Change the address of ship to party in the shipment document
Hello Gurus,
Is there a way we can change the address of ship to party in the shipment document????
When I go to stages, it only display the address, its not allowing me to change the address though the shipment is in change mode.....
Please advise...
Thanks and Regards,
Pavan P.
Dear Pavan,
You try with this option,I havn't tried in my system because I have some technical problem in my system.
-->Go to Shipment document in Display mode (transaction VT03N).
-->Click on Document flow Icon
-->Select delivery then click on Display document.
-->System will take you to the Delivery document display mode here you Change the display mode of the delivery to the change mode.
-->Now you click on address push button go into address detail screen then change the address.
Note:-You can able to change the address of the ship to party before PGI.
I hope it will help you
Regards,
Murali.
Similar Messages
-
Sold to party and Ship to party are the same but has different address
Hi,
I have problem here wherein Sales order has the same sold to party and ship to party but they have different address. When the customer master data is changed the sold to party in the sales order is also updated but the ship to party is not updated.
I've checked the table VBPA and I noticed that the value of ship to party VBPA-ADRDA is 'E' (manually enetered).
Is this the reason why the address of ship to party in sales order is not updated whenever the customer master is change?
Another question, how does ship to party entered in sales order manually?
Thanks in advance.Hi,
Please correct me if I have understood the scenario incorrectly which I try to explain below:
Sales order is created where SP and SH both have same address initially and while creating the SO, address of the SH was changed manually by Header>partners>SH
Now master data for that customer is changed for address. As per the standard functionality of SAP, all sales order created for that customer will have new address for SP only.
If address of SH needs to be changed in SO, it has to be done manually by the same way as explained in the above mails.
As far as manually entering the SH in SO is concerned, system will automatcally selects the SH if only one record is available for SH. If you have specified more than one SH, system will give you an option to select one by displaying a pop up.
Please let me know if you find this explanation suitable.
Ravi -
How to maintain the multipul address to ship to party
hi sd network this is prasad i want to the solutions
At header level we can change the address of ship to party manually.For the item level initally it will be disabled no changes will be allowed.In order to change the address,first delete ship to party number or name enter any other ship to part name,it ask for redetermining of route then,again enter the old SH no(if required) and again ask for redetermining of route.
Now double click the SH,this will enable to enter new address.
Hope this will help you
Ramesh -
To Send the Email to Ship to Party for Shipment Notification in SMARTFORMS
HI Gurus,
I am having a scenario to send the EMAIL for Shipment Notification using SMARTFORMS when processed through VT01/VT02N transaction.
I general process, the email is going to Forwarding agent Email address. But the user wants to send the notification to Ship to Party email address.
Is there any IMG settings to be done or should we handle using Custom Driver program.? If yes, can anyone help how to achive this.
Your help is greatly appreciated.
Regards,
YathishJust take a look at this where PO is discussed but should not be different from your issue
PO as SMART Form and mail as PDF
Scheduling Agreement as PDF in email ?
External Email (PDF Attachment) while PO is created or Changed
Convert PO into PDF format and send by an email to vendor
PDF form as email attachment for purchase order
Send PO as email attachment
How to convert smartform output to PDF and mailing them
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292
Regards,
Ravi
Note - Please mark all the helpful answers -
How to join tables to show the Ship-to party of the SO...
To output a list not only show the Ship-to Party of the SO header, but also show the Ship-to party for every item of the SO.
Thanks!!!
How many tables coule get this done??
Thanks.Hi Hoo Laa,
Use Partner function WE as Ship to party ( While selecting the data use WE,do not use SH)
Check the below program :
REPORT Zxyz.
tables : vbak,
vbap,
vbpa.
data : begin of i_final occurs 0,
vbeln like vbak-vbeln,
vkorg like vbak-vkorg,
kunnr like vbak-kunnr," Sold to party
posnr like vbap-posnr,
matnr like vbap-matnr,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_final.
data : begin of i_output occurs 0,
vbeln like vbak-vbeln,
vkorg like vbak-vkorg,
kunnr like vbpa-kunnr," Sold to party
posnr like vbap-posnr,
matnr like vbap-matnr,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_output.
start-of-selection.
select avbeln avkorg
bposnr bmatnr bkwmeng bnetpr
into table i_final up to 100 rows
from vbak as a inner join vbap as b on bvbeln = avbeln.
loop at i_final.
select single * from vbpa into vbpa
where vbeln = i_final-vbeln
and parvw = 'WE'. -> Partner function
if sy-subrc eq 0.
i_output-kunnr = vbpa-kunnr.
endif.
i_output-vbeln = i_final-vbeln.
i_output-vkorg = i_final-vkorg.
i_output-posnr = i_final-posnr.
i_output-matnr = i_final-matnr.
i_output-kwmeng = i_final-kwmeng.
i_output-netpr = i_final-netpr.
append i_output.
endloop.
end-of-selection.
loop at i_output.
write:/ i_output-vbeln,i_output-vkorg,i_output-kunnr,i_output-posnr,
i_output-matnr,i_output-kwmeng,i_output-netpr.
endloop.
Thanks
Seshu -
Wht is the address to contact Apple to downgrade the storage in the iCloud? I purchased more storage the other day and I found out out I just needed to change settings instead.
Are these raw? Jpeg? What version of iPhoto? Of the OS?
-
Management One time Ship-To-Party for a Sales Document
Hello SAP folks,
I have a current requirement for mapping a one time Ship-To-Party address details to Sales Order. Here there is absolutely no issue but when we shall process a subsequent Document i.e. a Rental Contract,
Could we prevent the flow of the new address for Ship-To-Party updated with respect to Sales Order to the Rental Contract ?
The current business need is to process the Contract with address maintained in Customer Master Record.
Eagerly awaiting to hear from you guys on this requirement !!
Regards,
SarthakDear Sathak,
For the Rental Contracts, do you always want the system to pick the address from customer master?
If so you can use a user exit to meet your requirement. Please talk to you Abaper.
Thanks
Murtuza -
Its all the little things I don't like about firefox 4 mainly the layout and the search.I thought my browser would get an upgrade, this is complete downgrade ,I never went with firefox for speed .I went with firefox because i hate toolbars and I loved the fact I could put tpb only in the address bar and go straight to the pirate bay or ww.bbc.co .uk by typing bbc
The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name
Firefox is highly customizable and you may be able to customize it to meet your needs.
If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6 -
In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
How do I add the Address for 2 different PARTIES to the same complex folder
I have a PARTY table and an INTERESTED PARTY table and both contain an ADD_ID from the ADDRESS table.
I created a complex folder with both PARTY.ADD_ID and INT_PARTY.ADD_ID and I want to add the Address info for each each to the folder.
I am only prompted to CHOSE A JOIN when adding the first ADDRESS items, but not for the second.
How do I get both addresses into the same complex folder?Hi Lance,
Using Discoverer Admin 9i, I had already created the Complex folder and was dragging items from the simple ADDRESS folder into it.
Because the simple Address folder is joined to so many other folders being used by my complex folder, I was prompted to chose which join I was referring to - so I selected ADDRESS->PARTY.
Then I tried dragging the same set of address items into the same complex folder again. I expected it to ask me to chose another join (ADDRESS->INTERESTED PARTY) - but it didn't. It assumes I'm still referring to the PARTY join, but I'm not.
I even tried bringing the ADDRESS table in from the database twice (like you would do in an Access query).
I joined ADDRESS->PARTY and ADDRESS1->INTERESTED PARTY, but Discoverer got hung up on that so I ditched that idea.
I will look into your suggestion of manually entering the appropriate SQL.
Thank you for responding.
G Brookes -
When in Safari, I try to text the link in the address bar to a contact through the link at th ebottom of safari and it never goes to th econtact and the message is lost. Any fix here or is it a bug in 7.0.2?
Re Create the task:
1. Open Safari
2. Go to the desired website/address
3. Click the send icon at the bottom (Square with arrow pointed up)
4. Click Message
5. Add contact in "To:" line
6. Hit send
It locks up and lags here on me and the message never shows up at the contacts phone/imessage/etc.Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
How can I synch the Address Book on my Mac to the Contacts on my iPad (or, can I setup Address Book on my iPad?)
Selected under the Info tab for your iPad sync preferences with iTunes.
With such a question, you should spend some time with the user guide.
http://manuals.info.apple.com/en/ipad_user_guide.pdf -
consider this situation,
Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.
my tables are from northwind:
[orders] = OrderID, CustomerID, EmployeeID, OrderDate, RequiredDate, ShippedDate, ShipVia, Freight, ShipName, ShipAddress, ShipCity, ShipRegion, ShipPostalCode, ShipCountry.
[orders details] = OrderID, ProductID, UnitPrice, Quantity, Discount.
i tried some but it is not exact, it gives wrong result.
select pd.CustomerID,pd.ProductID, pd.no_of_time_purchased, sd.ShipVia, sd.same_ship_count, shipped_day from
select ProductID,o.CustomerID,COUNT(productid) as no_of_time_purchased
from orders o join [Order Details] od on o.OrderID=od.OrderID group by ProductID,o.CustomerID
having count(od.ProductID) >1) pd
join
(select OrderID,customerid, shipvia, count(shipvia)as same_ship_count, DATENAME(DW,ShippedDate)as shipped_day from orders
group by customerid, ShipVia, ShippedDate having COUNT(ShipVia) > 1 ) sd
on sd.CustomerID=pd.CustomerIDHi,
I think I have a solution that will at least give you a clue how to go about it. I have simplified the tables you mentioned and created them as temporary tables on my side, with some fake data to test with. I have incldued the generation of these temporary
tables for your review.
In my example I have included:
1. A customer which has purchased the same product on the same day, using the same ship 3 times,
2. Another example the same as the first but the third purchase was on a different day
3. Another example the same as the first but the third purchase was a different product
4. Another example the same as the first but the third purchase was using a different "ShipVia".
You should be able to see that by grouping on all of the columns that you wich to return, you should not need to perform any subselects.
Please let me know if I have missed any requirements.
Hope this helps:
CREATE TABLE #ORDERS
OrderID INT,
CustomerID INT,
OrderDate DATETIME,
ShipVia VARCHAR(5)
CREATE TABLE #ORDERS_DETAILS
OrderID INT,
ProductID INT,
INSERT INTO #ORDERS
VALUES
(1, 1, GETDATE(), 'ABC'),
(2, 1, GETDATE(), 'ABC'),
(3, 1, GETDATE(), 'ABC'),
(4, 2, GETDATE() - 4, 'DEF'),
(5, 2, GETDATE() - 4, 'DEF'),
(6, 2, GETDATE() - 5, 'DEF'),
(7, 3, GETDATE() - 10, 'GHI'),
(8, 3, GETDATE() - 10, 'GHI'),
(9, 3, GETDATE() - 10, 'GHI'),
(10, 4, GETDATE() - 10, 'JKL'),
(11, 4, GETDATE() - 10, 'JKL'),
(12, 4, GETDATE() - 10, 'MNO')
INSERT INTO #ORDERS_DETAILS
VALUES
(1, 1),
(2, 1),
(3, 1),
(4, 2),
(5, 2),
(6, 2),
(7, 3),
(8, 3),
(9, 4),
(10, 5),
(11, 5),
(12, 5)
SELECT * FROM #ORDERS
SELECT * FROM #ORDERS_DETAILS
SELECT
O.CustomerID,
OD.ProductID,
O.ShipVia,
COUNT(O.ShipVia),
DATENAME(DW, O.OrderDate) AS [Shipped Day]
FROM #ORDERS O
JOIN #ORDERS_DETAILS OD ON O.orderID = OD.OrderID
GROUP BY OD.ProductID, O.CustomerID, O.ShipVia, DATENAME(DW, O.OrderDate) HAVING COUNT(OD.ProductID) > 1
DROP TABLE #ORDERS
DROP TABLE #ORDERS_DETAILS -
I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?
I cannot order photo prints from iphoto.
Are you trying to print from iPhoto on your Mac or iPad/iPhone? If you are trying to print form yor Mac, check, if the Print Products Store in the iPhoto Preferences > Advanced is set to U.K.
Also the bimmling address, Delivery address, the country for your AppleID and Credit Card must all be in the same country. Check this document:
http://store.apple.com/uk/help/print_products
-- Léonie -
I have the original iPhone and I can't sync the address book from my Mac to the iPhone. What should be the problem and can I sync?
Thanks a lot for the answer. I'm so upset, have no even one contact on my phone. I has to do with the moving to iCloud from MobileMe.
I did exactly what you wrote, and when trying to click the vcf file on the iPhone the screen freezing, and then after few long seconds it goes alon to home.
So I tried less contacts in a Vcard, and i'm dividing my address book, doing little by little and it work.
Thank you so much.
I still dont get why the sync with my computer address book is not working.
And why when I moved to icloud all the photos I had next to the contacts are disappered.
I had my iPad, which it still, I did not move from MobileMe to iCloud and all the photos are there!
Anything I can do to use the iCloud on the iPad as well and update the iCloud with the photos?
Maybe you are looking for
-
when i try to open itunes ,this written appears :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file. "What does it mean?
-
I have a valid itunes store account and have bought (sigh=) itunesmatch service... i am so far very dispapointed... there is not way to open a SR into express lane without having an apple device serial number (THANK YOU for the pc users to which i be
-
View xml in pdf format? - Please help-
I have a webpage that has a link that directs customers to a pdf form I created with Adobe Designer 7.0 and when the customer is done filling out their information in the form and click's the submit email button. It comes to my inbox in an .xml! is t
-
Free app not available in my country!
A free app that creates cards is not available in my country! I'd understand if it was something illegal! How can I get it?
-
HT4848 Error creating recovery disk in Disk Assist
I've carefully followed all instruction in this post: http://support.apple.com/kb/ht4848, but I am having an error when creating the recovery disk. The recovery Disk Assist starts creating it, but stops early on. The message I get is titled "Conclusi