Change the configurable material set against a ERP finished product

One of our users has entered the wrong configurable material against a finished product in MARC-STDPD. Is it possible to change this?
Thanks in advance

Hi Pherasath,
I'm not sure how changing the material type will help. What would I change it to and why? I need the material to be a ERP finished product?
I too have noticed the OSS note but wasn't totally sure that it applied to the issue we specifically have, do you think it does?
Regards,
Craig

Similar Messages

  • Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks?

    Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks to leaving the Configure IPv6 setting to Off?

    Nope. You can always reverse that if you choose.

  • How to change the Configuration of Serviceable material in Repair Sales Ord

    Hi,
    I have to change the configuration of the main item of a repair sales order which will have a serviceable material
    for an inbound interface.
    Is there a standard FM or BAPI/RFC available to do so. I tried using CUCB_CHANGE_CONFIGURATION and CUCB_SET_CONFIGURATION but they dont work, meaning they dont raise any exception and sy-subrc is set to zero but still the changes are not reflected once i check it in the transcation.
    Any input is appreciated.
    With thanks in advance,
    Sharath.

    HI,
    If you are using condion record, you can change the value for the required condition type so that it will flow to PO. IF you are not using that, you can change the price at the line item level in PO itself.
    Regards
    Ram

  • I have changed the configuration of the firefox and I want to change it back

    some days ago I have changed the configuration of the my Firefox to have a Firefox with higher speed. But after changing I found that the speed has became slower. I want to change the configuration back to its original setting. Please let me know if there is any way to do it.
    may tanks for your helps.
    MIMLINUX

    Start Firefox in [[Safe Mode]]. When you get to the [https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window Safe Mode window] , select '''Reset all user preferences to Firefox defaults''' and then '''Make Changes and Restart'''. You have to be very careful when a site tells you to change Firefox's settings. It may harm your Firefox.

  • CUP/CUCM IP Address change - how to change the configuration of Jabber/CUPC in batch

    I have an implementation of CUCM / CUP with endpoints Cisco Jabber and CUPC.
    The CUCM/CUP IP address will change.
    Is there a way to change the configuration of Cisco Jabber / CUPC on all devices?
    Regards,
    Ronaldo

    CUPC:
    There is a registry setting that you can specify.
    HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\AdminData\CUPServer
    CUPS
    You will also need to make changes to the CUPS config for the TFTP, CTI gateway and CCMCIP settings.
    Application -> Cisco Jabber/CUPC -> Setttings.
    You'll also need to change the truck settings to CUCM if you have this configured.
    Jabber:
    Not 100% sure on Jabber. Maybe someone else can comment on that.
    Thanks,
    - Colin

  • Costing the production order for the configured material

    We are trying to cost the production order for a configurable item.  But the system is not calculating any cost in the production order.  Sales order related to this configurable material is costed.  What additional setting I need to cost the production order for the configured material ?

    Hi Niki
    If your SO is costed, thats enough from a System's perspective... Planned cost will be the sales order cost estimate because SO saves the Chars required for the Configurable material
    Planned cost in Prod order depends on the Costing variant you have assigned in the order type... Check the error log if there is any error in cost calculation in prod order
    br, Ajay M

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Change the "Packaging material category"

    Hi all,
    I'm unable to create an external handling unit because the material has packaging material category "auxiliary packaging material", and I need to change the packaging material category as "packaging material".
    Message Id: HUSELECT047
    Do you know where can I change it?
    Regards,
    Jaime S.

    My problem has been solved. regards

  • When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Changing the configurations of pre-configured BOM on a Sales Order

    Hello experts,
    Our client's business is similar to OEC Computers. However, I am not able to map the following business scenario:
    They sell servers to customers however, it is unusual that the client buys the pre-configured model as provided by the principal. therefore, as per the specific requirements of customer they change the configuration of the server.
    For e.g. the pre-configured model has 2GB of RAM however, the customer wants to replace the the 2GB RAM with a 4GB RAM.
    The replacement is important to track as Inventory will have an affect on it.
    Please advise the possible solutions.
    Regards

    Hi Adeel,
    At the time of Production order you chane the 4GB RAM Instead of 2GB.
    Traking of the Replacement item you use some Additional query report to be use.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Can anyone say me the Configuration material for the ECC 6.0 FI/CO

    Hi everybody
    Can anyone say me the Configuration material for the ECC 6.0 FI/CO
    thanks n regards
    venuprasad

    Hi
    please refer
    http://www.sap-img.com/
    http://www.surya-padhi.net
    hope this helps
    pushkaraj

  • How do I change the apple id set up on my ipad

    how do I change the apple id set up on my ipad I need to set it up under a new account

    Settings - iTunes & App Stores - Apple ID
    Settings - iCloud - Account
    Don't know if you have to do both of these. You can also do it through iTunes.

  • Changing the Database Character Set  From WE8MSWIN1252 to AR8MSWIN1256

    good morning everybody,
    I need your help to know all step which it is necessary to follow to change the Database Character Set From WE8MSWIN1252 to AR8MSWIN1256
    thank you

    If you have not already done so, read up on Character Set Migration and using the CSSCAN tool to verify the database before making any changes.

  • How to change the standard layout sets in ALV List

    Hi Gurus,
    How to change the standard layout sets in ALV list.
    Is there any standard program ? or specific way to acheive this?
    Kindly drop some clues?Every valuable clues rewarded more points........
    Thanks in Advance,
    Dharani

    Hello Dharani
    All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
    LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
    LVC_VARIANT_EXISTENCE_CHECK
    LVC_VARIANT_F4 (Display variant selection dialog box)
    LVC_VARIANT_SELECT (Read a display variant)
    For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
    Regards,
      Uwe

  • Changing the configuration profile to rolled-out iPads

    I need to change the configuration profile of all the iPads that have been configured in my office due to a sudden request by the management. It's a simple checkbox that I can just tick off in iPhone Configuration Utility. However, how do I apply these changes to the iPads? Do I just update the config profile in the config utility, and it will update itself on plugging in the iPads, or do I have to do something else?
    Thanks!

    I don't think this will be a fun experience...if anyone knows of a better way I hope they will suggest it...but the profiles, to my knowledge, can not be incrementally updated...they have to be removed and replaced with a new profile.  We've found you can add a second profile as long as you do it from the same instance of IPCU that it was installed from ( if profile was encrypted), but I don't believe the 2nd profile will successfully install if it has settings that overlap or conflict with the profile installed first.  I've been told, and I believe that Apple is working on resolving issues like this that affect enterprise users.....if  a way exists to do this in IPCU with an incremental update, I'd like to know about it as well. 

Maybe you are looking for

  • No text appears in my chat box... help!

    My iChat crashed last night, and when I opened it back up, everything seemed to be working -- I could see my status as available, see who was online, etc, but when I try to chat nothing appears but the thought bubble like when you're typing. I can't

  • Lightroom CC not showing up in my creative cloud after repeated log out and log in's

    tried updating to the latest lightroom, but creative cloud not showing Lightroom CC even after repeated log outs and log back in's. Showed up first time on another machine of mine but not my main desktop machine.

  • To make a table data in ill and then save as PDF

    hei, if I want to make kind of table in ill with text data and then exprot/save as.. PDF file, ~2 pages. How large should I take the new ill document width x height ? And if I want to make 2 pages on PDF, is it possible ? And if Im makeing table data

  • Error when applying changes in Form

    I get the following error when saving changes in a form. The Form was created using the Report and Form application. If someone can pls help, I would greatly appreciate it!! ORA-20505: Error in DML: p_rowid=APL11163, p_alt_rowid=transcontrolnum, p_ro

  • My facebook noticication banner don't work?

    It's set in my settings that facebook notifications come up at the top of my screen but they don't why?