Change tab (indentation) length in Notes

In line with Apple's recent decisions to take control away from users, Notes has no way to add to default fonts or change the tab length.  I found a hack to add to the font choices - http://hints.macworld.com/article.php?story=20120811055524908.  I can now choose a nice fixed width font. 
However the tab length is still an issue, it seems to be a ridicously long 8 characters.  Anyone find a fix for this? 

It probably isn't a permanent fix, but the Format Menu has an increase/decrease command.

Similar Messages

  • Logic is changing the original length of notes.  Please help.

    When I play may song, every note, in every midi track sounds shorter than originally recorded. All notes even the full notes are reduced to about 8th, however, the notation remains unchanged. What can be the problem? I tried to freeze the tracks but it did not help. What-else can I do? Is my system somehow overloaded?
    Anya

    And in addition to El Schwartzter's excellent advice, and to stop it happening on further MIDI recordings, deselect all regions and check the parameter box - this is the "MIDI Thru" parameters - any settings you apply here will automatically apply to all recorded regions (it's a quick way to for example always have 1/16th note quantisation).
    Make sure all your MIDI Thru parameters are set to sensible defaults or inactive.

  • Indent Lengths Between Pages for Mac and iOS

    I've been using Pages on my iPad a lot for classes. During lectures, I type outlines in a blank document and quickly switch between headings and subheadings with the "indent increase" and "indent decrease" buttons in the toolbar (looking at the ruler, it seems like the default indent length is a little more than half an inch - maybe 1.5cm?).
    The problem is that when I later open the document via iCloud in Pages on my iMac, the indent lengths become readjusted so that each indentation takes up 1.8 inches (so 3.6 inches for a double indent, 5.4 for a triple, etc.). Short of highlighting each line and manually changing the indent length in the inspector, I haven't found a way to fix this change. Further, if I make any other changes to the document in Mac Pages, that 1.8 inch indent length carries over to iOS Pages. When I then try to open the document in iOS, I get:
    "This document may look different on your iOS device than on your Mac. Use Open Copy if you want to preserve the original." [Open Copy] [Open]
    Not wanting a duplicate, I'll choose [Open], and I found I could quickly restore the 1.5cm length by selecting all text, going to list settings and selecting "None" (as opposed to "Bullet," "Image,' etc.). But the next time I try to open the document in Mac Pages, the cycle repeats.
    Am I missing some obvious way of keeping these indents consistent across devices, or do I just need to deal with this reformatting each time?
    (newest versions of desktop/mobile Pages are running on Mountain Lion and iOS 6)

    Nobody here can tell you why Apple does things the way it does them, but you can tell Apple how you would like things to work at
    http://www.apple.com/feedback

  • Not able to use the Tab key to Tab indent when within a text edit window...

    Two questions please... First one is above for the tab function. In Safari I just need to press control+option+tab to indent a tab within a text edit box on a website. This function is being used more via cloud and mobile capability.
    Second... I can, in Safari, Copy and paste a site with tables. Works great in Safari. When I try to do this in FF I lose the formatting of the tables and it just give plain text without the tabled fields.
    I would love to use FF because the compatibility if much greater than Safari, but... I need my functionality as well to do my work to the best and quickest ability.
    Thank you

    Help About says I'm on 20.0.1
    Up until last week, I was able to use the tab key when typing emails and other multi-line text boxes.
    Suddenly the behavior of the tab key changed. This isn't the first time. It's been quite a while ago that the function of the tab key changed from indenting to moving around the page, then after some time it changed back to indenting.
    Can we get this fixed and leave it alone, please?
    I may give one of those add-ins a try, but my problem with add-ins is that they break when FF is patched or upgraded, then I'm left with out the solution they provide.
    Can we just fix Firefox, please?
    Thanks,
    Frank
    P.S. Another potential fix I came across suggested starting FF in safe mode to see if the problem goes away. It does not. It seems to be a change to FF that appeared after an update last week. On or just befor 24 Apr.

  • You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

    You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

    You can use the Menu Editor add-on to rearrange or remove menu items - https://addons.mozilla.org/firefox/addon/menu-editor

  • Content-Length header not changed after url-rewrite... yields cut page.

    We use iPlanet6 ,service pack 4. The pages that return from the servlets are
    changed by the Application Server. The Application Server adds
    GXHC_GX_jst=901a10a6662d6164& to the all the URLs (which increase the
    page's size). The problem is that Application Server does not change the
    Content-Length header in the servlet response. This yields cut pages in the
    browser (IExplorer5).
    If we don't add the Content-Length header it works fine. (I.e., The pages
    are not cut.) Our problem is that we work with mobile devices that must have
    the Content-Length header to work properly.
    Q: Do you know if there is a patch that fix the problem?
    Q: Is it possible to configure the Application Server to prevent this
    url-rewrite?
    Regards,
              Aviram

    Hi guys,
    I would like to do url rewriting on our CF app but am worried I'll break something if I try and do it myself - is there anyone who would be interested in a bit of consultancy to help us achieve this?
    I want to turn http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
    into http://www.allchichesterjobs.com/part-time-jobs
    I've tried this using IIS and URL Rewrite, when I browsed to http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
    my browser was redirected to http://www.allchichesterjobs.com/part-time-jobs ok - but then I got a 404 error
    I'm wondering if I can pay someone to remote view my screen while we talk on skype and tell me what to do?
    Hope it's ok to post this sort of request on here
    Thanks very much indeed.
    Nick

  • I cannot use the scroll, cannot change tabs, autocomplete for the URLs does not work

    cannot use scroll, cannot change tabs, cannot use autocomplete in the URL tab. this was working
    == This happened ==
    A few times a week

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Replace tab indents with em space indents?

    Hi all!
    I'm laying out a book whose chapters were all initially created in Word using Tab indents. I tried to do a find and replace within InDesign to change the tab indents to em spaces, but both Word and Indesign don't register the tab spaces as highlight-able, so the find and replace found nothing when I looked for "^t".
    Anyone know how to do this?
    Thank you!
    Alec

    So, they're not tabs. Check the Paragraph settings for one of them -- I bet you find a First Line Indent of other than 0.
    If Word behaved itself, and the document was imported nicely, you might find all indented paragraphs have the same paragraph style applied to them. If so, just change the value for the First Line Indent in that paragraph style, and you're done.
    If not, you have something to do to-night! Unfortunately, although InDesign
    i can
    search for a specific indent value and replace it with another, it's impossibly hard to get the correct value to search for. That's due to rounding in the input boxes -- a value you see as "12.5pt" might be internally stored as "12.4999pt", so if you search for "12.5" it doesn't find anything. No point fiddling about; create a new paragraph style (this time with a good indent value), and apply it manually to the ones you want changed.
    Incidentally, you can't specify measurements in InDesign in em units. For a 1 em indent I generally choose either the text point size, or the leading -- this tends to look better if the leading is way big. If neither looks okay, I make up something that
    i does.

  • Is there a way to automatically change tabs with different times set for each tab?

    I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
    Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
    John

    Currently Firefox don't have any options like that.
    You can ask the Addon developers
    *http://addons.mozilla.org/

  • How to restrict the user to change the project structure but not the documents?

    Hi,
    I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
    http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
    I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way  to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
    Thanks,
    Rutvik Uapdhyay. 

    Hi Rutvik,
    Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
    role  - SAP_SOLAR01_ALL
    this take care of objects in Solar01 like tab access etc
    role -SAP_SOL_KW_ALL
    this takes care of entire documentation within solman
    hope this helps
    Regards
    Prakhar

  • Pages 5.2 How do I change the indent level used by the indent icon in the toolbar?

    I'd like to use the INDENT and OUTDENT icons in the Pages (5.2) toolbar.   They seem to default to 0.5 inches.   I would to change that but I cant' figure it out.
    I can accomplish what I want by going to "Style / Bullets & Lists / None / Indent - text.   I make that the inches I prefer - such as 0.25 etc.
    Is there a way to change the indent spacing used by the Indent (and Outdent) icons in the Toolbar?
    Thanks
    Rick Conklin
    Wichita, KS

    Mr. VikingOS
    Sorry, the above instruction changes the "first line" indent.   You can confirm this by going to "format / indents / first."
    That's not the same as the paragraph indent - which is what the Indent icons do.
    I just want a way to alter the distance used by those icons.
    Anybody else?
    Bueller?   Bueller?

  • The settings on the tab for "delegate" was not properly stored.

    Hello group,
    I try to write it in english - but it is a try only *g
    Since last week I can´t set or delete any user or groups from the delegate tab.
    Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
    I´ve try to move the users to the IT OU but the problem is the same.
    New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it. 
    Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
    korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
    Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
    I´ve translate the error message with google language tools.
    The settings on the tab for "delegate" was not
    properly stored. List to send in the order can or can not activated will.
    You do not have the required permissions to perform this operation with this object.
    Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
    Thx for any help!!
    Kind Regards
    Denis Ecklerhttp://www.ewig-drohendes-versagen.de
    ICE 2009 I´ll be there -> http://www.ice-lingen.de/

    Hi Denis,
    At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
    Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
    I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
    Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
    The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
    After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
    At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
    DSACLS “distinguished name of the user object” >acls.txt
    Thanks,
    Mike

  • How to see the Tabs in Aurora( windows 8 app ) ? I only can see them by oppening a new tab. But In case I want to change tab I can't see them.

    I Install Firefox Aurora as it support windows 8 style app. But In the windows 8 mode , the tab are hidden which I think is a good style. But I cant see any option to see them when I want. I just can see them when I open a new window. And select the option "open in the new window", it just show the tab bar which is not like the original version of Firefox. And also the search engine here is bing.com . How to change it.

    Where did you see Aurora as a Windows 8 application?
    Aurora is not the name of a version but one of the four main development channels. They are Release (26.0), Beta (27.0b9 currently), Aurora (28.0a2) and Nightly (29.0a1). When Firefox 27.0 is released on Feb 4 the versions will move/merge to next channel around time also.
    Aurora is not meant for regular use as Aurora and Nightly gets checkins almost everyday and they get a update each of those days.
    Also there is a good chance that the Australis that many people dislike will move with 29.0 from Nightly to the Aurora channel next week.
    Edit:
    Hmm you may have seen older articles like https://blog.mozilla.org/futurereleases/2013/09/21/help-test-a-preview-of-firefox-optimized-for-windows-8-tablets/
    At the time of that article, version Firefox 26.0 was being developed early on the Aurora channel.

  • Beat Mapping is changing speed of audio region, not the metronome!!!

    Hi Everyone,
    I just today learned about beat mapping in Logic. I used it on one song that i'd recorded previously without a click track and it worked like a charm. I'm trying to use it on a different song now (same situation: previously recorded with no click) but for some reason with this song, it's changing the speed/length of my audio region to match the metronome instead of changing the speed of the metronome to match the speed of the audio. What's going on?!
    Thanks a bunch.
    David
    MacBook   Mac OS X (10.4.9)   2.0 GHz Processor, 2 GB RAM

    Well after many hours of searching through Logic Forums and flipping through the Logic Reference Manual, all to no avail, I've finally figured out what the problem was. I needed to uncheck the "Follow Te(mpo)" option in the Region Parameter Box for the region I was trying to beat map. The beat mapping process wasn't actually changing the length/speed of my audio region like I said it was in my initial post; it was simply playing over it slower or faster in order to preserve the audio-to-tempo ratio as I made the tempo slower or faster. All I needed to do was uncheck that little box and now beat mapping works exactly as described in the Reference Manual. WHY ON EARTH is the "Follow Te(mpo)" box not mentioned when discussing beat mapping?! More importantly, why is it not mentioned ANYWHERE in the entire Reference Manual?!?!? NOT ONCE!!! unbelievably frustrating.
    MacBook   Mac OS X (10.4.9)   2.0 GHz Processor, 2 GB RAM

  • How to change the field length in standard sap program.

    Hi All,
    How to change the field length in standard sap program.
    Urgent
    Example:
    Text1 type c length 75,
    To change :
    Text1 type c length 150,
    Point will be rewarded..
    Thank you,
    Vikram.C

    If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
    Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
    regards, Rob

Maybe you are looking for