Change the Alpha numeric project number sequence

Hi guys
Our project team is always copying Templates to new projects and for the year 2013, we need to set one of the template starting project number to 'SM130001' . We created this new value set with LOOKUPS, however have no clue how we can attach the same with template.
We are on R 12.0.6, RHEL 64Bit
regards,
raj
Edited by: rthampi on Feb 13, 2013 4:01 AM (spelling)

Okay guys, I found it. This was done through a personalization. Sorry for the trouble.
regards,
raj

Similar Messages

  • Alpha-numeric Project No(Prefix-Autonumber-Suffix)

    Hi,
    With the existing feature(no customization) can i bring this project no in quick entry screen automatically??can any expert help me plzzzzzzzzzzz?
    This is the very small feature all the companies can have any combination on deciding Project number sequence...Y oracle is not facilitating this small concept...
    P001-SJ-AJ
    Please help me.....thanks a lot n advance.........

    Thank u john for ur posting.what i c n oracle Project module suite z ...a functional consultant alone can really do nothing....When this stage ll change n oracle EBS world?? Despite dis z the known fact,it had not overcome for many years and history of versions....Project suite is really not in the state to facilitate this very small requirement also..if v start thinking things are complicated then everything is complicated.oracle has to overcome all these extensions to facilitate with the functional setup instead client extension.what an excel sheet can do also project module expecting us to write via client extensions.....
    Prefix 1 text box + automatic no 1 text box + suffix 1 text box the combination can become alphanumeric project no...
    s i need to store project short name and service type short name and i want to combine with automatic generation....at least i need P001 like this to display...i m a pure functional consultant if anybody can come forward with simple steps how to achieve this...wud help other functional consultants also to become a successful delivery manager for the project suite in any business requirements....
    Pls friends facilitate this forum as a project suite techno-functional repository....instead only functional...thanks 4 ur tim 2 read...

  • Can I change the SD's  major number ?

    Hi,
    I need to perform a test scenario where SD's [the default scsi driver provided by Solaris ] major number is greater than some specific value [say 255] . I am wondering if it is OK to just change the value of major number of the SD in /etc/name_to_major and follow it with reboot -r ...
    Would it work or I may end-up making the machine unbootable ?
    Has someone already tried this ..
    Advance Thanks for any useful suggestions,

    KinsaKaUy? wrote:
    Thanks Prab,
    What is the standard naming of a "good" alias? Can you give me a good format sample?
    What if I make the number "100" as the alias? Would it be possible?Off the top of my head I can't think of anything that would cause greater confusion.
    Did you try?
    You can't create a numeric alias that is different to the application ID. Other than an alias that is identical to the app ID, aliases must be valid Oracle identfiers.

  • How to change the status of Serial number

    Hi Experts,
    Would you please help in solving this problem.
    How to change the status of Serial number?
    I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
    How can we do that?
    Regards
    Sri

    Hi,
    Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
    Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
    Regards,
    Ninad Kshirsagar

  • How to change the alpha of a graphic symbol in flash depending on score

    i'm making a game and i don't know what script to use to change the alpha color of the graphic symbol i used.
    the game is a shooting game, ex: target points is 50, if the score is 25 the alpha color should be at 50%, if  score is 50 alpha is at a 100%
    hope someone could help..thanks!!!

    if that's a movieclip button and skeleton_mc is on the same timeline as the button, you'll need to use:
    _parent.skeleton_mc._alpha = score*2;
    if that doesn't work, in that button press, add:
    trace("button "+this);
    and on the timeline that contains skeleton_mc, add
    trace("skeleton "+skeleton_mc);
    and paste the output panel results here.

  • How to change the default servcie port number to be checked for the IPS sig

    Dear
    i have an AIP-SSM (IPS) installed in a an ASA firewall.
    i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
    but the case is that the services have to be checked is not the default services port numbers.
    http port is 8081
    oracle port is 2006
    and many other services.
    the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
    Thanks

    You would set those as part of the signature variables.
    http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009

  • How to change the background color of a sequence?

    I'm using Premiere Pro CS5 on Win7 x64.  I've imported a JPEG that's a different size than my 1920 x 1080 frame.  The background of this JPEG is white, but the background of the sequence is black (by default), so the borders of the JPEG make it stand out.  I want the JPEG to blend into the sequence background by making the sequence background white.  How can I change the sequence background color?  Thanks.

    Jim and Ann are correct. I can see where someone used to After Effects might ask that question though because in AE you can change the background color of the composition. Same with Photoshop.
    However, I think it would confuse things if changing the background color were to be allowed in Premiere Pro. Black tells me something. I suppose white could tell me the same thing, but at this time it is not possible in Premiere Pro.

  • How to change the default new project folder in Premiere Elements 13?

    I keep all my projects on a different drive than the default My Documents folder. How can I change the default setting so that Premiere Elements does not try to create new projects in the My Documents\Pemiere Elements\13.0 folder? In fact, I do not want that folder to be used for anything (including layouts and styles).

    steveb
    Short version....
    Referring to the 13.0 Folder in the Adobe Folder in documents, you wrote
    In fact, I do not want that folder to be used for anything (including layouts and styles). 
    I do not believe that is possible.
    For my best case scenario
    Set the Scratch disks, not to Same As Project, but set for Custom with the set being the save location that you set for the project file.
    Set the project save in, my preference, File Menu/Save As.
    You are going to end up automatically with a 13.0 Folder in the Libraries/Documents/Adobe/Premiere Elements/13.0 Folder every time you open a Premiere Elements project. No matter how many times you try to delete the 13.0 Folder. And that 13.0 Folder will contain a Layout Folder and, if you applied a Style in the project, a Styles Folder.
    Longer Version....
    There is no problem directing your project file to the save location of choice. You can do that two way
    1. After you open the project to the Expert workspace, go to File Menu/Save As to change the name of the project as well as the location for the save in order to avoid the defaults.
    2. You can also do that through File Menu/New/Project.
    That 13.0 Folder also gains its contents from the settings of the scratch discs in Edit Menu/Preferences/Scratch Disc - some examples preview files, disc encoding files, conformed audio files... Some Files/Folders are placed there automatically. So what to do to keep the Documents area clear of Premiere Elements files, project or otherwise after you have move all that you thought you could to a non Adobe default location? See above best case scenario.
    Miscellaneous
    1. If you set the save location of the project in either of the 2 ways, that setting will not hold from project to project. It will hold for that particular project.
    3. If you set the Scratch disks in Edit Menu/Preferences/Scratch Disks, those settings seem to hold from project to project as well as for in the particular project.
    Stevenb, please review and consider and verify. I have gone through several scenarios on what you would prefer. But, I do not see a way to make that happen with the programming that exists.
    ATR

  • How do you change the page layout for number

    When I print a spreadsheet I have created in numbers the header & footers are quite large. Is there a way to change the header & footer size?

    Yes, you can change the position. Do it in Master Layouts. Select the page number - a red box appears around it - select: left, center, or right justification. That will move it within the box. To move the box on the page, just drag the box to where you want it. - Fabe

  • Problem in the isNumeric rule in the Alpha Numeric Rule Library

    The rule isNumeric present in AlphaNumericLibrary is an out of box rule.
    I have found that this rule returns '0' for all types of inputs (numeric/alphanumeric/alphabetic).
    On further investigation I found that the "append" does not work and is just returning a null. I have pasted below a snapshot of the output of the append function.
    <append name='splitList'>
         <substr>
           <ref>testStr</ref> --> abc123def
           <ref>counter</ref> --> 8
           <i>1</i> --> 1
         </substr> --> f
       </append> --> null
    I have also pasted a snapshot of the final result I got while testing the rule.
    Configurator> rule "Alpha Numeric Rules:isNumeric" testStr 23456789 0
    Configurator> rule "Alpha Numeric Rules:isNumeric" testStr abcdefgh
    0
    Configurator> rule "Alpha Numeric Rules:isNumeric" testStr abc123def 0 Can anybody please help me in this case?

    The problem is in the StripNonAlphaNumeric Rule I believe. Instead of doing a <substr>, do a <get> of the current index on charList to produce the correct behavior.

  • How to change the value of project data in the BPM instance?

    Hi Everybody,
    I have a situation that after the bpm instance was created. We found that one of the project data/variable contains the incorrection information. Is it a way we can change the value of that project data/variable? I checked the BPM workspace, as administrator, there are not function for it and we can't stop/withdraw the instance. Can we change the MDS database for it? Please advise. It is so important for us that will stop us to move on of our project.
    Thanks

    As per my knowledge we can not change the value of BPM project variables from outside BPM. If you look at PAPI API also you will find methods to get values from BPM but not to set to BPM.
    If this is daily issue for your application then change your design to add a Edit Data Activity (Screen) and then use Grab functionality to get the control to this Edit Data Activity to change the required data.
    Else if it is an issue with the only one instance then it is better to Abort this instance and re-create the instance with correct data. Changing value in the MDS database is not encouraged.
    Hope this helps.

  • Using date class to change the alpha of an object depending on time (GMT)

    Hi,
    I'm trying (and struggling) to get my head around AS3 and am building a flash webpage. I have 2 layers in the timeline, each containing a movie clip matching the page size with instance names backgroundDay and backgroundNight.
    What I'm wanting is for the background to change for the day and night, so that from 18:00 to 06:00 the alpha of backgroundDay becomes 0 to show backgroundNight behind.
    I'm been scouring the internet and haven't found anything so if anyone can help it'd be much appreciated. 
    Many thanks,
    Sophie

    Yes, you could use a timer. Something like this:
    var t:Timer = new Timer(1000);
    t.addEventListener(TimerEvent.TIMER, timerHandler);
    t.start();
    function timerHandler(event:TimerEvent)
    var d:Date = new Date();
    backgroundDay.alpha = (d.hoursUTC > 5 && d.hoursUTC < 18) ? 1 : 0;

  • Displaying error message on XRPM Portal on changing the status of  Project

    Hi All,
    I want to display an error message on the Portal when user tries to change the status of the Project from 'CREATED' to 'RELEASE' and clicks on SAVE.
    I have checked the following BADI's but i am not able to retrieve the newly selected status.
    DPR_ATTRIBUTES -> Methods 1) CHECK 2) CHANGE_CHECK
    RPM_PROJ_CUST_FIELDS
    Any help will be highly appreciated!
    Thanks.
    Runal.

    Hi Runal,
    I think, the reason is that the status is not attribute of the project, rather a linked object. That is why the Badi method is not get called.
    Please check with the Badi DRP_EVENTS, this Badi is typically called, if the status of object is changed.
    Kind regards,
    Zhenbo

  • IMessage doesn't work after changing the sim. New number isn't even recognised.

    I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
    I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
    How can I make it work?

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • Sorting In The Alpha Numeric Col In Oracle

    Hi,
    I have product table having product_name which can have values like 'STATEMENT Checking' and some 'statement savings' and some times like 123 and some times like '123 Certificate of Deposit'.
    Here the requirement is all the numeric should come first and then the non numeric then also'STATEMENT Checking' and 'statement savings' should come one by one.We are using the upper case in the order by clause like ORDER BY UPPER(product_name) but the numeric fields are not coming properly like 100 seems to be less than 2 because it is sorting based upon the ascii value of the first character.
    Is there any way to over come this.
    Please suggest some ideas.
    Regards,
    Papi

    Hi,
    here is one way:
    WITH mydata(txt) AS
      SELECT 'STATEMENT Checking' FROM DUAL UNION ALL
      SELECT 'statement savings' FROM DUAL UNION ALL
      SELECT '123' FROM DUAL UNION ALL
      SELECT '123 Certificate of Deposit' FROM DUAL UNION ALL
      SELECT '123 Test with same number' FROM DUAL UNION ALL
      SELECT '2' FROM DUAL UNION ALL
      SELECT '2 Certificate of Deposit' FROM DUAL
    SELECT txt
       FROM mydata
      ORDER BY CASE WHEN REGEXP_LIKE(txt,'^\d+')
                    THEN
                       TO_CHAR(TO_NUMBER(REGEXP_SUBSTR(txt,'^\d+')), '9999999') || REGEXP_REPLACE(txt,'^[\d]+')
                    ELSE UPPER(txt)
               END;
    TXT                      
    2                        
    2 Certificate of Deposit 
    123                      
    123 Certificate of Deposit
    123 Test with same number
    STATEMENT Checking       
    statement savings         Please always remember to post some sample data (CREATE TABLE and INSERT STATEMENT or WITH clause like I did) and your expected output.
    Regards.
    Al

Maybe you are looking for