Change the Agreement details using the vendor number

Hello All,
My requirement is to get the Agreement number and line item details corresponding to a vendor from a Z table.
I am able to read the vendor number using BADI ME_PROCESS_REQ_CUST and method GET_DATA
Now i want to set the agreement details. I have fetched the details from the table, but i am not ablt to set these details in PR.
I tried using method SET_TEXT but nothing works.
Please suggest.
Thanks & Regards,
Tarun

Hi,
what exactly do you mean by setting agreements details? Is it one of the long texts on item level? If yes then you should be able to update long text on time level using method using method IF_LONGTEXTS_MM~SET_TEXT. I've done this before but for PO and I did not have any problems. I assume that PR and PO are really similar. Which BADI method do you use to update items?
Cheers

Similar Messages

  • SAP has T-code to auto send out the payment detail to each vendor ??

    Hi,
    Could you advise if SAP has T-code to auto send out the payment detail to each vendor?
    Thanks
    Rafi

    So many different ways to do this, but none of it is "Automatic". To automate, you may need to use BTE, workflows, message outputs, etc. First, you need to identify content: Which report or information you want to include. From my experience, no standard report is always sufficient. So depending on your requirements, then outputs from FBL1N or reports under "Print Correspondence" might help. Custom ABAP and SAPScript forms is what seems to work well for some customers. Then you need to decide how you want the message sent: Fax, email, interface, etc. Each decision lead you towards diff implementation. None of which are trivial. So, research your design goals and provide your requirements, then we might be able to provide further help.
    Thanks,
    Samsole

  • What are the main tables using in vendor performance report.

    what are the main tables using in vendor performance report.
    how many select statements are in ABAP reports.

    Refer the links -
    vendor performance report !!!
    vendor performance report
    vendor performance report
    I need standard vendor performance report
    Regards,
    Amit
    Reward all helpful replies.

  • How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

    Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

    The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

  • I am unable to change my screen brightness using the fn+f2/fn+f3 keys. i understand that it can stil

    I am unable to change my screen brightness using the fn+F2/fn+F3 keys. I understand that it can still be adjusted differently but I want this way to work. Also whenever I change my volume using the fn+F7/fn+F8/fn+F9 keys, the little on-screen display doesn't pop-up any more. I would like to fix this and any help would be greatly appreciated.

    Hi
    You have a couple of options as I see it please find the web link given below and the steps might help you to fix your issue on the unit.
    Resolving Problems with the Brightness of the Display
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HT1212 i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?

    i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,

    Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • I got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?

    i got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?
    <edited by host>

    Also in the future please do not post your serial number in the forum.  See this tip on identifying Macs in the future: https://discussions.apple.com/docs/DOC-6413

  • How to load the boot menu using the command line , after the configuration change ?

    how to load the boot menu using the command line , after the configuration change ?

    Hi @Bask-48 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to change the boot order.  Here is a link to Configuring the Boot Order in the System BIOS
    that will assist you.
    Good Luck and Happy Holidays!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How do I change the speed of the cursor when using the arrow keys?

    How do I change the speed of the cursor when using the arrow keys?

    Applications folder or Apple icon > System preferences > Keyboard increase key repeat.

  • Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
    Any help would be appreciated
    BTW
    Ive tried all the system sound prefs, and garage band drivers. Back and forth.
    cheers
    ds

  • I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
    Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
    Be sure to open Keychain Access and repair the keychain:
    Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

  • Delete the transferred values using the transaction for changing old assets

    how to Delete the transferred values using the transaction for changing old assets.
    i want delete the my asset.
    Thank you
    Anil

    Dear Anil,
    AS06                 Delete Asset Record/Mark for Delet.
    AS26                 Mark group asset for deletion     
    Hope this will help.
    Regards,
    Naveen.

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • Source determination of agreement which used SC vendor.

    Need to deliver to vendor B when purchasing one item on agreement 4601001470 from vendor A.
    The user tried ticking the SC vendor checkbox on the delivery tab for each item in the agreement and also entered vendor B. This did not work. When the tickbox is checked and SC vendor number entered the agreement details do not autopopulate into the requisition. It is also then not possible to manually assign the source of supply in the requisition.  we can't get source determination to work on this material, even though the contract and source list looks OK.
    If anybody have solution,Please help me.Thanks.

    Have you done PIR on Subcontract Info category for Vendor B.?
    Check Source list for Vendor B maintiaed or not.
    Try 1 : Give the Vendor B ( Subcontractor ) In te out line document by following the path
    Seelct the line in O.A go to Item -
    > more function -
    > Delivery Address, you will get the pop up, where you can maintain the Subcontact vendor with tick.
    Try 2 : By fixing the vendor in SOuce list
    Let me know if still problem is there.?

  • Not able to get the PERNR Details in the LOG overview

    Hi,
    I have uploaded the data into info types 0000 and 0001 through PA30 transaction using LSMW,Recorging,Batch input method.
    once LSMW is executed,PERNRs are getting created successfully in the ECC with in the Internal number range.(We are giving PERNRs in the input file).
    I want to get a list of PERNRs which are generated by me after executing the LSMW (I do not want to refer PA0000 table to get the details). Actually I am not able to check the PERNR details in the LOG overview.
    Please help me.

    Try this way..
    goto tcode SM35
    select the session name  and press the LOG button
    and again select the session name in log overview press the dispaly button or press the double click the session name.
    after this press the print button or CTRL+P
    there you have option to download the log to excel file , after downloading the log , select based on message number which are created ....

Maybe you are looking for

  • Disable scrolling animations in Mail

    Hi everybody, I really like the new Mail-App in Lion. But is there a possibility to disablle the scrolling-animation (wenn you press FN+Down/Up-Arrow-Key) in Mail that it behaves like Snow Leopard Mail. If you want to flip through multi-pages-mails v

  • Ipod wont connect to computer and constantly says ok to disconnect

    Hey, please help!! my ipod nano wont connect with my computer and when i plug it in the 'ok to disconnect' screen comes up with a black tick. I've tried eveything the website says and the trouble is because it can't connect to the computer i cant res

  • Error while Debugging MSA  'Creation of Login Object Failed'

    Dear Friends, I am working on CRM Mobile Sales 5.0 SP 5. I have setup my Mobile Client and Mobile Application Studion On the same machine. I have perform the initial generation of the application from Mobile Repository server to my machine. it gave m

  • Xbox 360 250GB trade-in

    So I went to my local best buy today and was all set to trade in my 360 for the "trade-in and trade up" promotion.. Then the person at customer service tells me that I was missing a controller to get the $150 credit..  I've read the promo terms and u

  • How to see statistics of percentages of total CPU time in ESXi 5.5 (using esxtop)?

    Hi everyone, I'm using ssh to connect to my ESXi server console. Using esxtop, I get the following result: You can see below the CORE UTIL line, the CCPU line is not present here. Is it missing? If not, how can I see percentages of CPU time (the "us"