Change Technical Name of Info Provider

Hi Experts,
I am in a situation where I have to change the technical name of the DSO. Is it possible? If so, please tell me how to do it.
With Kind Regards,
Kannan

Hi Kannan,
No, you cannot change the technical name of DSO, only the description can be changed.
If your DSO is a new one and the data is not yet loaded. Just delete it and create a new one. But if it is an old one and data is loaded, then you have to backup that data , delete the old DSO and create a new one (You may also create a copy of DSO). Make sure the update rules/Transformation related to your DSO are also checked because it will create issues if your DSO is a source for other targets.
Hope this helps
Regards
Sai

Similar Messages

  • Change Technical name of the Cube.

    Hi All,
    Is there a way we can chnage the Technical Name of The Cube.
    Thanks
    Umang

    Hello Umang,
    It is not possible to change the technical name of a Cube. There are too many complexities.
    You could create a new cube with the same structure using the 'copy from ' function while creating it and give it the desired name..
    If it helps, provide points.
    Regards,
    Ashok Saha

  • Change Technical Name

    Hi Gurus,
    Any way to change the technical name of a RKF or a CKF?
    When I right click on the context menu of any RKF and open the Edit/Properties, I do not see the Tech name editable.
    Any chance?
    Manesh.

    Hello Manesh,
    You can change the technical name of CKF and RKF from the table: RSZELTDIR & RSZCOMPDIR
    In the table RSZCOMPDIR, Change COMPID (Technical name of Query elements will be stored here)
    and also do make changes in the table RSZELTDIR
    In the selection of table use RSZELTDIR - DEFTP = CKF/SET
    then RSZELDIR - MAPNAME represents the calculated keyfigure or restricted keyfigure.
    Changing the value of MAPNAME will change the technical name.
    I hope this information helps.
    Regards,
    NK.A
    Dont forget to assign points if useful.

  • Change technical name of queries and views

    Hi everybody,
    I need to copy a query with its query views. The problem is that I want to give a new name for each query and each view. And the views will belong to the new query.
    Is that possible, or should I copy the query and define the views again?

    let say u r in query designer.
    than hit the menu tab and select the first tab i.e. QUERY.
    now in that choose the option SAVE AS.
    it willask you for new name and new technical name.
    (the query will still be saved in ur multiprovider.)
    for views u have to define new views for ur new query

  • Contact changes and names/pics/info not matching

    My contact information has recently changed.
    A number of my contacts now have the incorrect facebook picture, or the incorrect name attached to their email addresses.
    The problem extends to email and text messaging but I haven't checked the phone yet.
    Any suggestions?  Its embarrassing to text your boss in error.
    Thanks

    I understand you mate very well! It's a problem have you restored from a backup recently?

  • How to change Query Description/Technical name of a query

    <i><b>Hi</b></i> I have couple of questions with Query name changing.
    <b>1)Is it possible to change the Technical name of a query?
    If Yes how?
    2)I could change the description of a query but when the same query is saved in a role how to change its description?</b>
    <i><b>Thanks
    Ajay</b></i>

    hi,
    open your query in query designer and use button 'save as' then you can change name description.
    Remember that when you change technical name it will be completely new query and you will have to add it to your role.
    Regards,
    Andrzej

  • How to find the technical name

    Hai,
    How to find the technical name of a data source for General Ledger: Balances – Period Breakdown
    Thanks

    Hai
    my question is in General Ledger: Balances – Period Breakdown
    the link is showing General Ledger : Balances , Leadingledger
    I got this link in queries for General Ledger: Balances – Period Breakdown
    http://help.sap.com/saphelp_nw70/helpdata/en/2d/955a73da4d6d41a0a6128caf274ce8/frameset.htm
    But here technical name of info cube is given.But i dont know how to find the technical name of the data source.This might be simple question i think but i am new to SAP
    Thanks

  • Changing role names

    Hi,
    I'm running BW 3.0B- i want to change some of my existing role names - I know it can be done by copying the role and giving the new copied role a new name but i don't want to do it this way.
    Regards,
    Moshe

    You can change the role description but you can't change technical name of the role, technical name is the identifier of the role

  • How to find the activity of the Info cubes or any other Info Provider

    Hello everyone,
    Is there anyway to find out the last activity date of the info cube or any other info provider?
    One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
    So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
    I also need the Procedure to know the activity of the queries also?
    Hope to get an answer soon..!
    Thanks in advance..!
    Deepak

    Hi,
    Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
    If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
    If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
    I hoep it will help.
    Thanks,
    S

  • Any option to change the technical name of the info sources?

    Hi,
    Is there any option to change the technical name of the infor sources?

    Hi,
    You cannot change the technical name of infosource. You can go for Save as option and save it with different techincal name as required.
    Regards
    Akhan

  • Can i change the Technical Name of A Cube

    Hi friends,
    I have created a n Info Cube with the name ZXXTB02 follwed by the creation of Transformation and DTP . But Latter i found that I violated the naming convention,
    So can i change the name of my Info cube to Z1XXTB02 or I have to create a new Infocube ...
    Regards
    Anurag

    Hi Anurag,
    Unless you can do some modification at the table level, you cannot change the technical name of the cube, so may be better to copy this as a new cube and give the desired technical name.
    Hope this helps...

  • BPC 10.0 NW - Change technical cube name during transport

    Hej gurus,
    One of our users have run a full optimization, and therefore the technical names of the cubes in DEV and PRD are no longer the same.
    We have looked at the SAP notes, and found the following.
    1689814 – “Stabilize InfoCube's technical name in the modeling process”
    We have made sure the note is on both DEV and PRD, and we have enabled "ENABLE_FIXED_CUBENAME" on all models. By doing this the notes states that:  "If the InfoCube technical names of the model are different between source and target system, the technical name of the InfoCube on target system would be changed to the same as the technical name of the InfoCube on source system."
    When I run the transport, the transport is succesfull, but the technical name has not changed.
    Therfore, I would like to know, if anybody have tried using this note and successfully changed the technical name? If yes, what did you exactly do? Did you transport everything for making it work? clear the database?
    I hope somebody can help us.
    Best regards,
    Mikkel Kristensen

    Hi Mikkel,
    Did you have any luck with this?  The only time I had any luck was changing the target structure (adding a dimension in the target), when the transport went through it changed the structure and reset the technical name to the source name.  It doesn't appear to work if the technical name is not due to be reset.
    Best,
    Chris

  • In the info cube insted of description need to display technical name

    Hi,
    I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
    thanks
    Raj

    Hi Raj,
    Use T code : LISTCUBE
    you get 2 text boxes,  Object type : CUBE
                                     Data Target : cube name
    Check the option - Technical names.  F8
    You get all the technical names in the place of descriptions,
    hope this is fine
    Regards
    sreekanth

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

    A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name.  So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
    Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it.  I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out.  Also tried right clicking and selecting Edit, but same problem.
    Would removing all instances of where the figure is used in the query and other queries allow me to change it?  Could it be a user rights issue?
    As always, thanks for the help!

    Hi,
    After creating a RKF , you cannot change its technical name.
    If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
    you can create a copy of the same through transaction RSZC.
    In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
    select restricted keyfigure ,click on execute ,  in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
    and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
    Replace the same with your Old keyfigure in report.

Maybe you are looking for

  • Printer unrecognized

    Hi everyone. I'm hoping to find some help. I have a Brother HL-2140 laser printer that I've been using without trouble for over a year. Just a couple of hours ago I went to print something, and suddenly the printer queue said that the printer was not

  • External HDD via eSATA or internal HDD - which is fastest?

    I am thinking of putting a fifth HDD in the optical bay of my mac pro. It looks a little bit fiddly to install (brackets, routing cables etc). I also have a Sonnet Tempo E4P SATA card. Is aan external HDD connected vis eSATA as fast as an internal dr

  • Firewire External Enclosure very hot.

    I am wondering if anyone else has a Serial ATA Seagate 200gb 7200rpm hard drive in a Firewire 800 external enclosure. Mine runs very hot in comparison to my IDE hard drives in the same OWC brand Firewire 800 enclosures. If this is abnormal I would li

  • Delayed/Slow Boot to DT, Program Delay

    Greetings, fellow Archers: I've been trying to find a solution to an inconvenience I've been having, and have so far been unable to come to a resolution.  My computer has been showing a delay/lag in going from cold to fully loaded Openbox ever since

  • How to enter values for newly inserted field for maintenace view table

    Hi , I have inserted new field for custom table which consits of maintance view.. I want to put some values in to this newly inserted field.. When i try to insert values bu useing se16,iam unable to view this newely inserted field.. Can you please le