Change Tab Description

Dear Friend,
I add one Customize Tab in Purchase order using user exit on item level but the name (Description) of that tab its showing 'Customer Data' . that description how we can change ?.
Thanks in advance.

Hi,
what user exit/BADI have you used? If you used BADI ME_GUI_PO_CUST then you can define tab text in method subscribe. Take a look at sample code in SE18 for this BADI.
Cheers

Similar Messages

How to change the description in CV03(N) transaction ?

How to chnage the long test description in CV03N transaction
Posted: Jan 10, 2010 11:36 PM     Edit          Reply
Hi Friends,
I have a requirement as below:
1. Excecute the transaction CV04N
2. Give Document value(s) and Excecute
3. Double click on any row on the ALV generated which takes you to CV03N transaction
4. Here in the additional data Tab, I need to concatenate Subject1,Subject3,Subject3 values and this value need to be put Description in the Document data Tab.
Ex:
If Subject1 = Test1, Subject2 = Test2 and Subject3 = Test3 then i have to change the description as Test1
Test2 Test3 When the change followed by save is clicked.
Please drop your suitable answers ASAP.
Below is the code i have used using the BADI 'DOCUMENT_MAIN01' and the method 'AFTER_SAVE'.
Below is the code :
TYPES:
    BEGIN OF ty_ausp,
      objek TYPE ausp-objek,        "Key of object to be classified
      atinn TYPE ausp-atinn,        "Internal characteristic
      atwrt TYPE ausp-atwrt,        "Characteristic Value
    END OF ty_ausp.
DATA:
    w_objek      TYPE ausp-objek,
    w_ltext(120) TYPE c,
    w_name       TYPE thead-tdname,        "Name
    wa_drat      TYPE drat,
    wa_ausp      TYPE ty_ausp,
    wa_tline     TYPE tline,
    wa_draw      TYPE draw,
    t_ausp       TYPE STANDARD TABLE OF ty_ausp,
    wa_thead      TYPE thead,              "SAPscript: Text Header
    t_tline      TYPE STANDARD TABLE OF tline.
CLEAR w_objek.
w_objek+0(3) = draw-dokar.
w_objek+3(25) = draw-doknr.
w_objek+28(2) = draw-dokvr.
w_objek+30(3) = draw-doktl.
SELECT objek                         " Key of object to be classified
         atinn                         " Internal characteristic
         atwrt                         " Characteristic Value
    INTO TABLE t_ausp
    FROM ausp
   WHERE objek = w_objek
     AND atinn IN ('0000000858', '0000001038', '0000001039' ).
IF sy-subrc = 0.
    SORT t_ausp BY objek atinn.
ENDIF.                               " IF sy-subrc = 0.
LOOP AT t_ausp INTO wa_ausp.
    CONCATENATE w_ltext wa_ausp-atwrt INTO w_ltext SEPARATED BY space.
ENDLOOP.                             " LOOP AT t_ausp INTO wa_ausp.
CLEAR w_name.
MOVE draw TO wa_draw.
w_name+0(3) = wa_draw-mandt.
w_name+3(3) = wa_draw-dokar.
w_name+6(25) = wa_draw-doknr.
w_name+31(2) = wa_draw-dokvr.
w_name+33(3) = wa_draw-doktl.
REFRESH t_tline.
CALL FUNCTION 'DELETE_TEXT'
    EXPORTING
    CLIENT                = SY-MANDT
      id                    = 'LTXT'
      language              = 'E'
      name                  = w_name
      object                = 'DRAT'
    savemode_direct        = ' '
    textmemory_only        = ' '
    local_cat              = ' '
   EXCEPTIONS
     not_found              = 1
     OTHERS                 = 2.
IF sy-subrc <> 0.                    "IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.                               "IF sy-subrc <> 0.
wa_tline-tdformat = '='.
wa_tline-tdline = w_ltext.
APPEND wa_tline TO t_tline.
wa_thead-tdobject = 'DRAT'.
wa_thead-tdname = w_name.
wa_thead-tdid = 'LTXT'.
wa_thead-tdspras = 'E'.
wa_thead-tdtitle = w_ltext.
DATA:
    w_function TYPE c,
    wa_newheader TYPE thead.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
     CLIENT                = SY-MANDT
      header                = wa_thead
      insert                = ' '
     SAVEMODE_DIRECT        = 'V'
    OWNER_SPECIFIED       = ' '
    LOCAL_CAT             = ' '
   IMPORTING
     function              = w_function
     newheader             = wa_newheader
    TABLES
      lines                 = t_tline
   EXCEPTIONS
      id                    = 1
      language              = 2
      name                  = 3
      object                = 4
      OTHERS                = 5.
IF sy-subrc <> 0.                    "IF sy-subrc <> 0.
Raise message
ENDIF.
REFRESH t_tline[].
CLEAR wa_thead.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT                        = SY-MANDT
      id                    = 'LTXT'
      language              = 'E'
      name                  = w_name
      object                = 'DRAT'
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
   IMPORTING
     header                        = wa_thead
    TABLES
      lines                         = t_tline
   EXCEPTIONS
     id                            = 1
     language                      = 2
     name                          = 3
     not_found                     = 4
     object                        = 5
     reference_check               = 6
     wrong_access_to_archive       = 7
     OTHERS                        = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please help why it is not getting effeted OR
Give a differnt way of Solving this issue.
Please drop your suitable answers ASAP.
Regards,
Rama.P

Hi Claud,
Go to SPROSRM ServerCross App Basic SettingsNumber rangesDefine transaction typesSelect BUS2200 and double click on transaction typesHere you will see BID (transaction type)--Just double click on this and in the screen that follows change the description.
PS: The system will generate a transport request.
Regards,
Nikhil

Change the description of the product attributes

Hi,
I want to change the description of the product attributes from 1 - 6(Check Box) in MM02 in the SALES : Sales Org 2 Tab.
How to do this.
Kindly let me know.
Regards
Manoj

Hi dude,
You can try Text Enhancements for ur Data Element in CMOD.
Tcode CMOD, Goto>text enhancements>Data Elements-->NewDEcust Doc.
Regards
Srikanth M

Change Item Description in Purchase Requisition

Hi,
Purchase requisition is created automatically from the maintenance order in IW31.
Here the requirement is to change the item description (Short Text) in the purchase requisition.
In ME52N when I tried to manually change, the item text is greyed out.If at all we have to change the item description what is the procedure.
Please suggest.
Regards
Kishore

Hi,
You cant change this Text in ME52N, for this you need to change the description of operation in IW32. PR take default text form IW32 component tab page so you can change this text same will reflected to you PR.
Regards,
Ashish

Changing tab page name

In the web client, How do you go about changing tab page names. For instance, the tab page default on complaints transaction has a heading called technical analysis. I want to change it to just analysis. I looked in the tab groups I see the event with the tab name, however, it can't be modified there? can someone enlighten me on where this modification can be made?

Amory, in order to change the actual name of the tab (read: event), every tab is associated with an event, lookup Tab Group, CPL_ODC1, here you see a View Swith Group assigned 'S10_HD_ANA'. When you lookup this View Swith Group, you see the description 'Technical Analysis'. Copy both this entry and replace it's description accordingly. Then copy the tab group and refer to the newly created View Switch Group. After this create an entry in the BAB tables for your application for the event S10_HD_TREE_ANALYSIS and refer also to you newly created tab group. Hope this helpes, Tiest.

Change the description of workflow/task

Hi Workflow experts,
I am working on CATS workflow, where the requirement is to change the description of task. As in my case, as the workflow comes into the inbox of supervisor, the description it shows should contain the short-text which is maintained in CATSDB table for the respective entry. Is there any FM to change that. It is not displaying the vriable, which i am passing through binding from workflow to TASK.

Hi Santoshi,
I have a workflow, i have a task and rule and methods associated with that also. CATS workflow is created by me according to the requirement. Now a new requirement has come up where i have to display the value of CATSDB-LTXA1 also.
In task, there is a tab of task description. Here we write text which gets displayed when a workflow comes to the inbox. Along with the hard-coded text, i need to display value of CATSDB-LTXA1. I am paasing this variable through the event container to the task container (in triggering event tab of task). & i am giving it in task's description tab. But it is not getting displayed when the workflow comes to the inbox.
Please let me know if there is any FM to change the text of Task's description dynamically. I will use that in the method.

Change tab strip name for ME52N transaction

All,
I am trying to change the TabStrip title from "Customer Data" to a custom title in Item Tabstrip in ME52N transction. I have implemented screen exit using the customer exit "MEREQ001". But I dont find a way to update the TabStrip Title.
SE51 doesnt work because it is a SAP standard code.
Does anyone know how to go about acheiving the above? Responses will be greatly appreciated.
Thanks.

If you use your own data fields, you can find these on the tab page "Customer data" in the screen area "Item details". You can change the description on the tab page to fit your requirements You have to create text symbol 111 (Item) in program SAPLXM02 to do this.
PS:pay attention to the language of the text.
Edited by: Lei Guo on Sep 6, 2010 10:58 AM

Change of description in standard task TS 10407929

How to change the description for standard task TS 10407929 in T code pftc_chg, it says, to maintain the object TS 10407929 in its original language Deutsch.

hi George,
use the TX pftc, select the task 10407929 and view (not change).
Basic Data Tab you will have a button "redefine work item text"
As far as I know this should work also in english language

How Can I add/change text/description in accounting view of Vendor master ?

/nxk02 --> (give vendor, company code )
then check the check box of 'Accounting info' under Company code data block --> then hit 'Enter'
--> it goes to next screen. Then in this screen, click menu 'Extras' --> then press "Texts" under that menu.
So that popup screen appears with the Description.
I need to know from where these descriptions are coming or where these descption can be maintained ? Because I need to add/change these descriptions to my vendors
YOUR HELP IS HIGHLTY APPRECIATED. Please help....
THANKS IN ADVANCE.

Hi Aman,
Because these texts are maintained at Company Code level for the Vendor, they are part of the Accounts Payable configuration in the SAP IMG.
SPRO > Financial Accounting > Accounts Receivable and Accounts Payable > Vendor Accounts > Master Data > Preparations for Creating Vendor Master Data > Define Text IDs for Accounting Texts (Vendors)
Transaction OBT5
Regards,
Monika

Change material description in MM02

Hi,
System is allowing to change the material description in MM02 from any views.
Requirement is once the material code save, system should allow to change the description of product to user who have authorisation for Basic data 1 and 2 not other views.
Like I am giving Accounting view authorisation to one person, he should not able to change the product description.
Is it possibel and how?
Thanks,
Samir Bhatt

Hi,
Description is part of MARA table. If you give full authorization for General data fields to the persons that maintain basic 1 & 2 and does not give this authorization to the persons that are not allowed to change the description, you will achieve what you want. This will allow the financial people to see the general data fields but they will not be able to change them.
Regards,
MdZ

Is it possible to change the description of an attribute in the local view

I have a characteristic in a query which has multiple attributes. In the global view I am able to change the descriptions on the attributes. But the local view does not show the updated descriptions - it shows the descriptions from the multiprovider? Any way I can match up the local and global view for the attribute descriptions ?

Hello,
Just close and open ur analyzer. Problem is that it is not getting refresh

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Change the description of the line in the EMOLUMENTS PAID in the FORM16

Hello Seniors,
A small issue regarding the change the name of the FIXED DA to DEARNESS ALLOWANCE in the EMOLUMENTS PAID in the FORM16.
my client asked me to change the description of the DA.
how can i change this, programm HINCF160 is SAP STANDARD it is not changeable.
please help me regarding this.
thanks & regards,
praneeth kumar

Hi Praneeth,
Even i m trying the same at my company, but it is without ESS...so doing RND on tht... Just check this link out...it may be helpful for you...also i dnt found ur E-mail ID in ur Business card...
http://help.sap.com/saphelp_46c/helpdata/EN/53/6e693fa14411d19d450000e8215202/frameset.htm
Regards,
Prasad Lad

Change the description of the change request number" in SE10 after release

Hi All
Is there way to change the
"description of the change request number" in SE10
after releasing the change request number?
appreciate your feedback
Thanks you
Iver

Hello
I do not know a way to do it in se10 but a simple program could do the trick.
Include the following code in your program.
update e07t set as4text = 'your new description'
where trkorr = your_cr and langu = 'E'.
Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
Regards
Greg Kern.

Changing the description of the created referenced Char. in COPA(Urgent!!!)

Hi Gurus,
Can we change the description of the created referenced characteristics in the COPA.
Thank You.
Points will be rewarded for sure.

Hi!
Since, the description is in the display mode, while being in editing mode, can't be able to change it.
Is there any way out to change it.
Thank You.
Ravi

Change Tab Description

Similar Messages

Maybe you are looking for