Change system text with visual studio

Hello
I'm new to Sharepoint however I learn quickly. I administer multi-lingual website and I'm asked to make some text corrections in system messages that are displayed to users. I was told this can be done by editing .resx file using visual studio?
Can someone explain how to do it? I don't want to change anything manually.
Thanks!

Changing the SharePoint resource files (.resx) is not supported. After a SharePoint update, your modifications can be undone.
There are several other options to change system text:
1) Develop a custom control and load it in the AdditionalPageHead. In the OnPreRender event, locate the other controls you want to change and modify the text
2) Develop a jQuery script that will search the page for the controls and modify the text.
Alain de Klerk
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

Similar Messages

Crystal Report Dll problem with Visual Studio 2005

I am using Crystal Reports with Visual Studio 2005. At one time there were two different version of Crystal Decision Dll in Global Assembly Cache (GAC). So I uninstalled both the versions and then only installed 10.2.3600.
I am facing the following error when building my application in visual studio.
The type 'CrystalDecisions.CrystalReports.Engine.ReportDocument' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\arms website\301a5b02\e03ad7d9\assembly\dl3\c30f5560\00f92427_3857ca01\CrystalDecisions.CrystalReports.Engine.DLL'
and
'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine\10.2.3600.0__692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.dll'
I have only installed it in .Net Framework. For some reason it appears in the temp folder. I cannot delete it and when I renamed it after the next compile it came back again.
I would appreciate any help.

Thanks for the tip.
I installed CR XI R2 with SP2 and 2.1
There are few reports in the system they use to run fine but now when I try to run them I get the following error:
Failed to open the connection. Details: [Database Vendor Code: 4060 ] Failed to open the connection. C:\DOCUME1\SSheikh\LOCALS1\Temp\ZGA370 {71BFCD35-F652-48C8-896D-B93229A4D2C2}.rpt Details: [Database Vendor Code: 4060 ]
I understand that these reports run ok independently and on production machine as well; however when I try to run them from my development machine I get the above error.
I would appreciate help to resolve this. The code of the report is with report developer and I need to know what settings do I need to change where to be able to run the reports. Also I use my machine for deployment of application on the production server.
Thanks.

Associate a dtsx package with Visual Studio

when i double click a dtsx package created via import /export wizard, it opens it in Word. what can i do to get it to open in Visual Studio.?
sukai

Hi sukai,
By default, if we’ve ever used Word program open this .dtsx format file, then it always opens .dtsx file in Word.
If we want to directly open the .dtsx file with Visual Studio, we can change the program. For more detail steps, please see:
Right-click file to select “Open with” option.
Expand “+” next to Other Programs.
Click Browser to navigate to “C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE”, then select devenv.exe application.
Click OK. In this way, the .dtsx file would be always opened with Visual Studio. We can design the package, but cannot execute it.
Besides, as Arthur said, by default, the .dtsx file is opened with SSIS Package Execution Utility (DTEXECUI.EXE Utility). I strongly recommend that we should create a SSIS project, then add the package with “Add existing package” option from File System. At
this time, we can edit, execute and deploy it in SQL Server Data Tools.
Reference:
https://www.blackbaud.com/files/support/guides/infinitydevguide/Subsystems/bbdw-developer-help/content/tkaddpackagefromexisting.htm
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SharePoint Connection not available with Visual Studio 2013

I've installed Visual Studio 2013 in my SharePoint 2010 environment. When I try to add the existing SharePoint Connections I've used in Visual Studio 2010 there is always the same error: Remote SharePoint site connections are not supported. The SharePoint
site is located at the same server, I'm able to access the Central Administration with Visual Studio 2013, but I can't access my development SharePoint Web Application.
I'm sure I do have access to the configuration database, in Visual Studio 2010 I'm able to delete and add SharePoint Connections without any problems. The URL of the development SharePoint connection (like sp1.sharepoint.contoso.com) is not named like
the URL of the Central Administration (like servername:5000). The port of my development SharePoint is 80, but I can't access with servername:80 too. My account is in the group of the local administrators, Visual Studio is started as Administrator
and my account is a SharePoint farm administrator and additionally a site collection administrator of all site collections in my SharePoint web application.
Any idea what's wrong with this SharePoint connections?
Thanks in advance. Georg

Can you try the following workaround and see if it helps? First try adding host entry for your server name and if that works change it to sp1.sharepoint.contoso.com.
SharePoint
2013 Visual Studio Project Error – “Cannot connect to the targeted site”
I understand your situation is different than the one mentioned in the blog but given you seem to have all the permission so may be you try and see if the error is because of above issue. Actually if above does not work (assuming your are on your development
environment), try adding your account to DB Owner on your site collection database as mentioned here.
http://www.sharemuch.com/2010/03/19/resolving-vs-2010-solution-deployment-issues-for-sharepoint-2010-projects/
Amit

What are the requirements in terms of system drive for visual studio 2013

According to this thread "visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2120283-allow-users-to-install-entirely-to-another-hard-dr" it is not possible to install visual studio fully on another drive rather that
the system drive. This link "visualstudio.com/products/visual-studio-professional-with-msdn-vs#Fragment_SystemRequirements" states the system requirement for visual studio pro 2013. However can somebody clarify what is needed in terms of system drive
requirement e.g. out of the 20 gb, how much is needed on the system drive.
Thanks

Hi,
Exact space required will vary widely based on installation components chosen and what you may have already installed on your system.
And When you install your VS in another Drive and run the VS installer, you can see system requirement in installation screen.
Because my work computer only have C Drive, I test the VS2012 professional installation in my home computer E drive. The Screen below:
I think the system requirement can also display when you install VS 2013.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Compile Plug-in with Visual Studio 2010 beta

Hello there,
I know that only Visual Studio 2005 is supported for the Acrobat SDK. But maybe one of you is also experimenting with visual Studio 2010 and got it to work.
I get the following error message. Did anyone solve this problem.
Error    105    error MSB3073: The command "if not "¬roSDKPIDir%"a == ""a if not exist "¬roSDKPIDir%" mkdir "¬roSDKPIDir%"
if not "¬roSDKPIDir%"a == ""a copy "C:\Users\test\Documents\Visual Studio 2010\Projects\EPapers_Button\EPapers_Button\Debug\EPapers_Button.dll" "¬roSDKPIDir%"
if not "¬roSDKPIDir%"a == ""a echo EPapers_Button copied to "¬roSDKPIDir%".
if "¬roSDKPIDir%"a == ""a echo not performed. AcroSDKPIDir environment variable not set.
:VCEnd" exited with code 255.
Thanks for your help.

this is something that i tried i set AcroSDKPIDir to
C:\acrobatxsdk\Adobe\Acrobat 10 SDK\Version 1\PluginSupport\Samples\WeblinkDemo\win32\Debug
and in th e post build events i did the following
<Target Name="PostBuildEvent" Condition="'$(PostBuildEventUseInBuild)'!='false'">
    <Message Text="Description: %(PostBuildEvent.Message)" Condition="'%(PostBuildEvent.Message)' != '' and '$(AcroSDKPIDir)'"/>
    <Exec Command="%(PostBuildEvent.Command)$(BuildSuffix)" Condition="$(AcroSDKPIDir)"/>
</Target>
can u be plzz more specific in terms of it
the error i got is
Error
84
error MSB4100: Expected "$(AcroSDKPIDir)" to evaluate to a boolean instead of "C:\acrobatxsdk\Adobe\Acrobat 10 SDK\Version 1\PluginSupport\Samples\WeblinkDemo\win32\Debug", in condition "'%(PostBuildEvent.Message)' != '' and '$(AcroSDKPIDir)'".
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets
112
61
WeblinkDemo

Using Crystal Reports with Visual Studio 2008

I have bin using visual studio 2008 for a while. I have just started using Crystal Report (which came with Visual studio) . I have an Access database connected with 3 tables, the first two table has two test fields and one index field, the third table has two text fields and two index field (of which one relates too one of the other tables).
I have generated a crystal report on one of the tables using the wizard. I have then placed the crystalreportviewer in a form (as a test). When I run the resulting form, all I get is the column heading label but no fields being displayed. There is data in the table. All I need to know is how do is make sure that the reports are accessing the data in the table, through the datasets???.

Hi,
[Here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375 [original link is broken]] is the specific samples for you or [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9043bbbc-ae66-2b10-ce96-b48f9e25a450]
And [here|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm] is the link for the dev library.
Hope this will work!!
Amit

Connect to oracle database with visual studio 2005

Hi, i have a oracle database called orcl (10.2). I am trying to connect with this database with visual studio 2005. I do this:
In Server Explorer, right click in Data Connection and click in add connection.
I choose oracle database and oracle provider.
In server name I write the name of my computer, and i write the user and pass of the data base (sys or system) but it gives me this error: "ora-12514 listener doesnt know the asket for service in the description one of connection" (translated of Spanish)
what i have to write in server name? host, host:port, LISTENER,.... what?
Thanks

Sometimes, you can check names using from the command line:
$> tnsping <orcl>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 10-ENE-20
06 09:01:04
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=server1)(PORT=1521))
Realizado correctamente (0 mseg)
$>

Troubles with Visual Studio Ultimate 2013

Help, please, to resolve issue with Visual Studio Ultimate 2013:
VS 2013 Ultimate update 2
System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateDesignerProcess(String applicationPath, String clientPort, Uri hostUri, IDictionary environmentVariables, Int32& processId, Object&
processData)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.ProcessIsolationDomain..ctor(ProcessDomainFactory factory, IIsolationBoundary boundary, AppDomainSetup appDomainInfo, FrameworkName targetFramework,
String identifier, String baseDirectory)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.Initialize()
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.CreateInstance[T](Type type)
at Microsoft.Expression.DesignHost.Isolation.IsolatedObjectFactory.Initialize()
at Microsoft.VisualStudio.ExpressionHost.Services.VSIsolationService.CreateObjectFactory(IIsolationTarget isolationTarget, IObjectCatalog catalog)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.CreateLease(IIsolationTarget isolationTarget, CancellationToken cancelToken, DesignerServiceEntry& entry)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.IsolatedDesignerView.CreateDesignerViewInfo(CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.InvokeWithCulture[T](CultureInfo culture, Func`2 func, CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.<>c__DisplayClassa`1.<StartTask>b__6()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
Thanks You!

Hi Jaer,
>>System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
Since this forum is support the English language, so I suggest you can provide me the Exception message by the English.
In addition, I suggest you can provide me more detail message about your issue as the pvdg42's suggestion.
For example:
How did you get the system exception?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Move a Excel 2010 Dokument Addin Project (Visual Studio 2012) to another devleopment machine with Visual Studio 2012 , but Office 2013

Hi
we do have the following situation
on computer A there is a Excel Document Addin development project , Visual Studio 2012, Office 2010 installed. All works fine.
we would like to bring the project to another machine with Visual Studio 2012, but Office 2013 installed.
Visual Studio can not build the project. It says that the application is not installed on the machine (though Excel 2013 is installed , but not Excel 2010) It seems to have a problem with the
vbproj.
In other forums I found a hint that "Hostpackage = ..} needs to be set accordingly in the vbproj. I created then a "empty Excel-Addin project" under Visual Studio , looked at
the Hostpackage entry, put that into the vbproj of "problem project. It still does not work.
It would be great if anyone could help.
Thomas

Hello Eugene
Problem is that it says that projectboard (the name of the main project) can not be loaded. All other projects in the solution can be loaded. Strange thing is , now that I try to create a empty excel Project it says that according to Excel security settings
it can not be generated !?
I opened then Excel and set all Trust Center settings to "Default" - but no effect. I really have no idea what is wrong ..!?
Tom

Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
I am a newbie at development in visual studio. Any help will be highly appreciated.
Thanks,
Rajib

Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
Look in the registry for HKLM\software\business objects and remove the business objects entry.
Download CR 2008 from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

Crystal Report X1 compatibility with Visual Studio 2008

We are migrating an application running on .NET 1.0 to .NET 3.5. Previously Crystal report X1 was working fine with .NET 1.0 however now when it has been migrated to .NET 3.5, we are able to generate crystal report but print and export functionality is not working.
Please confirm if Crystal report X1 is compatible with Visual studio 2008/.NET 3.5? We even updated Release 2 SP4 patch but that didn't solve the problem.
If crystal report X1 is not compatible with Visual studio 2008, which version is compatible so that we can buy the license for the same?

Hello Anurag,
CR XI R1 is not supported for VS 2008.
but for
u2022 Visual Studio .NET 2002
u2022 Visual Studio .NET 2003
CR XI R2
u2022 Visual Studio .NET 2002
u2022 Visual Studio .NET 2003
u2022 Visual Studio .NET 2005
CR XI R3
u2022 Visual Studio 2003
u2022 Visual Studio 2005
CR XI R3 Service Pack 1
Microsoft .NET Framework
u2022 .NET 1.1
u2022 .NET 2.0
u2022 .NET 3.0
u2022 .NET 3.5
Development Platforms
u2022 Visual Studio 2003
u2022 Visual Studio 2005
u2022 Visual Studio 2008
Hope this helps
Falk

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

Create plug-in for Adobe with Visual Studio 2008

Hi to all, I'm Italian excuse for my english,
I see Adobe SDK Help, but I don't see something for built a plug-in with Visual Studio 2008, I see only built with Visual Studio 2005!
my asks is : Because ? Can I create a plug-in with Visual Studio 2008? if yes WHAT did it?
thanks

Post your question in the 'Acrobat Developers SDK' forum.

Change system text with visual studio

Similar Messages

Maybe you are looking for