Change the already installed Win 8.1 BIOS mode from Legacy to UEFI

Hey,
It seems that my Windows 8.1 is installed in BIOS mode: Legacy as "msinfo32.exe" shows. I can boot into it with no issue, but when I go to my laptop's BIOS settings and change the mode back to UEFI, it gives me an error "Operating system not
found" (not sure about the exact error message).
I am just wondering if it is possible to change the Windows 8.1 BIOS mode to UEFI so when I change the laptop's BIOS settings back to UEFI, it can boot into it?
Regards.

Hi Amin CiscoSoft,
Since UEFI mode need an EFI system partition (ESP) which has the partition type ef00, usually contains a FAT32 file system. We need to recreate the partitions needed for booting the installation media in UEFI mode.
Before you doing that we VERY recommended for you to read all contents including Prerequisites and warring paragraph in links below, then perform a backup of your data. If you have a second disk drive big enough, you can simply create a system image and
able to recover the full installation as it was before you started this procedure if anything goes wrong.
Since the steps are complicated, please follow the steps in
http://social.technet.microsoft.com/wiki/contents/articles/14286.converting-windows-bios-installation-to-uefi.aspx
Regards

Similar Messages

I had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

i had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

Hello,
what concerns your wish about an uinstaller, so you should use
https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html >>> AND note this "Read before you download a CS3 product". And esp, "You need your CS3 serial number to complete the installation" but this shouldn't be a problem for you, because you had an official version and so you can use all these informations like https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

Hey Guys I Wanted To Know How Do I Change The Download/Install Location Of Apps I download From The Mac App Store Bac To The Dock Like In Snow Leopard?

So Every Time I Download From The Mac App Store (In Lion) It Always Pops Up And Downloads/Installs In The iOS Feature Thing, So How Do I Change That So It Doenloads/Installs Straight 2 The Dock Like In Snow Leopard?? lol
Specs...
Macbook Pro (Early 2008)
Intel Core 2 Duo
4GB RAM (MAXED)

Actually it does because the Dock is Snow Leopard's program launcher. For Lion, LaunchPad is the program launcher, not the Dock. Don't like that? Here's where you complain. Otherwise, you asked and I answered.

Installing SAP MI 7.0 in the already installed NW 7.0 system.

Hello,
We have SAP Netweaver system 7.0 with UTs EP,PI,BI. Now we want to have MI also installed for Mobile time and travel application. How can i install MI in the already installed NW 7.0(ABAP + JAVA) system. Does installing MI means - installing MI ABAP server component and installing MI JAVA server component??. If so, how can i install these in the NW 7.0 system. Could you also please tell me, what are all the software components i need to download for this.
We are on Solaris SPARC 64 bit with DB2 UDB.
You help in this regard would be greatly appreciated.
Thanks,
Ramakrishna Reddy

Hi,
Please check if this link can help you:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/40f20b67-b011-2a10-f884-f6f004b1a639#section6 [original link is broken]
Regards,
Deepika.

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.
I'm using XP Pro.

You can find search engines on the Mycroft Project website.
* http://mycroft.mozdev.org/
* http://mycroft.mozdev.org/google-search-plugins.html

Is it possible to change the color of imported art in pages, say from B&W to a color? ... or even to make it a gradation of color?

Is it possible to change the color of imported art in pages, say from B&W to a color? ... or even to make it a gradation of color?

Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
or
Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
Peter

Is this possible in TIDAL , Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual

1) Shutdown the Domino server (Lotus Domino Server (LotusDominoData) service)
2) Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual'
3) Reboot the server
4) Defragment the drive (D:\ or F:\)
5) Change the Lotus Domino Server (LotusDominoData) service Startup type from 'Manual' to 'Automatic'
6) Reboot the server
Any help would be appreciated.

Binu - are you wanting to automate this process with TES?
There is a windows cmd command "net stop" and "net start" you can use to stop and start a service.
You will need to work with your windows admin or look online for a command line way to change the service to manual and to start the defrag.
There is a shutdown command that can be run from cmd. It has a switch to force the reboot.
You might also check out scripting with WMI.
Hope this helps,
Michelle

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English? The app was downloaded in Spain.

Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English? The app was purchased in Spain and I am living in spain temporarily

Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

How to change the format of a date field inheriting format from subclass.

Currenctlty date filed is inheriting the format from a property class. The date format in my property class is 'dd/mm/rrrr'.
Now my requirement is to change the format mask according to my applications user from 'dd/mm/rrrr/ to 'dd/mon/rrrr'.
Some may use 'dd/mm/rrrr' and some may use 'dd/mon/yyyy'.
Thanks.

Some may use 'dd/mm/rrrr' and some may use 'dd/mon/yyyy'.
I want a generic solution to change the date format at runtime These two seem to conflict. How will you decide which one to change and which not?

TS3771 Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

It may be because of your settings. You can modify that setting in System Preferences > Trackpad. Another way of making right-click is to click the app icon while holding the Control key

Today my friend dropped my ipod nano 6g and the screen broked. Have one chance to change the screen?? Where? I'm from Brazil.

Today my friend dropped my ipod nano 6g and the screen broked. Have one chance to change the screen?? Where? I'm from Brazil.

Apple will not just "give" you a new one. Apple will replace the iPod for their standard out-of-warranty replacement charge:
http://www.apple.com/support/ipod/service/faq/
The replacement may be refurbished or new, at Apple's discretion, and there will be no way for you to tell the difference.
Regards.

Changing the pre-installed language

Hi,
I am pretty sure you have already dealt with this problem and hope that you will help me.
I bought asha 302 in czech republic, and somebody very, very clever had set czech language to the factory settings. That means, I can change the language for menus and stuff, but when i want to write a message, under the keys designed for @, + and others are czech signs like řžýčš. Even when I restart the phone to factory settings, this doesnt change. So my question is: I need original english firmware installed instead of this one, but I really couldnt find this one online. Or maybe the problem is elsewhere and all could be done somewhat else. And I do not use windows, so no nokia pc suite, please. Or maybe it would be the best to go to nokia service store and get that done.
Kostroun

nothing can be done here or thru Nokia Suite, so you will need to visit your local Nokia Care where they will be able to advise you of your options: http://nokia.com/support

MCRM_SETTINGS report cant change the already existing consumer

Hi Middleware gurus,
I have a problem in setting up of CRM middleware setup with ECC . The scenario is ECC is connected to CRM already and data is transferred, so as a result of that for all the objects in CRM the default consumer is CRM. And now due to some requirements , i want to connect this same CRM system to another ECC and so the requirement is to change this already existing default consumer to a new consumer as per the new ECC system.
SO, I ran the report MCRM_SETTINGS to change the consumer but the result says- the object is already a consumer.
So, now the question is - cant i over write the already existing consume to a new consumer...
Regards,
Neni.

Hello Neni,
In case you want to connect 1 CRM to 2 ECC systems, you'd be following a MEP(Multiple Exchange Projects) scenario and not a MCRM setting so MCRM_SETTINGS won't be useful here.
Or do you want to disconnect the first ECC and connect a new ECC to the same CRM?
can you please clarify?
BR,
Rohit

Changing the already given actionscript

I have two action scripts in which i have to change the following, but im still unsure what parts I need to edit and what i should write instead
1. position the first main circle in the centre of the stage;
2. set all drawing colours for circles to random shades of green;
3. set all drawing colours for branches to black;
4. give each circle 3 branches instead of 2;
5. replace all circles with squares using what would have been the circle's radius as the square's width;
6. stop the automatic animating rotation and only have the objects rotate when the space bar is held down.
package
import flash.display.Sprite;
public class Branch extends Sprite
   var theTree:Tree;
   var level:Number;
   var children:Array;
   public function Branch (controller:Tree, l:Number)
      theTree = controller;
      level = l;
      var myColour:Number = Math.floor(Math.random()*0xFFFFFF);
      var rad:Number = (theTree.maxlevel - level) * 10;
      var linelen:Number = (theTree.maxlevel - level) * 30;
      var lineweight:Number = (theTree.maxlevel - level);
      this.graphics.beginFill(myColour);
      this.graphics.drawSquare(0, 0, rad);
      this.graphics.endFill();
      this.graphics.beginFill(myColour);
      this.graphics.drawSquare(0, -linelen, rad);
      this.graphics.endFill();
      this.graphics.moveTo(0,0);
      this.graphics.lineStyle(lineweight, myColour);
      this.graphics.lineTo(0, -linelen);
      if (level < theTree.maxlevel)
         children = new Array();
for (var x:Number = 0; x < theTree.children; x++)
            var childBranch:Branch = new Branch(theTree, level+1);
            childBranch.x = 0;
            childBranch.y = -linelen;
            addChild(childBranch);
            children.push(childBranch);
      this.rotation = Math.floor(Math.random() * 360) - 180;
public function update()
   if (children)
      for each (var child in children) { child.update(); }
   this.rotation += 1;
function keyPressed(event:KeyboardEvent):void
if(event.keyCode == Keyboard.SPACE)
package
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.utils.Timer;
import flash.events.TimerEvent;
public class Tree extends MovieClip
   var children:Number = 2;
   var maxlevel:Number = 5;
   var trunk:Branch;
var timer:Timer;
   public function Tree ()
      trunk = new Branch(this, 1);
      trunk.x = 200;
      trunk.y = 200;
      addChild(trunk);
timer = new Timer(10);
         timer.addEventListener(TimerEvent.TIMER, controlLoop);
         timer.start();
function controlLoop(event:TimerEvent):void
        trunk.update();

(that sounds like your homework.)

Change the already installed Win 8.1 BIOS mode from Legacy to UEFI

Similar Messages

Maybe you are looking for