Change the capture time.

I own a Sony camera with GPS and I use the characteristic to adjust the camera time in relation with the time zone. It is very useful because I can complement the pictures taken with my Nikon DSLR when they have been imported with Lightroom as I organize and rename them with the capture time.
The problem is that Sri Lanka, where I shoot my last pictures has, as India, a half time zone and the Sony do not take into account this special event and I didn’t realize it, so my Sony thought that I was in Dacca and not in Colombo: 30 minutes less.
As result of this situation my pictures have the wrong time and when I import them are wrong placed.
I have found the way to change the capture time with Lightroom but the modification is performed in the catalogue only and not in the EXFIF data as the Sony pictures are JPEG.
Please, is there any way to solve my problem with Lightroom?
Thanking in advance

John, thanks again.
I had forgotten the special behaviour of the Lightroom with the grid view and I had selected the loupe view. In any case I executed the change with the second option that you suggested. By the way, I think that it is a dangerous setting because you can mistake a tag when imported and you can solve the mistake easily in Lightroom (with grid view, of course) but with a lot of work in the windows explorer.
Thank you very much for your help.

Similar Messages

Batch changes to capture time

I noticed today after much confusion that changes to the capture time of multiple images could only be made in the grid view. I was trying to change the capture time of a full folder of images, I was in Loupe view but with all of the images selected in the film strip. It kept changing the capture time on only one image at a time no matter how many images I selected in the film strip.
My question is this, is the requirement to be in grid view some thing that any one else has noticed? Is this deliberate? It caused me quite a lot of confusion until I figured out what was going on.

Thanks for confirming that.
I have made bulk changes before and just never noticed that limitation. I have seen many people give tutorials or type instruction for that kind of thing too and it was never mentioned that they had to switch to grid view, its always just assumed that's where they are starting from, which I guess is why it took me so long to figure out what the problem was this time.

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

Is there a way to change the specific time when subscriptions to podcasts are downloaded? I seem to be locked in to 6:29 pm.
Thanks.

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

I am trying to change the display time in Captivate 5...

When I try to shorten the length of a slide either in properties or by clicking the end and dragging it, like in Captivate 4, it keeps going back to the original time. Normally I record a demonstration and when I am done adding the effects and the voice I have to shorten or lengthen a slide, but I am unable to do this in CP5. Please help.

Hello,
If the slide is longer than 3 sec you can change the 'Display time' in the Properties panel, General section too. But here you cannot get below 3 sec. Dragging in the timeline allows me to go below 3 sec, but you have first to shorten the timeline of the objects before you can change the duration of the slide. To be sure I just tried again and was able to get to a minimum time of 0.1 sec with that workflow. In the screenshot it is 0.3 sec. If you have FMR, video or audio however the duration of that object will be responsable for the duration of the slide.
Hope it works for you too, cannot explain why it is not possible with the Properties panel, which will show correctly the duration after you changed it with the Timeline.
Lilybiri

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

How to change the screen time on 2330c.....

is there any option to change the screen time from center to a top end.....?
Solved!
Go to Solution.

Date and timeSelect Menu > Settings > Date and time.To set the date and time, select Date and time settings.To set the formats for date and time, select Date and time format settings.To set the phone to update the time and date automatically according to the current
time zone, select Auto-update of date & time (network service).
here is online guide which may contain more info
http://nds1.nokia.com/phones/files/guides/Nokia_2330_classic_en.pdf
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Changing the run-time menu programatically

Hi All
I am developing an application which will be a bilingual. when i click french button on GUI, all display messages changes to french. When i click on English, all captions and messages come in Engilsh. I am using property node to change the captions of controls and graphs for different languages. and using a global variable to pass the language information between different windows(Sub VIs). Now the problem is, i have to change the Run-Time Menu also. Not getting how to do this. Can anyone help me about this. Is it possible to make this?
Thanks
Anil

Hi Anil,
It looks like you are on the right track by using Property Nodes. You can use the string input of the property node to select the appropriate message to display (language), along with a Boolean selector (ie: TRUE = English, FALSE = French (or vice-versa) ).
You could also use a Property Node for the language selection.
JLV

DMP-4400G How can I change the local time

Hi,
Recently I installed DMS 5.0.2 and DMP-4400G for Digital Signage. Now I am running a Flash application that is embedded into a HTML page, but sometimes the DMP does not show the content of the flash, the LCD shows a temporary error; this error never occurs when I use a standard PC with any Internet browser to display the same content. The webmaster says that DMP does not have an updated time and date. Do you know how to change the local time and date of the DMP-4400G.
Thanks for your help.

Jhon,
There are couple of things...
1. The DMP 4400G has a internal clock but at this time there is no way to change the date & time on the DMP 4400G.
What does the date & time have to do with the Flash Content anyway?
2. What version & type of Flash is being used for this embedded Flash content? Is the correct version selected & configured on the DMP?
Cheers!
T.

Changing the System time in the JVM where Weblogic runs

Hi,
I am trying to change the System time where the Web-logic server (11g) runs using Mocking. I use "jmockit.jar" to mock the System.class. A Spring bean is created and through that I try to change the System time. I need to change the time for testing scenarios. For example, I need to backdate and do the testing for some scenarios. For the moment I do this manually and I want to automate this by changing only the time in the JVM where the application server runs. When I try to automate this using the Spring bean, I get an error as follows. Do anyone have any idea about this.
[WLServer adminserver] Exception in thread "Timer-5" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "DynamicListenThread[Default]" java.lang.IllegalArgumentException: No class with name "com.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.logging.LogRecord.<init>(LogRecord.java:139)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:33)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:48)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:70)
[WLServer adminserver] at weblogic.logging.WLLogRecord.<init>(WLLogRecord.java:63)
[WLServer adminserver] at weblogic.logging.JDKLoggerFactory.createBaseLogRecord(JDKLoggerFactory.java:74)
[WLServer adminserver] at com.bea.logging.LoggingService.log(LoggingService.java:216)
[WLServer adminserver] at weblogic.server.ServerLogger.logListenThreadFailure(ServerLogger.java:205)
[WLServer adminserver] at weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:197)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "weblogic.timers.TimerThread" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:256)
[WLServer adminserver] Exception in thread "Timer-4" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-1" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-2" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "weblogic.time.TimeEventGenerator" java.util.MissingResourceException: Can't locate bundle for class 'weblogic.common.T3MiscLogLocalizer'
[WLServer adminserver] at weblogic.i18ntools.L10nLookup.getLocalizer(L10nLookup.java:427)
[WLServer adminserver] at weblogic.i18n.logging.CatalogMessage.<init>(CatalogMessage.java:47)
[WLServer adminserver] at weblogic.common.T3MiscLogger.logThrowable(T3MiscLogger.java:325)
[WLServer adminserver] at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:126)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
OR
Do anyone know any other way to overcome this issue using some other mocking jar.
Thanks
Edited by: 913136 on Feb 8, 2012 2:32 AM

Hi,
I could manage to change the time in JVM where the Weblogic server runs. I loaded an Spring bean from my Test class and from that bean I set an offset (to shift the time) in the Mock class (say, MockSystem class). In this case I used the jmockit implementation for instrumentation purposes. The MockSystem class should not be instantiated by us and jmockit takes care of that part. What I had to do was defining the javaagent and another parameter ("-Djmockit-mocks=com.abc.common.service.impl.MockSystem") in the Weblogic server build XML (mentioned in the following URL[1]). But to work this the MockSystem.class file should be wrapped in a JAR file and included in Weblogic server/lib directory and define it in the Weblogic build XML file as a classpath. For more explanations visit this URL [2].
[1]. http://jmockit.googlecode.com/svn/trunk/www/javadoc/mockit/Mockit.html#setUpStartupMocks%28java.lang.Object...%29
[2]. http://code.google.com/p/jmockit/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Tool%20Type%20Status%20Priority%20Summary&groupby=&sort=&id=207
Thanks
-thiwanka-

How to change the defrag times

Can you change the defragmentation times because i dont want to leave my laptop on all night?

MartyFromTauranga wrote:
Can you change the defragmentation times because i dont want to leave my laptop on all night?
There is no need to leave the MBook on over night. There are a couple of clean-up-scripts starting if the system is idle (cpu usage is under a specific value) and if system starts up / shoot down.
If you (like I do) let the system run for weeks, by only putting the Mac to sleep state, it could be necesary to let the Mac run to idle state (first close all unneeded applications) every two weeks or so for a while.
The HFS+ filesystem needs no "defrag" as HFS+ optimizes the filestructure "on the fly" when deleting or adding files to the drive.
HFS+ uses a number of optimizations to the allocation algorithms in an attempt to defragment files while they are being accessed without a separate defragmenter.
If (very unlikely in normal operations) the filesystem does become fragmented, the only way to defragment it is to use a 3rd Party tool; or to wipe the hard drive completely and install the system from scratch.
Cheers - Lupunus

Change the start time of track 1

Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Changing the System Time

I am using a SunBlade 1000 and C++ with Workshop 6.1. I would like to change the system time via a program written in C++ without having to log in as super-user. Is that possible ? I was thinking about using the settimeofday function, but according to the man information I only can use it as super-user.

You are correct. Only root can set the system time. You should
probably consult your local system admin or discuss the implications
of trying to do this in the Solaris forum. There are possible security
holes opened up by trying to do root's job programatically.
In general, a C program can use the system() call to run a command
that would be typed in at the shell. A program can also have the
Set UID bit and run as root, but you should be well aware of the
risks associated with that before you try to use it.

Change the capture time.

Similar Messages

Maybe you are looking for