Change the battery pack

I have seen many people with this issue - I have a powershot ELPH 530HS and it has been working with no issues. Recently it started giving an error stating that i should "change the battery pack". This is a fairly new camera and i doubt the battery is faulty. Anyone seen this issue? How did you fix it?

You may need to let the rechargeable battery pack go completely dead before recharging. Some of the batteries get a "memory" if they get charged too often when they are not completely depleted of energy, and then won't fully charge. Use the battery pack until the camera just won't operate anymore, then try a recharge. There is a remote possibility that the battery contacts in the charger are not making proper contact, so just make sure the contacts on the battery pack and the charger are clean before plugging everything in.
Steve M.

Similar Messages

How do i change the battery icon to a percentage icon

how do i change the battery icon to a percentage icon

Settings -> General -> Usage -> Battery Percentage (ON)

Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
Thanks for answer

If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery. Therefore you will lose everything that is not backed up. If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

My aluminum remote for Apple TV no longer seems to connect to the Apple TV receiver; I've changed the battery, but w/o success

My aluminum remote does not appear to connect with the Apple TV receiver; I've changed the battery. I can turn on the Apple TV and the opening screen comes up, but the remote doesn't seem to connect...no cursor or movement on the Apple TV screen occurs.

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Changing the Management Pack extensions or items are stored in

I think I know the answer to this but I will ask it anyway. Is it possible to change the Management Pack an extension or an object such as a Queue or Subscription is stored in?
Reason I ask is the person that was maintaining SM before me stored every single form extension, subscription, queue and view etc...in the same Management Pack. I really don't like this particular setup and I am sure its not best practice. I plan to break
out all the above and possibly more into separate newly created Management Packs, like a separate one for Views, a separate one for Subscriptions etc.... Is the only solution to delete the existing item and create a new one with the same details including
the display name?

You can, but not as easily as you would like.
Essentially, what you would need to do is split up the the XML by hand, making sure to sort out the DisplayStrings sections to the correct components. Export out the "main" MP, cut out a section of XML that represents the form extension, paste
it into a new file with a new name, add a reference to the new MP to the main MP, and replace all references to that object with MP Aliases to that object's new home. Import both the new MP and the reduced "main" MP back into the database.
there are two problems thou:
Some objects, like projections (used in form extensions created by the authoring too) and class extensions should only ever be stored in sealed MPs, because removing them causes data that reference them to be invalid, i.e. properties defined in class extensions
are lost if that class extension is removed and re-added, and templates that depend on projections are inaccessable if the projection they are based on is lost.
some atomic SDK objects, like workflows, consist of several non-consecutive XML sections, meaning you would need to trace the references and identify which of many <Rule> and <Action> sections belonged with which workflows, and make sure they
would all end up in the same MP.
now you could do this slowly, pulling sections out of the "main" MP and replacing them with references over various nightly downtimes, exporting the "main" MP and carving out a few objects, then importing the trimmed down "main"
MP and the new single use MP until you had something resembling best practice functional isolation (all Change request notification over here, all service request workflows over there, etc), and the hollowed out husk of your "main" MP as a miscellaneous
container, but i think you'll find that you still have to face and deal with data loss and breakage, potentially a lot more trouble then it's worth.
Given that, i would instead propose that you give up on correcting sins of the past, and start doing it right now. start setting up your new MPs and put new thingss into them, and while you're working, anything that you can easily rebuild. Make a plan to
rebuild your templates and form customization. start identifying class extensions you'll have to rebuild, and work up a plan to export data defined by them somewhere (probably powershell and CSV) so you can restore it when the classes are restored.
Like most data hygine problems, there isn't an easy bulk application answer. you just have to look at everything and clean it up as you go. you can mix salt and sugar quite easily. UNmixing them is a lot more work.

TS3048 I changed the battery in my wireless keyboard and checked the batteries to make sure that they work. When I returned to my computer (the computer was already on) the keyboard would not work, no response at all. What do I do?

I changed the battery in my wireless keyboard and checked the batteries to make sure that they are good, I left the computer on while I changed the batteries. When I returned to the computer, the computer does not acknowledge the keyboard so I can't do any diagnostics. What do I do?

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

T43p - Mouse pointer freezes after changing the battery to a new one

Hello,
I have bought a new battery for my IBM Thinkpad T43p. In the description of the new battery I have seen that this battery is compatible with T43 series. Battery details are: DC 10.8V 5200mAh/56Wh. Replace: 08K8214.
My problem is:
I have ordered a new battery for my Thinkpad T43p but when I turned off the notebook and replace the old battery with the new one the notebook became strange. I use Windows XP Prof on this computer and when the login screen appeared and during I was typing my user name and password the mouse pointer was freezed and I had to turn off the computer. It was happened within approx 1 minute after the Login screen appeared. The symptom was the same with or without plugged in AC charger. I have tried several times and the same behavior was happened. When I changed back the old battery the computer became normal again without any freezing. The fan was working properly in both cases. The symptom is the same if I change the battery during AC charging and using Windows.
I don't have an idea about the reason of it. Can you help me with ideas?
Thanks in advance,
Slider

Pull the battery out and run the machine on AC only. Does it freeze now?
If it doesn't, the "new" battery needs to be replaced.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

How to change the langage pack in the N958GB ?

How to change the langage pack in the N958GB ?
I bought this N95 8GB in greece and it has only greek/english
How to put french/english ?

You have taken the handset to a part of the world for which it was not intended.
Your only option is to take the phone to a local Nokia Care Point, explain that you bought the phone in Greece and ask them to install a French language pack. They may charge you for this.
Also note that your French language pack will be erased whenever you update the phone's firmware and possibly when you perform a reset as well.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How to change the battery in my bluetooth

i got the new one but don't want to harm the case to change it.a little help please.

Hmm, a quick scan over the manual does not indicate how to change the battery. But their web page has a contact tab which will open your email client to sent them email to [email protected] I suggest you contact them and ask them (a) how to replace the battery and (b) if it is user-replaceable to update their manual accordingly.

Has anyone managed to change the battery in a creative Zen MX

=i bought a 6gb zen MX? in November 2007 and have used it every day since. The battery is now in a sorry state and doesn't hold a charge for more than about 4 hours. After fully charging it, if you then leave it overnight the battery almost totally depletes. The battery is definitely a goner. Has anyone opened one of these players, changed the battery and then got the thing back together successfully? I've looked around on the net but can't find any info on how i might open the player to insert a new battery. Meanwhile i've bought a new Creative ZenMX but i prefer the old one with its dedicated slider for on/off and lock and it would be great if i could somehow get a new battery into it.
I still have my old Ceati've Zen Jukeboxes (30gb and 60gb) and i wore a couple of batteries out in those. But all you had to do was open the player and shove in a new battery. Shame that facility no longer exists in Creative's MP3 players.
Any help on the issue of replacing the battery in an MX would be much appreciated.

Re: has anyone managed to change the battery in a creative Zen MX%Thanks for the links Bertwin, much appreciated.
Now i have a problem in obtaining a replacement battery. Back in the day you could phone Creative (in Ireland) and order replacement batteries but alas, no longer. On the net you can easily find replacement batteries for every Creative player.....except for the Zen MX. ? The replacement x-fi battery looks similar? and has the same wire connections but it is 3.7v as opposed to 3.6v in the MX. Also the x-fi battery is rated at? 550mAh while the MX is rated at 0.55AH. (Though i guess that could mean they are the same capacity only it's written differently)
The Creative part number for the MX battery is BAC0603R79925 and the Creative Model No is : LPC6333445
If anyone knows where to obtain this battery please post.

How do you change the battery in an ipad?

I haven't had a problem with the battery on my Ipad Air as yet but was wondering how you would change the battery if needed?

There are no user serviceable parts in an iPad. Take the iPad into Apple for evaluation if
there is a problem. If needed, Apple can replace the battery for $99.00 US. Click here
for details.
https://www.apple.com/support/ipad/repair/battery-power/

How do you change the battery in an Apple TV remote

How do you change the battery in an Apple TV remote

There are no user serviceable parts in an iPad. Take the iPad into Apple for evaluation if
there is a problem. If needed, Apple can replace the battery for $99.00 US. Click here
for details.
https://www.apple.com/support/ipad/repair/battery-power/

How to change the battery in the imac wireless keyboard

how to change the battery in the imac wireless keyboard?

FYI, there is no "iMac" wireless keyboard.
If you have an Apple Bluetooth KB, simply remove the plug (screws out) on the left top side of the KB.
Barry

HT3176 my apple remote will not link to my appletv even after changing the battery

my apple remote will not link to my appletv even after changing the battery. can anyone help?

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Is it safe to always keep the PC plugged in after removing the battery pack?

As I'm not going to move my pc for some time, I have removed the battery pack and use the AC power instead.
But I would like to know whether its safe to keep it plugged into the AC 24/7? and does it consume energy or does it damage anything when the pc is switched off?
T400 2764CTO, Win 7 Ultimate 64-bit
Solved!
Go to Solution.

its okay, i use to do it all the time with other thinkpads when my battery died on me. It won't damage your laptop.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Change the battery pack

Similar Messages

Maybe you are looking for