Change the Alert from Going to email to SMS

Hello,
Currently we have an interface that send an Alert to an email address when there are some processing errors on XI. I was wondering where I should change this to send the message to SMS instead of an email Address. I checked ALRTCATDEF and Alert Configuration in the RWB and dont see any reference to email or anything else. I would really appreciate it if someone can help me in this regard. All I need to do is toggle the email to SMS. I dont know where exactly to do that.
Thanks.

You need to configure SAPConnect for the same.
Have a look at the following URL,
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
Thanks.

Similar Messages

I want to change the account from the creative cloud i cant cuz he said verify your email address !

i want to change the account from the creative cloud i cant cuz he said verify your email address !
its a fake email i want to change it i have a another account but i cant log out with that account

http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
or
Chat Now button near the bottom for Activation and Deactivation may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

TS3999 How do you Change the sent from email for iCal invitations on my iPad. It uses the iCloud email but I want it to use my work email.

How do you Change the sent from email for iCal invitations on my iPad. It uses the iCloud email but I want it to use my work email.
It keeps sending from my bosses ICloud account, we are all synced at work but I want all my invitations to come from me, not my bosses iCloud account!
Need to know how to do it on the iPad!!

Hi garretktowne,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple ID: Changing your Apple ID
http://support.apple.com/kb/HT5621
Cheers,
- Judy

[svn:fx-trunk] 9180: When another popup is going away as the alert is going up, the Alert can get validated inside of addPopUp and its centering logic never got the event it expected .

Revision: 9180
Author:   [email protected]
Date:     2009-08-07 15:11:43 -0700 (Fri, 07 Aug 2009)
Log Message:
When another popup is going away as the alert is going up, the Alert can get validated inside of addPopUp and its centering logic never got the event it expected.
add the event listener earlier so it is ready if we get validated inside addPopUp
QE Notes: versioning/baselines/mp_alert_mask_compatible.png needs updating. I think the current baseline is incorrect.
Doc Notes: None
Bugs: SDK-22819
Reviewer: darrell
tests: checkintests mustella/components/alert
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22819
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Alert.as

Hi or2tx2002,
We're really sorry to learn of all the equipment issues you've experienced in the last year. In order to discuss your replacement options, I ask that you please PM me with your wireless number, a contact number and a good time to reach you. I will be happy to reach out to you and bring resolution to this matter.
Thank you and I look forward to hearing from you soon. Make it a great day!

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

How do you change the Received: From in the message header to correct external address

We have trouble every so often sending a message to customers will get a bounce back. Basically it is using our local internal name (mailserver.local) instead of our External name (mail.domain.com). We have a pretty
simple setup one Server (no edge server) with and SSL certificate. I went in to the Hub Transport setting and made sure the FQDN was mail.domain.com and it was. I have read on the subject some people suggest getting your ISP to create a pointer
record for the IP to the internal name. That will not work for us, because we may be changing ISPs in the near future.
I included a bounce and current header info.
So is there a way to change the "Received: from" server name to our external name?
Bounce Message
Generating server: mailserver.local
[email protected] TUK-UTM.theirdomain.com #550 Invalid RDNS entry for 96.43.XX.XX ##
Message headers
Received: from mailserver.local ([::1]) by
mailserver.local ([::1]) with mapi id 14.01.0438.000; Fri, 9 Jan
2015 11:35:19 -0600
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: test1 <[email protected]>
To: test2 <[email protected]>
Subject: test 2
Thread-Topic: test 2
Thread-Index: AdAsMp9XJVDQap4vSC6OcUEejnFNCw==
Date: Fri, 9 Jan 2015 11:35:18 -0600
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: mailserver.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.XX.XX]

The error message states the reverse DNS entry isn't valid. I agree with Willard that setting up an SPF record will help your overall spam score from receiving hosts, but in this case it should simply be resolved by configuring a reverse DNS.
Receiving mail hosts on the Internet usually care most about the IP that's connecting to them. One of the most common tests is the reverse DNS (since the SMTP connection comes from 96.43.X.X, the receiving host will ask itself "does 96.43.X.X really
belong to the TUK-UTM.theirdomain.com ? and will go and check for PTR records for 96.43.X.X) It's this check that's failed.
Even if you'll be changing your ISP in the future, you would still have ownership for your DNS domains, right ? It should be your company paying for this service after all.

Are you sure you want to change the extension from... BLOCKS Finder Editing

This is weird and is driving me nuts, but some Macs do not allow further Finder editing of file or folder names if I change their names (usually including numbers, dots and so on) in such a way that I receive the warning:
Are you sure you want to change the extension from..?
After I confirm that I want to change the name, the Finder does it but gets locked for editing (I can do other things) and does not allow any further file or folder editing until I force quit of Finder or reboot the Mac.
I have found that if right after confirming that I want to change the name I select the file and hit return (which selects its name), no problem arises. But I must do it in one or two seconds, or else it will be too late.
IN SUMMARY:
1. Change file or folder name including numbers and dots at the end.
2. Get the message "Are you sure you want to change the extension from..."
3. Confirm that I want to change the name.
4. FROM NOW ON, I CANNOT CHANGE THE NAME OF ANY FILE OR FOLDER UNTIL I FORCE FINDER QUIT. Unless of course I do the trick indicated above real quick!
Any hint? Any way to know what is going on? This could be a bug of Mac OS X 10.4.x or earlier or a problem with a third party application. But how to know what is going on to prevent it? As said, some Macs show this issue, but not others.
Note: some related issues on this section searching for:
Finder Loses Keyboard Input
or
Sure change extension
For instance:
http://discussions.apple.com/thread.jspa?messageID=1974048
http://discussions.apple.com/thread.jspa?messageID=1466505
Hint: some file or folder name changes are more prone to cause the issue than others. For instance, renaming a folder (and confirming it) as:
Testing.r00
brings the bug 100% of the times.
Any idea of what is going on? Thanks.

The message is a warning that you are doing something that the OS thinks is going to possibly cause a problem. You are creating the situation and the OS is doing nothing other than what you are asking it to do.
I don't know any exact answer why you can't access your files, but I do know that there are a few characters and things that will cause problems because they mimic names of invisible files. When you make a name that is close to being the same it can treat the file as the special one... meaning you can only access it via Terminal.
Ones you cannot use at all: the colon (:), slash (/), single or double period as first characters. (taken from Finder Help with a naming files search) It is best to stay away from any special characters as a rule. Also avoid using a period and 3 character suffix unless it is one that you are purposefully assigning so the file belongs to an application.
That said... even with the over 200 applications on my system I couldn't repeat your Testing.r00 problem. So, I don't know if it may be application related or not.

How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

Thank you. That works when I double click a RAW image, (opens in ACR then when I open from there it goes to CC) but when I double click a jpg it goes straight to CS6. I'm hoping there is a way to change the default, but haven't found yet. I don't want to remove CS6.

What is the best way to limit the audio from going over the -11 volume?

What is command or the tools in the menu list that gives you the option to limit the volume in the audio tracks so they don't go past the -11?
In Sound Track Pro you can "normalize" the volume but this also affects the volume levels of the softer passages too. We only need to stop the audio from going past the -11 decibel.
Thank you,
<Edited by: Host>

Apply the Compressor/Limiter filter. Once you have it set up for one audio clip, you can use the Paste Attributes command to apply it to others.
BTW, don't post your email and phone number in your messages. The forums are accessible to anyone and searchable via Google. It also leaves you at the mercy of spammers. I have asked a moderator to remove them.

How to change the valid from date of the bom header?

ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?

Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No

How do I change the keypad From a split key view to having them all together?

How do I change the keypad From a split key view to having them all together?

Next to the ,?123 key on the lower right hand of you keyboard is the button that allows that feature. You need to hold that section down and the option will appear.

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

How to change the datasource from one server to another server?

i need to change the datasource from development environment to production server. i had configured the JNDI informations like the following in the 'context.xml':
<Context path="/RFT" docBase="RFT" reloadable="true">
<Resource
auth="Container"
type="javax.sql.DataSource"
driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
validationQuery="select 1"
name="jdbc/datasource"
username="sa"
password="$m1sbag$"
maxIdle="-1"
maxActive="0"
maxWait="5000"
url="jdbc:microsoft:sqlserver://172.24.151.149:1433;databaseName=Projectgold" />
<WatchedResource>WEB-INF/web.xml</WatchedResource>
</Context>
and in 'web.xml' included the following code:
<resource-ref>
                     <res-ref-name>jdbc/datasource</res-ref-name>
                     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
</resource-ref>
and mentioned the JNDI Connection Name in the .rpt file as 'jdbc/datasource', but still getting the same connection which one is configured during the report design. need a help to resolve this...
Thanks,
Ram

eventhough it's working fine. I may have deployment problem. Anyway thanks for the reply.
Regards,
Ram

Change the Alert from Going to email to SMS

Similar Messages

Maybe you are looking for