regarding "change file name with oreilly servlet", I would like to change the file name to include a unique identifier upon upload, did you ever find a solution to your problem?
Thanks!
Todd
[email protected]

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

How do I change my country with a balance in my account

How do I change my country with a balance in my account

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

Hello Bethanygrace_m7,
Thank you for contacting Apple Support Communities. You can take a look at this article about transferring content from your old iPhone to a new one:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Here is another thread from the Communities about migrating data from an old iPhone to a new one:
Migrating data from old to new iPhone?: Apple Support Communities
https://discussions.apple.com/thread/2038778
Regards,
Jeff D.

Report script - using substitution variable with multiple values

Hi All,
Substitution variable with multiple values is not working correctly with Report scripts. Can you please let me know what is the syntax to assign multiple values to a sub variable using maxl:
alter database samp.samp set variable 'ExtractQuarter' 'Q1,Q2,Q3,Q4';
alter database Samp.Samp set variable 'ExtractQuarter' 'Q1:Q4';
I tried both of the above but they are errored out with the below error:
Error: 1001005 - Unknown Member [Q1:Q4] in Report.
my requirement is different for both Actual and forecast data extract so i would like to make use of this variable to extract whole year data for Forecast and current quarter data for Actual with out duplicating the report scripts for both processes.
Thanks,
PRaveen

Hi,
Please refer following thread,
range of months in report script?
Hope it helps.
Regards

How to change the constant with which you multiplied a column

Hello,
I'm making a spreadsheet with prices in Dollars and then converting them to Euros. Obviously the exchange rate changes all the time, so I was wondering how I could multiply my column A of dollar prices by the current exchange rate to get my column B of Euro prices and then change the prices when the exchange rate changes.
Is it possible to just give the new exchange rate so that my numbers in column B automatically change?
I know I can just always click c1 = b1*1,34 (for example) and then fill down, and then at a later date remove all the prices again and do C1= B1*1,30 and fill down again but I was wondering whether there was an easier way to change the Constant with which you previously multiplied a column.
Thanks for your help, I hope my question was sort of understandable!
I've looked but couldn't find a similar post, sorry if I missed it!
Larissa

LarissaG wrote:
Hi,
This definitely helps! But is a bit inconvenient when you have lots and lots of rowns in Column A.
Oh well! I better get started.
Thank you!
That's because you are thinking about typing formulas into each an every row by hand. That would be horrendously inefficient and people would despise designing spreadsheets if it had to be done that way.
Using Jerry's example as the starting point,
Type the formula =B3*C$1 into cell C3 and hit enter.
Select cell C3
Drag down on the little circle at the bottom right corner of the selection box to complete the column. Alternatively, you can Copy then select the rest of the column and Paste.

When a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

when a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

Sadly, life is sometimes unfair. Although, I'm not certain why you feel you would be entitled to any form of upgrade. It is neither stated nor implied in any Apple literature.

At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

quick test based on screendump from your picture
1: hue & saturation : master sat -100
2:levels : input white=67
OK ?

How can I change from paying with a credit card to using prepaid for itunes

How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918
Apple ID Support - Manage Account
http://www.apple.com/support/appleid/manage/
 Cheers, Tom

Change substitution (GGB1) with FAGLFLEXA

Similar Messages

Maybe you are looking for