Change the Adobe ID saved by the Adobe CC client?

Hey out there!
I've just bought a one-year subscription for Adobe CC. Registration worked fine, but the problem is that another Adobe ID was used on my PC before that has not been activated. This may seem a slightly silly question, but every time I open my local CC client, it just prompts me to activate the other Adobe ID and I can't find a way to log in via the Adobe ID I bought my CC subscription with. (And even though I have access to the mail address the former Adobe ID was registered on, re-sending the confirmation mail doesn't work, so I can't just try to log in with the old Adobe ID and see if I can change the log-in data after signing in).
Re-installing the CC client doesn't help, so am I not seeing the wood for the trees or is the procedure of signing in with another Adobe ID intentionally harder than it ought to be from my point of view? I figure deleting the registry entries for the CC client (I'm using Windows 8) will probably do the trick, but does anybody know where exactly to find the relevant entries to the Windows registry?
Glad for your help!
Joscha

There is no way to access a menu point called "Not my ID", as the CC client doesn't even manage to log on to the preset account. However, when using a different Windows user account on my PC, I can freely choose the Adobe ID I want to log in with. Obviously, the log in information is saved somewhere in my user specific data, so if I would find the place where it is stored that would probably solve my problem. Does anybody know where the CC client saves its log in information? I've tried running the CC Cleaner Tool, but that hasn't shown any effect.
Regards,
Joscha

Similar Messages

  • Changing the Receiver BI Client No.

    Has any one tried changing the BI Client No in the Receiver when using the "initial reduction scenario".
    My scenario is this
    Sender BI Client 200
    Receiver BI Client needs to be 300 .
    I have done it with ECC and CRM but never tried for BI.
    Let me know if there are any issues with this sort of setup.
    Regards
    AnoopKrishnan
    Edited by: Anoop Raveendran on Jul 30, 2010 12:55 AM

    Thanks Guys,
    Here is what i did
    1) Changed the client in BI through the options in the TDMS initial reduction scenario.
    2) After the above mentioned client copy was complete I changed the BWMANDT column in table RSADMINA to point to the new I client created
    3) Ran BDLS in the all the BI source systems (to change the BI logical client entry) which were to be connected to the New BI system
    4) Ran BDLS in the BI system
        a) change the logical system name for the BI system
        b) change the logical system name for all the source systems connected to BI (In my case the source systems were also different than what existed in the sender BI system)
    5) You might have to restore the BI system as well through RSA1. This is because when we chang the target client all the partner profiles(available in WE20 transaction) and Port Definitions (WE21) were missing in the New BI system.
    6) Then Restored  the all the source sytem connections  through transaction RSA1.
    Along with this i did the regular Post-Installation Steps of System Copy and Client Copy.

  • Changing the defauly mail client

    Hi,
    When I open mail to change the default client, when I go to preferences the menu bar it is grayed out and unclickable.
    And when I click cancel on the wizard Mail quits.
    How do I the default Mail client if the menu item is unclickable?
    Cheers!

    You should set up a dummy email account using the setup wizard. Once it checks for email and fails, you should be able to change the preferences.
    http://www.wikihow.com/Change-the-Default-Email-Client-on-Mac-OS-X

  • How do I change the default email client from Thunderbird to Gmail in FF 3.6.17?

    Using Mac, OS 10.6.7 and Firefox 3.6.17
    When I click on an email address link, Thunderbird launches, but I want always to use Gmail. How do I change the email client from Thunderbird to Gmail?

    THANK YOU SO MUCH, Tony!
    I knew it had to be pretty simple...I just couldn't find the exact location to make the change. Now done. What a relief!!!

  • How do you change the Selected Email Client

    I have created a form that submits XML data by email.
    The first time you click the "Submit by Email" button, a dialogue box opens up and asks you to select one of 3 options: "Desktop Email Application", "Internet Email" or "Other".
    The problem that is occurring is that people will either not read the statement or out of ignorance select "Desktop Email Application" when in fact they have internet based email. There is no apparent way to go back and reset this preference.
    Does anyone know where this preference is stored and how to change it?
    Alternatively, does anyone know how to generate the XML file by an alternate method that could be saved and then attached to an email?
    This has been a major problem that has prevented the use of this form, any help would be greatly appreciated.

    This setting is handled by your Operating System.  On Winddows (Win7) you go to Control Panel->Programs->Default Programs->Set Default Programs.  On OS X you set this using the preferences of you email client.  For example launch Mail and go to Mail->Preferences->General.  The first setting is for default email client.
    Hope this helps.
    Jeff Canepa
    Software Quality Engineer
    Adobe Systems, Inc.
    [email protected]

  • How do you change the default email client (Mail) to Outlook when sharing?

    In iPhoto I used Outlook as the default email to forward photos to friends.  How do you change it from Mail in Photos to Outlook?

    I am having the same problem.
    Just updated to OS X 10.10.3.
    The new Photos app will not link to Microsoft Outlook.
    Never had this problem with previous versions of iPhoto.
    I have a thread going on this topic:
    The new "Photos" will not link to Outlook email.
    Apple needs to update Photos 1.0.

  • What if I'm trying to change the default mail client, and "mailto" is not listed under applications?

    "Mailto" is not listed under the applications tab in settings.

    See "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions
    Delete [http://kb.mozillazine.org/mimeTypes.rdf mimeTypes.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]

  • Lose Internet connection when I change the SSID

    Hi everyone!
    well, i bought a WRT160N router, and i have a problem that is annoying me.
    I connected the Router to the modem, and all the wired connected PCs were working perfectly.
    But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection dropped!
    The only way i had to fix this was by making a Hard Reset.
    after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
    Here you have an image of this:
    http://imageshack.us/photo/my-images/41/sinttuloesw.png/
    I thought that this was a hardware related problem, and i returned the router for another wrt160n, and the problem persisted.
    Also, i have the latest firmware
    Any idea?

    I thought that a wireless client connects to the named SSID that you designate.  If you change the SSID while clients are connected, that would be like the network disappearing as far as the clients are concerned.  So you would have to reconnect the clients that were connected to that SSID network.  Other wireless network parameters that you change would also cause disconnects, like changing the security, changing the passphrase, etc., you would have to reconnect clients with the new parameters that were connected at the time you made the changes.

  • Changing The Default Window Icons

    Is there a way to change the MDI Window Icon when the Form is run on the web. Changing the icon in client/server seems to work well with the following (attached d2kwutil.pll):
    declare
    a pls_integer;
    begin
    a := win_api_utility.get_active_window(false);
    win_api_session.change_mdi_icon(A,'newiconfilename',0);
    end;
    The problem with this is that it will always raise an error on the web because It cannot get the handle for the window (Frame) in Java. Is there a way to change the icon or am I just shooting in the dark. Any help would be appreciated.
    null

    hi sir
    my name OSAMA and wanna your help in changing MDI window
    i trying this code
    I am trying this code
    Declare
    hWin pls_integer := win_api_utility.get_active_window;
    Begin
    WIN_API_SESSION.CHANGE_MDI_ICON(hWin,'e:\e.ico',0);
    End;
    I have error
    frm-40734: internal error :pl-sql error occurred
    sorry but this is an urgent problem
    thank you sir
    osama

  • Changing the order for printing portfolio files in adobe acrobat 9 pro

    Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro?  The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order.  This won't work for me. Any ideas? Thanks.

    Question1: No.
    Question2: No.

  • Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

    Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

    jpg does not support Layers.
    Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

  • Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

    I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

    Adobe Reader for iOS doesn't set the default email address when you email a PDF.
    It's found in the Settings app:
    Settings > Mail, Contacts, Calendars > Mail > Default Account

  • How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

    How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

    Most forms (99% or more) are created for simple text input, where you cannot change anything.
    The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look.  But I'm sure they would show some kind of controls to alter the text appearance.

  • I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it. Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read... I sent on the PC setting to try to change the display resolution.

    I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
    Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
    I went into the PC settings and tried to change the display resolution. This changes the size of all  the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!

    Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
    Mylenium

Maybe you are looking for