Change technical name of queries and views

Hi everybody,
I need to copy a query with its query views. The problem is that I want to give a new name for each query and each view. And the views will belong to the new query.
Is that possible, or should I copy the query and define the views again?

let say u r in query designer.
than hit the menu tab and select the first tab i.e. QUERY.
now in that choose the option SAVE AS.
it willask you for new name and new technical name.
(the query will still be saved in ur multiprovider.)
for views u have to define new views for ur new query

Similar Messages

  • How can I change the name of a Materialized View?

    How can I change the name of a Materialized View?

    Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP and Data Mining options
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.3.0 - Production

  • Change Technical Name

    Hi Gurus,
    Any way to change the technical name of a RKF or a CKF?
    When I right click on the context menu of any RKF and open the Edit/Properties, I do not see the Tech name editable.
    Any chance?
    Manesh.

    Hello Manesh,
    You can change the technical name of CKF and RKF from the table: RSZELTDIR & RSZCOMPDIR
    In the table RSZCOMPDIR, Change COMPID (Technical name of Query elements will be stored here)
    and also do make changes in the table RSZELTDIR
    In the selection of table use RSZELTDIR - DEFTP = CKF/SET
    then RSZELDIR - MAPNAME represents the calculated keyfigure or restricted keyfigure.
    Changing the value of MAPNAME will change the technical name.
    I hope this information helps.
    Regards,
    NK.A
    Dont forget to assign points if useful.

  • How to change the name / IP address and domain name for BOE Server

    Hello,
    We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
    I need your help
    thank you

    If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
    Regards,
    Tim

  • IWeb: changing the slideshow image scale and viewing time

    I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems.  While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed.  I thought this was odd and I wondered if anyone else has observed the same thing?  It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value.  Comments?  [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list.  Sounds like I need to change web authoring software.]

    Why do you think it's a bug?
    Anyway :
    Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
    I use my own show :
    http://home.wyodor.net/photo/

  • Change the name "history", "back" and "forward" of the top-menu

    hello,
    how can I change the name "history", "back" and "forward" of the top-menu in another language??
    Thank you for every response.
    Regards,
    Sergio

    Sergio,
    I suggest opening OSS message with SAP on the issue.
    Translation for "history", "back" and "forward" of the top-menu to Romanian should be delivered with EP.
    If it was not done and SAP delivered partially translated content, SAP tech support should provide you with
    the solution. If you find it, please post to forum for the benefit of other people.
    Regards,
    Slava

  • Change Technical name of the Cube.

    Hi All,
    Is there a way we can chnage the Technical Name of The Cube.
    Thanks
    Umang

    Hello Umang,
    It is not possible to change the technical name of a Cube. There are too many complexities.
    You could create a new cube with the same structure using the 'copy from ' function while creating it and give it the desired name..
    If it helps, provide points.
    Regards,
    Ashok Saha

  • Change Technical Name of Info Provider

    Hi Experts,
    I am in a situation where I have to change the technical name of the DSO. Is it possible? If so, please tell me how to do it.
    With Kind Regards,
    Kannan

    Hi Kannan,
    No, you cannot change the technical name of DSO, only the description can be changed.
    If your DSO is a new one and the data is not yet loaded. Just delete it and create a new one. But if it is an old one and data is loaded, then you have to backup that data , delete the old DSO and create a new one (You may also create a copy of DSO). Make sure the update rules/Transformation related to your DSO are also checked because it will create issues if your DSO is a source for other targets.
    Hope this helps
    Regards
    Sai

  • I gave my wife a new Ipad 2 she gave me hers old one How do I change her name to mine and get access to my emails

    I gave my wife an ipad 2 she gave me her old ipad how do I change her detail to me and access my email account on her Ipad
    This will be I guess the first of many questions
    Thanks

    You really should download and read the user guide that roaminggnome gave you the link for in the post above.
    If you want to totally start from scratch and erase all of her content go to Settings>General>Reset>Erase All Content and Settings. This removes everything from the device and returns it to out of the box status. You can also restore the iPad as a new device in iTunes and that erases everything as well. This article explains that process.
    http://support.apple.com/kb/ht1414
    If you want to rename the iPad, connect the iPad to your computer and launch iTunes. Double click on the text of the iPad's name on the left grey source list of iTunes and you can change the name of the iPad. When you are finished typing in the new name, hit the return key on your keyboard. This article explains it for you.
    http://support.apple.com/kb/ht3965
    You will want to delete her mail accounts on the iPad if you have not done so already and set up your own mail accounts. This article will tell you how to do that.
    http://www.apple.com/support/ipad/assistant/mail/

  • Issues changing DAQ name in Measurement and Automation.

    I am currently using LabVIEW 8.2 w/Measurement & Automation 4.4.1 with Drivers 8.7. I am having using four USB6008s and cannot change the resource name in M&A. It seems to crash this application. Any ideas?

    Thank you,
    While running M&A, I would go under the Devices and Interfaces tab, select NI-DAQmx Devices, select my card which happens to be a USB6008. From this point I right click on the device and in the drop down menu I select Rename. After changing the name of the device I hit enter and wait. It eventually comes up with a fault indicator and states "
    Measurement & Automation Explorer has encountered a problem and needs to close. We are sorry for the inconvenience."
    At this point the window offers a "send fault to MS" or quit both resulting in the M&A application to close.

  • Virtual infoobjects: technical name in source and target systems

    Hello Everybody,
    actually I got a problem: I´ve created a virtual characteristic which is working fine on development system.
    However after transporting to target system the BADI implementation containing the virtual infoobject dumps:
    assign component 'Z____723' of structure cs_data to .
    Is there any other way to avoid using these technical names 'Z____723' and use e.g. 0customer instead?
    I would have expected, that the technical name for the virtual characteristic in my case 'Z____723' for 0customer will be the same in dev as in prod.
    Thank You!
    Goliad001

    In my case I need to copy a Production Client (say 900) to a Test Client on a test machine (say client 700), what I came to know was that this is basically a client copy, but since the size of data involved is to the tune of 500GB +, it is System Copy.
    Client Copy and System Copy are two different method to transfer the data and process are toatally different.
    >> Also if on the present test machine I am to keep the present client 700 and if the resources permit, create a new client (say 800) and copy client 900 to it, is it a System Copy.
    No. It will be client copy which is not possible as your Source/Target system are on different Support Pack level.
    Or if I copy the client 900 to the existing client 700, is this a System Refresh ???
    No. It will again a Client copy. You have confused between System Copy and Client Copy. I would suggest to to read first what is the difference between these two and the process to do that.
    Regards,
    Subhash

  • How to change column names in dimension and cube views?

    whenever AWM creates a view on a dimension or cube, it creates columns for long and short description with full name
    forexanmpel, it creates like
    CREATE OR REPLACE VIEW OLAPTRAIN.CHANNEL_VIEW
    AS
    SELECT
    "DIM_KEY",
    "LEVEL_NAME",
    "MEMBER_TYPE",
    "DIM_ORDER",
    "LONG_DESCRIPTION",
    "SHORT_DESCRIPTION",
    "ALL_CHANNELS_LONG_DESCRI",
    "ALL_CHANNELS_SHORT_DESCR",
    "CLASS_LONG_DESCRIPTION",
    "CLASS_SHORT_DESCRIPTION",
    "CHANNEL_LONG_DESCRIPTION",
    "CHANNEL_SHORT_DESCRIPTIO",
    "CHANNEL_TYPE",
    "CHANNEL_CHANNEL_TYPE",
    "CHANNEL_ALL_CHANNELS_ID",
    "CHANNEL_CLASS_ID",
    "CHANNEL_CHANNEL_ID"
    FROM TABLE(CUBE_TABLE('"OLAPTRAIN"."CHANNEL"') );
    what is the way to customize the column name? for example for class level, how can we say insterad of long_description and short_description, use LONG and SHORT simply?
    i also see the size of long and short descriptions are set to varchar2(60) and varchar2(20), is there a way to change that for each level in AWM?
    Thanks

    Hi there,
    I don't think there is a way to control the column names within the OLAP product itself, but if this is something you really want to do, have you tried creating your own views?
    As you can see, the syntax is pretty simple
    Thanks,
    Stuart Bunby
    OLAP Blog: http://oracleOLAP.blogspot.com
    OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
    OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
    DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

  • Change colors in Assignment Block and view

    Hi All,
      I have a different sort of requirement. I want to change the color of the assignment block and individual views with different colors.
    Please guide me to complete the scenarios.
    Shyam K Gangisetti.

    Hi Shyam,
    Please give me exact requirement so that i can suggest you the options.
    Thanks,
    Mamta

  • Forcing naming convention for queries and views

    Hello Friends,
    Can anyone tell me how to Force user to save queries with starting letter 'Q' and all views with 'V'.
    I know how to restrict queries ..
    Please tell me how to Froce Views to save with first letter 'V'.
    Thanks,
    Ram

    you need these values in your role to restrict them save queries with starting letter 'Q' and all views with 'V'.
    S_RS_COMP
             RSZCOMPID-Q*
             RSZCOMPTP - REP
    S_RS_COMP
             RSZCOMPID-V*
             RSZCOMPTP - QVW
    S_RS_COMP1
             RSZCOMPID-Q, V
             RSZCOMPTP - REP,QVW
    and as you know activity will be 01 for giving create ability, don't forget to restrict on infocube and infoarea. one thing you have to rethink is why you want to use Q, V as a starting letter, I would prefer Y,Z.
    and lot of companies do restrict for different naming conventions on different infoarea/infoprovider. just a casual suggestion, it will be better for your company in future, if you restrict the reporting component's naming conventions more specific. something like Zinfoprovider name_reporting component_*.
    regards
    Message was edited by:
            Keerti Vemulapalli

  • Possible to change DNS name... and how

    OK, working on an Advanced Server that was setup months ago. An active server used by a small workgroup. It was setup using server1.domain1.local DNS name and now would like to change it to server2.domain2.com Can this be done, if so how? It will have the same external and internal IP addresses.- Lewis

    Hi Lewis
    This has been discussed many times before. Use the changeip command. A search would reveal how to use it or you can simply consult the manual page for correct usage, man changeip.
    Alternatively you could consult the Admin Manual?
    http://images.apple.com/server/macosx/docs/CommandLine_Adminv10.5.pdf
    Pages 68-69
    Tony

Maybe you are looking for