Change the colour of message bubbles

Is there a way that I can change the colour of my text bubbles. Or will they stay green.. Or is there a way I can customise the colours?

There is no way to change the colour. If you message another using with an iOS device running iOS 5 or later and you are messaging them from an iOS device running iOS 5 or later it will be sent over Apple's iMessages network and the text bubbles will be blue. Just thought I would share that.
B-rock

Similar Messages

In ios7 is there a way to change the colour of a sent text?

Since upgrading to ios7 & on my iphone 5 the sent text messages in a conversation (my messages) are white on green and I don't find it that easy to read when I want to look back over a conversation. I tried making it bold in the Accessibility area of settings but that it no better. Inverting colours gives me a horrible purple. \does any one know if there is anyway I can make the text other than white - black on green would be fine.

Hello again, Helen,
While this doesn't actually change the colour of the mouse pointer, Mouse Locator does make it very easy to spot, even on a large display.
And it's freeware into the bargain!
HTH
Archie

How to change the colour of chart in WAD.

Hi,
I have problem with web report. The web report with bar charts used to show with different colours earlier. Now when I execute the web report, the chart displays in single colour (All the rectangular bars in the charts are displayed in single colour say for example red). customer would like to see the chart with different colours. Please put some lights on it how to change the colour of chart in the report.
Thanks,
Sravan.

Hi Krish,
I have followed the steps which you suggested, but I am unable to see the changes when I execute the web report.
I could able to see the colour changes to the bars in the chart in the preview (i.e when I select the series 1 and change the colour for series 1 under Area properties). Like that I have done for all the 5 series, then I have clicked on Complete button, saved the web template and executed it, and I could able to see the changes in the preview but not in the report after execution.
I have two charts in my case, one is <b>Job function</b> chart and the other is <b>Job type</b> chart. The Job function chart is displaying with different colours from the begining, but the job type chart is displays all the columns in RED colour.
Is there any setting I need to do after selecting the colour at the series level.
Please correctt me if I am worng in doing the procedure.
Please update me how to do it...It is usefull if you can come back to me ASAP .
Thanks,
Saravanan.
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI

How do I change the colour of a PS frame?

I am creating christmas cards and adding photos of my kids onto christmas backgrounds. I am dragging frames from the right hand side but want to change the colour of these frames - can someone please tell me how to do that?
I've worked out how to do it by clicking on the black/white circle and using the hue/saturation but when I go to do that with the frame on the new background, the colour of the background changes instead of the frame. I need to change the frames colour while on the background to get an exact match to what I want (does that make sense???)
Is there an easier way to create a frame for the photos? I also want to create a text box / frame (with the christmas message) with a solid colour background (different to the main background) can anybody tell me how to do that?
An example of what I am trying to do is here http://www.invitations2impress.com/christmas-cards-gift-tags
Thanks in advance )

In a nutshell, you have to simplify the frame layer and erase the interior.
Here are the steps:
Create your background.
Add a new layer:
Drag the frame you want to use onto the editing surface. The frame will come in on its own layer:
Simplify that frame layer:
Choose the Magic Wand Tool and give it these settings:
Click on the interior gray area of the frame with the Magic Wand to select it, and hit your Delete key:
Switch to the Eraser Tool and erase the stuff that's left in the middle:
Select the empty layer (Layer 1 in this example) and use File...Place to place your image on it. The layer name will change to the name of the image. Adjust the size and placement of the image. Your layers will now look like this:
With the frame layer selected, add a Hue/Saturation adjustment layer, making sure to "clip" it to the frame layer. Adjust the sliders to suit:
The final result:
Ken
P.S., Nothing says "Christmas" like laundry and red leopard fur!

What's a polymorphic terminal and why can't I change the colour of an LED?

Hi,
I've written a small vi to experiment with changing the
colour of an LED from the front panel by the user. (See attached.)
I've created a property node for the LED indicator and selected the 'Colors[4]' property.
I've then selected the 0th element of the array using 'Index Array' and used this as the cluster type on 'Bundle By Name' but no names appear in the elements.
When I then try to wire a colour box to the input of Bundle By Name I get a broken wire and the message: "This wire connects to a polymorphic terminal that cannot accept this data type".
And yet when I hold the mouse over the wire from the output of index array so it's just looking at one element of the colors[4] array in the help window I'm told it's a cluster made up of two U32's. Individually these are the same data type as the output from the colour box.
What's a polymorphic data type and what's the correct way to wire from the colour selection box to the Colors[4] property of the LED so the colour can be changed?
Any help much appreciated.
Thanks,
Dave.
Attachments:
LED_colour.vi ‏25 KB

Dave,
A couple of comments.
As CC said, you need to use the plain bundle node.
If you want to change the "ON" color, you need element 1, not zero.
Property operations should only be done exacly once whenever something changes, not 10000 times/second. Use an event structure.
See attached (LabVIEW 7.0). Modify as needed.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LED_colourMOD.vi ‏34 KB

HT3529 New 7.0 version update changes the way text messages are presented. In the new version, I cannot figure out how to delete individual texts. I can delete entire strings of messages, but I want to delete old texts, but keep the recent texts

The new version of the software for my iPhone 4 changed the way text messages are managed.
I can no longer delete individual texts from a text "conversation." I also have not figured out how to forward texts, which I was able to do in the prior version.
Anyone know a way to edit out individual messages without losing the entire string?
Anyone know if there is a way to forward messages?

When you have the conversation open, if you tap & hold on a message bubble, you should get a new menu pop-up. It should have 2 options "Copy" and "More..." If you select the "More..." option it will then let you select one or more message bubbles and delete the selected ones by hitting the trach can icon in the lower left corner. As for forwarding, you probably just select the "Copy" option, then paste the contents into a new message...

Changing the colour of hyperlinks

This is probably a really stupid question but I can't work
this out for the life of me.
I was just wondering how you change the colour of the
hyperlinks so that they are not constantly blue?
Thanks

Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"g-rebel" <[email protected]> wrote in
message
news:gqt6t9$m9m$[email protected]..
> This is probably a really stupid question but I can't
work this out for
> the life of me.
> I was just wondering how you change the colour of the
hyperlinks so that
> they are not constantly blue?
> Thanks

HT201364 since I updated my system to Mavericks my computer colour is always grey. I have tried to change the colour via system preference without any success. What should I do to so that my screen will be colourful?

since I updated my system to Mavericks my computer colour is always grey. I have tried to change the colour via system preference without any success. What should I do to so that my screen will be colourful?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Drag the image file into the editing window to upload it. You can also include text in the reply.

Change the colour of events in iCal

I need to change the colour of events/appointments in the Mac iCal. I have imported all of my Outlook calendar via google sync and all my appointments are now just one colour. I have my medical appointments coloured in orange so they stand out each week (I have many) and all my personal events a different colour, and my volunteer work a different colour so that I can see at a glance in week view what I am up to. Looking at one week with every appointment in one drab colour is not nice.
I notice that different calendars are different colours, but I dont want separate calendars as I need to sync with google to share the calendar with Android phone and iPad.
Please can you let me know how to turn this feature on. Many thanks.

Click calendars at the bottom of the page the click on the i symbol for info and then you can select the colour you'd like.

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

Best way to draw an asset if I want to change the colour of it?

If I draw something manually, can I still change the colour by actionscript?
I want to draw a cat, and the cat colour depends on the the user choice in the previous 'screen'. How should I go about this?
Thanks.

Yes, there are a couple ways. You can use the ColorTransform class. Or you can use one of the Tweening engines - it's really easy to tint objects using TweenLite. You can even test in the demo at http://blog.greensock.com/tweenlite/
Scroll down a bit to the demo... pick a color in the tint box and hit Tween.

How can i change the colour of the keys on my mac? is it possible to get them changed?

i was looking at a macbook i was today and it's keys on the keyboard were in a rainbow formation, with different colours. Is there a way to bring mine in to change the colours of the keys? or did i have to order it like that?

Ask the person who owned the computer or do a Google & Bing search.

Is it possible to change the colour of the highlighted fields in a form? And if so how?

Hi there,
I would like to know how to change the highlighted fields that show up on a form once it has been designed and PDF'd. I know i can turn it on or off but i would like to just change the colour so it matches our styling of the company.
Is there a way to do this and if so how??? If not thats fine i just need to know if there is a way.
Thanks
Jennah

Hi,
What do you mean by travel? Is that when it wont change all settings across the board? e.g another staff member with adobe acrobat wont have the same settings as i do?
I am the only one creating the forms and using any adobe settings anyway so i guess it wont really matter that they dont have the same settings as i do but its not hard to change them on all pc's anyway.
Thanks though.

Is it possible to change the colour of the bars in a chart on the iPad?

I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.

Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
</mx:Grid>

Ical Version 5.0.1 (1547.4) change the colour of an exchange calendar

I have ical version Version 5.0.1 (1547.4) and want to change the colour of the exchange calendar (my work calendar). I have read online about selecting the cal and then click get info and change the colour ut this does not seem to work for an exchange calendar.
Any advice would be great

problem still persists regardless of which user you sign in under.
my Imac is
Software Mac OS X Lion 10.7.2 (11C74)
Safe mode did not make a differebnce as well.
I have read something about running an applescript but i dont really know how to do this and was hoping for an easier solution. Plus dont know the numbers for the different colours

Change the colour of message bubbles

Similar Messages

Maybe you are looking for