Change the asset class

Hi ,
I want to change the asset class when a root level WBS element is released based on the profit center group  (of a Requestesd profit center) for a company code in CJ20N  tcode. Pls suggest me  how to approach it  ?
Thanks in advance.

hi,
       go in as02 and do your work.
WithRegards,
Sulabh Agrawal

Similar Messages

  • Changing an asset class determination account

    I have an asset class numer 233 this class has a determination acount numer 1 configured in its class master record. One asset was created using tx as91 with this class and 6 months depreciation was run (tx AFAB).
    Now I need to change the asset class account determination from 1 to 2. Is this posible ?, how ?.

    One you have assets with postings in an asset class you can no longer change the account determination.
    As an alternative you can create a new asset class with the correct/new account determination.  Than you can transfer the assets from the existing asset class to the new one using transaction code ABUMN.  If you have many assets to transfer than you can use the mass change functionality.

  • I want change my asset class

    HI gurus..
    I created one asset class but my asset class comes under different company code, i want chage my company code:
    Ex: i careted one asset class it will comes under Company code: 0108, but that asset class i want change under Company code 0101. i configure all account determination, Screen layout, number rages.
    i have 3 company codes, If i created one asset class..that asset class comes under which company code.. how the system will recongnise..and howto change.
    Ashok

    Hi Anil
    Notice that asset classes are independent of the chart of depreciation and of the company code.
    I guess what you need is proper configuration in transaction ANK1. This is the online documentation on this IMG step:
    Generally, the control specifications (the screen layout and the account determination) for the asset class applies throughout the client, that is, for all charts of depreciation. It is therefore sufficient to make control specifications once per asset class.
    You only need to carry out this step, if, contrary to the usual case, you want these control specifications to be country-specific (that is, different depending on the chart of depreciation). The system then uses the entries you make here depending on the chart of depreciation in the given company code. The system then ignores the control specifications in the asset class that are independent of the chart of depreciation.
    Regards
    Javier

  • Error occur while doing Determination the dep. area in the asset class

    Hi All
    Query about FI - AA
    when I m trying to do determine depreciation area in the asset class with following path
    Path in IMG
    FA- AA- Valuation-- Determine depreciation area in the asset class
    By following above path and my Asset class as soon as I select my Asset class and click on depreciation area Tab at left side I m heading with below error:
    *"Contact your system administrator (Table error)"*
    I don't have De.area 02 in my chart of depreciation and I don't want to maintain it. I just want to maintain Area 01 and 15
    expecting expert opinion and feed back,
    Thnx
    B

    Hi,
    Please select the Depreciation Area, which you don't want to maintain for depreciation.
    And delete the selected depreciation areas.
    Thanks & Regards,
    S. Umamageshwaran

  • Change the valuation class of material [Stock transport order scenario]

    Dears,
    Client would like to change the valuation class of material.
    There is no open Purchase order/Process order/Purchase requistion and stock in plant.
    Scenario- One Stock transport order is created.
    For same goods issue (351-issuing plant) and goods receipt (101-receiving plant) is done.
    When we are going to change the valuation class of said material, message is "purchase order is open
    and it shows the no of STO [for which receipt and issue is done]"
    To resolve this issue we had first delete the STO line item no(ME22N). Then change the valuation class.
    (this allows). and then undelete the STO line item. Through this we can change the valuation class of material.
    Please advise in such business process that this is right way or there may be other option.
    Thanks & Regards
    Rajan

    rajanshah219,
    Here's my take on how to fix:
    *Manually change Config TCode OMT4 - change message MM 326 & 327 to type "W"   (if open order exists...now you can enter through warning messages)
    *If inventory exists, then issue out of stock to a cost center
    *Change valuation class
    *Put stock back into inventory (reverse to that same cost center)  Note issue out and reverse back into inventory must happen in the same posting period.
    **Valuation class should be changed as expected
    **Manually change config  TCode OMT4 - change message MM 326 & 327 back to type "E"
    Thanks,
    Jason

  • How to change the Development Class of the SAPSCRIPT FORM

    Hi All,
          I have transported the old form which needs to be deleted in Test System. Is that possible to create a TR for deletion and send it to Test enivronment?..
         Also is it possible to change the development class for a form?
         Please help me on this. Urgent!...
    Regards,
    Ramkumar.

    Yes, it is possible to change the development class for forms..
    Use SE03, transport organiser tools
    goto node OBJECT DIRECTORY ENTRY
    select node "Change object directory entries"
    Execute
    goto the next text box after data element, type FORM, give your SAPSCRIPT form name and tick the check box execute... now rightclick on your form and chenge development class..
    Now coming to your second question is is not possible to delete a FORM that it is already transported to QA and Production, only way to do this is by doing client copy.. basis will do it for you..
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Not able to change the Valuation class of a Material

    Hi Team,
    I am not able to change the Valuation class of a Material even if the stock is zero.
    Please assist.
    Thanks in advance.
    Chetan

    Hi Chetan,
    Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
    Thanks,
    Ninad

  • How to change the dev class ttached to a sapscript layout

    Hi ,
             i am trying to change the dev class for the layout. is there any way. In Administation button the dev classs is coming in dispaly mode.
    Also is there any way to delete a layout.

    Hi,
    change the dev class ttached to a sapscript layoutYou can use standard program RSWBO052 to change development class.
    R3TR DTEL Data Element
    Next blank line
    Click FORM = <script_name>
    F8 9 Execute -> double click and change the class
    Also you can check this link.
    http://www.sapgenie.com/abap/tips_and_tricks.htm#How_to_change_development_class_of_a_SAPscript
    Hope this will help.
    Regards,
    Raj.

  • Changing the development class for 0CALMONTH

    Hi we upgraded from BW3.5 to 7.0 and we are getting the same error from the thread :  Unable to change development class because field is greyed out
    Does anyone know how this problem was resolved.
    Regards,
    Brian
    I am changing the development class for 0CALMONTH and for some reason I am not able to change the $TMP to ZBW because it is greyed out. I also noticed the Orginal system field is SAP and not our BWD name and the Orginal language is DE and not EN.
    How would I change the development class for this IO? I am perplexed how this got to this status. When I collected the 0CALMONTH afterwards and listed the IOs belong to 0CALMONTH, I was able to change the development class. Why is this being greyed out?

    Changing while signed on in DE did not work.   - I also tried changing the person reponsible and get the following 
    Local private objects cannot be repaired
    Message no. TR229
    Diagnosis
    Every user of the SAP System can access and change local private
    objects using the ABAP/4 Development Workbench.
    System Response
    Setting the repair flag is rejected.

  • Change the Development class in the Report

    Hi
    I want to change the deelopment class for and Report.bcoz the existing Development class dose not exist.
    I need to change can any one help.
    Thanks,
    Nelson

    Hi Nelson
    If it is a custom Program then you just go to SE38
    and display the table then In Menu bar you can find Go to------Object Directory Entry
    Option
    In that click change button then assign Required Package then activate
    or
    Goto SE80
    Select Package from dropdown
    Give the Package name and click on display icon
    expand the dictionary structures
    Right click on ur table name and change the package name and activate it
    Regards Rk

  • Differentiating the asset class for group assets

    Hi,
    I want to create group assets in AS21. For creating group assets I want to create a seperate asset class. I could not find any option of differentiating the asset class for group assets in transaction OAOA (i.e., Define Asset Class)
    How we can identify that an asset class can be used only for group assets and not for individual assets.

    <<Plagiarised from http://help.sap.com/saphelp_45b/helpdata/en/4f/71dfff448011d189f00000e81ddfac/content.htm>>
    HI
    A group asset is represented in the system by a separate master record. The structure of this master record corresponds to the structure of the normal asset master record. You can determine the structure of this master record using screen layout control, just as you do for normal master records. Just the same as a normal asset, a group asset can have any number of sub-numbers. In this way it is possible, for example, to collect all the acquisitions for one year in a single sub-number master record at the level of the group asset.
    There is a separate master data transaction for creating group assets (Asset ® Create ® Group asset). This transaction corresponds to the transaction for creating normal assets. However, there are certain special considerations to keep in mind for master data maintenance of group assets:
    Group assets can only be deleted when all the assets belonging to them have been marked for deletion.
    Group assets can only manage depreciation areas that have been specially marked. You mark them using an indicator in the company code specific specifications for the depreciation area (FI-AA Customizing: Specify depreciation areas for group assets).
    Group assets have to be assigned to an asset class, just as normal assets do. You use an indicator in the asset class to specify that the class can be used only for group assets.
    Assignment of an Asset to a Group Asset
    You can assign an asset to a group asset by specific depreciation areas. For this purpose, there is a special field in the asset master record (in the detail display of each depreciation area). You enter the number of the group asset in this field. Once this entry is made, the system calculates and posts the depreciation for this depreciation area only at the level of the group asset. In this way, you can also assign one asset to different group assets in different depreciation areas.
    Regards,
    Amit SHinde
    Acknowledge If satisfied
    Edited by: Matt on Feb 17, 2012 9:34 AM

  • Change the Message class (OB28) for validations

    Hi Experts,
    I was trying to change the Message class (OB28) for validations which are created last 1 year ago, as we have two Validations where each validation has 15 to 16 steps in it. One validation starts with Y & another with Z.  Both are using the same message class as of now.
    But we want to use different message class for validation which starts from Z.  We tried changing from program RGUGBR28 but it will change the message class for the both validation which starts from Y & Z, we need to change to only one validation.
    Please let me know any way out for this.
    Thanks & regards,
    Shilpa

    Hi Shilpa,
    The message class during the maintenance of a validation, it is not changeable because the message class is not attached at the individual validation but at the entire validation class, that is a combination of application and call time.
    During the first creation of a validation at the moment of "document line item" in application "cost accounting" the message class is asked for and these then for the entire validation class, stored in this case "001" in the table GB02C and from now is no more changeable.
    The reason for that is, that a change affects all validation of a grade just globally and that even cross-client, since the GB02C is not client-specific.
    I hope this helps.
    Regards
    Ravinagh Boni

  • Check the asset class - ABUMN / ABT1N

    Hi all,
    I would like to know if it's possible to create an asset class control by executing the ABUMN & ABT1N ?
    I need to check if if the asset class of the origin asset and the target asset are the same.
    thanks in advance for your help !

    Hi,
    For this check during ABUMN or ABT1N, you must have been developed a validation at asset accounting document level through transaction GGB0 within AA module.
    In general the transaction ABUMN is meant for transfer within company code (means one asset class to another)
    Thanks
    Srinu

  • How to change the development class for a Layoutset

    Hi Experts,
    I have to Change the Development Class For a Layout which is under Local object now ($tmp) ,how to do it.
    after Changing to Development Class new ,while transportation any issues will come ?
    Thanks in Advance,
    Regards,
    Hitu.

    goto SE03 and change the development class, no transport issues will come...
    or
    execute report RSWBO052.
    Add FORM in blank field under R3TR DTEL, mark field and put your sapscript name, then execute. In Tree double click over sapscript name, and change development class $TMP.
    Regards,
    SaiRam

  • Change the asset acq value (can be + or -)

    Hi All,
    My client wants to reverse deri. and change the asset acq value (can be + or -) and then recalculate deri.
    I got this but not sure, pls suggest
    I can use
    ABSO
    ABCO
    AR29N
    F-90
    Note: All assets are old we want impact in current year only as BS is closed for last year.
    Thanks,
    Vishal

    OK - let me summerise my activities
    1. ABSO - post with tran type 140 for all assets
    entry posted per assets
    Assets - 70 (DR)
    Assets ACQ clearinf account Balance sheet account 50(CR)
    2. Check in AW01N value update
    3. change derisiation method - system will post adjestments for current open year in next deri run AFAB
    I have no idea about AR29N why we use it. Can we use same T code insted of ABSO. AR29N we need to create new deri area which will keep it seprate.
    Thanks,
    Vishal

Maybe you are looking for