Change the content in Benefits participation area

HI,
In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service.
How can I change the text to some other.  Is it comes from Web Dynpro or home page frame work. How can I change it.
This is the text I want to change it.(Participation Overview reflects the benefits you are/were enrolled in as of the date you enter below.  Enter the current date to see a list of the benefits you are currently enrolled in. )
2. Is there any way I can move the plans only to benefits main page.
Regards
Mark

Hi,
In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service.
How can I change the text to some other. Is it comes from Web Dynpro or home page frame work. How can I change it.
This is the text I want to change it.(Participation Overview reflects the benefits you are/were enrolled in as of the date you enter below. Enter the current date to see a list of the benefits you are currently enrolled in.
--> can you provide a screenshot, technical information about the service (name of iview), your system (ehp4 ehp5?) and the architecture you use for Navigation (OBN, HPF?).
2. Is there any way I can move the plans only to benefits main page.
--> can you elaborate more detailed what you want to do? I don't have benefits in my system so I can't verify what you might mean. Screenshot would help as well here.
Cheers, Lukas

Similar Messages

  • I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

    i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

    i inherited the website. It’s for a non-profit and is not very
    sophisticated, and neither am I in webdesign. It currently has multiple
    pages that are identical except for that body section, so whenever i change
    the navigation (in the sidebar) I have to update every html page.  I want
    to have one basic page, and just call in the different body content based
    on the link the user selects from the nav bar. How can i do that using a
    script? i am using Dreamweaver.
    ~ in love and light ~
    Jeannie
    On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

  • How to change the content of GTC (terms and conditions) for Partner

    Hi all,
         We are using R/3 version of ISA B2B site. while creating order thru Shopping Basket we have requirement that We need to provide GTC (General Terms and Condions) for the Partner (View GTC link ).  Right now some default text is displayed in that window (text text text ext text text text text text like that). we need to change this.
    where i can change this text and enter our own terms and conditions.
    Please help me to resolve this,
    thanks in advance
    siva kumar

    Hi Siva,
    the GTC is shown in the JSP b2c/order/terms_and_conditions.jsp. If you have a look at the file, you will find the following code:
    <isa:translate key="b2c.order.termsAndConds.txt.dmy"/>
    The translate tag will render the language dependant text for the resource key "b2c.order.termsAndConds.txt.dmy". To change the content that is shown you can change the resource text or create your own resource key in the corresponding resource file. The resource files are located in the src-folder of the web application DC.
    Best Regards,
    Peter Kraus
    SAP Web Channel Consultant
    http://www.leonardo-it.com

  • Changing the Site URL of a Sharepoint site changes the content type order

    Description
    Changing the Site URL of a Sharepoint site changes the content type order of all lists that
    * contain folder content types
    * and have a custom content type order
    * where a folder content type is the first content type in order.
    Reproducible behaviour
    1. Create a Team Site in Sharepoint
    2. Create a Task List "Test" on the Team Site
    3. Go to List Settings
    4. The Content Type order is by default
        a. Task
        b. Summary Task
    5. Change the Content Type Order to
        a. Summary Task
        b. Task
    6. Go To Site Settings "Title, description and icon"
    7. Change the Site Url
    8. Go To List "Test" List Settings
    9. The Content Type order now is
        a. Task
        b. Summary Task
    10. Select "Change New button order and default content type"
    11. Here, the Content Type order still is
        a. Summary Task
        b. Task
    Is this a bug? Has anyone noticed this behaviour before?
    Kind Regards,
    Joachim

    Hi Joachim,
    You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
    The granularity of change is better by Powershell. But by the interface is most user-friendly.
    Maybe that's the reason of this behavior.
    Gilles Martinez
    Twitter
    Blog
    Please mark as helpful/answer if this resolved your post

  • How can I change the content of JTable?

    Dear friends.
    I have an JTable. I create tablemodel for it and fill out it by data.
    In application at the run time I always need to change the content of whole table. For example I have a frame with JTree and JTable. When I click on the tree node I need to retrieve the data about this node in the JTable.
    Advice me please how can I do that and give an example please.
    Thank you.

    SOL I:
    There solution can be simple if u've written a model for it.
    If u are updating the data of the table by the setValueAt() method of the tableModel, in ur calling(mutating code), then just append a sinle line at the end of the method. U just need to fire a data change event corresponding to the event that has happened.
    void setValueAt(Object aValue, int rowIndex, int columnIndex) {
    - - - - - - - ur code
    //then last line can be
    fireTableDataChanged() ;
    OR
    fireTableCellUpdated(int row, int column);
    OR
    fireTableStructureChanged() ;
    depending uopn what has happened.
    SOL II:
    U may also try calling the method fireTableDataChanged(); from the place where the table data is getting mutated.
    like:
    ((AbstractTableModel) table.getModel()).fireTableDataChanged();
    [email protected]

  • CATS - It is possible to change the content of the Rejection e-mail?

    Hi all,
    we are in ECC 6.0 and have implemented CATS.
    Do you know if it is possible (and how!) to change the content of the e-mail that is sent to the employee in case of CATS rejection?
    Thanks and regards,
    Cristiana

    Hello, nice idea!
    I did figure out that the program use text elements, however, one is not allowed to change them. I then raised an OSS note and SAP raplied that I couldn't change the text elements - I really don't like the email that is sent from CATS rejection!
    I really ike the sound of your idea. I am not familiar with translations though. Would you be able to detail it a bit more about how to translate a text element?
    When I get to the text element screen, if i follow menu path Goto > Translation, a screen pops up asking me to chose a Target Language. What should I do then? Select the target language to EN (the original language is EN) ? And then, how do I make sure that the program uses the translated text?
    Thanks a lot for your help!
    Cheers,
    Cristiana

  • WM-RF: Changing the content of an error message

    Hi,
    may be someone could help me...
    when a user is in a queue, but there are no further TOs in this queue, a message / error is shown:
    "The system could not find transfer order for execution".
    Is it possible to change the content of this message unproblematicly? Where can I change it? Screen-Management??
    Thank you!
    Best regards

    I didnt find the right message number by clicking on it. but i found the error message in se91....
    too easy
    thx a lot...

  • Change the content of a field for a record in table

    Dear guru ,
    i know that there is chance to change the content of a field for a record in table using SE16 for the table involved and debugging.
    Can you explain me the flow to run this ?
    Thanks.

    >
    CONS  SAP wrote:
    > Dear guru ,
    > i know that there is chance to change the content of a field for a record in table using SE16 for the table involved and debugging.
    > Can you explain me the flow to run this ?
    > Thanks.
    Hi CONS SAP,
    You can use se16n transaction. This is very user friendly trnasaction. You may use it like this:
    1) Start transaction SE16n.
    2) Type the table name and press ENTER.
    3) Type the string "&sap_edit" into the command line and press Enter.
    4) Enter your selection criteria and press F8.
    Now you can easily change/delete/add the lines you want and then save.
    All Changes are recorded in the tables SE16N_CD_DATA and SE16N_CD_KEY.
    But I would request you to keep in mind the suggestions from Vijay Babu Dudla
    >
    Vijay Babu Dudla wrote:
    > if you are trying on some test table then it is ok. but don't update any transactional data like that. it is not good practice.
    >
    Many regards,
    Ravi.

  • Can I change the content of a section in config data file use Configuration File VIs of LV?

    There are  few sections in my .ini file, I need to change the content of a section in this .ini file. Are Configuration File VIs in File I/O fuction pallete able to do that?
    Thanks.

    You should be able to.  Open the .ini file, read the key (if it exitst) delete it and write a new key (you might be able to directly overwrite the key but I havent tried this). Close the file with the write file? set to true and you should have modified the .ini file with the config vis.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • How to change the default JRE when there are several version of JRE in Sys

    How to change the default JRE when there are several version of JRE in System?
    i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
    Now the JRE is jdk1.3\bin
    When run class that was compiled with jdk1.5,throw:
    java.lang.UnsupportedClassVersionError
    How can i change the jre to 1.5?

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • How to change the database in a business area

    Hello All,
    I am trying to figure out a way to change the database that a business area connects to. When I created the business area I selected to look at tables from the default database. Now I need to change that setting to connect to a different database. The tables are exactly the same on both databases. I just need to change the database that the business area looks at.
    Is there a simple way of accomplishing this? I want to avoid having to recreate the business area.
    Thank you very much in advanced for your help with this matter.
    Del Benavides.

    Hi,
    Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
    Hope that helps,
    Rod West

  • Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

    I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
    I am also receiving errors while downloading any file like:
    "C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
    Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
    Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
    I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
    == Crash ID(s) ==
    b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

    Please help.
    It is getting worse
    Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
    Please help.

  • When firefox trys to auto update, or I manually download the new version, or some but not all downloads off of the web, I get this error message. C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.

    First off, when firefox trys to auto update, it fails. It tells me to try and download the new version from mozilla's site. When I try to download the new version I get this: (C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.)
    This is the same message I have been getting when I try to download other things off the net. (When I use other browsers to download I dont have this problem)

    Please help.
    It is getting worse
    Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
    Please help.

  • Changing the Content of a Document at creation time using Java

    Hi,
    I made a ClassObject 'Division' that is a subclass of the
    oracle.ifs.beans.Document,
    and I want to change the content of a Division instance while it
    is being created because I can't change the editor (Epic) that
    creates this object.
    (and it has to be at creation time!)
    To do this, I made a server-side class S_Division that
    implements the extendedPreUpdate method.
    I was able to get the content of the object when that method was
    called for the 4th time
    and that way I could change some attributes of that object that
    depend on that content.
    My problem is that I need to change the origal content into
    something else using that extendedPreUpdate method
    and I don't know how.
    The bean-side Document class has an easy method setContent
    (DocumentDefinition) for changing the content of its instances,
    but the server-side S_Document doesn't!
    So how can I do that using the server-side classes?
    Maybe using the update(OperationState,
    S_LibraryObjectDefinition) method?
    Can someone give me some help or an example that shows me the
    way?
    Thanx,
    Gerd Vanhoof

    Hi,
    I made a ClassObject 'Division' that is a subclass of the
    oracle.ifs.beans.Document,
    and I want to change the content of a Division instance while it
    is being created because I can't change the editor (Epic) that
    creates this object.
    (and it has to be at creation time!)
    To do this, I made a server-side class S_Division that
    implements the extendedPreUpdate method.
    I was able to get the content of the object when that method was
    called for the 4th time
    and that way I could change some attributes of that object that
    depend on that content.
    My problem is that I need to change the origal content into
    something else using that extendedPreUpdate method
    and I don't know how.
    The bean-side Document class has an easy method setContent
    (DocumentDefinition) for changing the content of its instances,
    but the server-side S_Document doesn't!
    So how can I do that using the server-side classes?
    Maybe using the update(OperationState,
    S_LibraryObjectDefinition) method?
    Can someone give me some help or an example that shows me the
    way?
    Thanx,
    Gerd Vanhoof

Maybe you are looking for