Change the Data and Log file locations in livecache

Hi
We have installed livecache in unix systems in the /sapdb mount directory where the installer have created sapdata and sapdblog directories. But the unix team has already created two mount direcotries as follows:
/sapdb/LC1/lvcdata and /sapdb/LC1/lvclog mount points.
While installing livecache we had selected this locations for creating the DATA and LOG volumes. Now they are asking to move the DATA and LOG volumes created in sapdata and saplog directories to these mount points. How to move the data and log file and make the database consistent. Is there any procedure to move the files to the mount point directories and change the pointers of livecahce to these locations.
regards
bala

Hi Lars
Thanks for the link. I will try it and let u know.
But this is livecache (even it uses MaxDB ) database which was created by
sapinst and morover is there any thing to be adjusted in SCM and as well as
any modification ot be done in db level.
regards
bala

Similar Messages

  • How to defrag after Shrinking the data and log every night

    OK, my shop has a shrink job that runs every night. It shrinks the data and log files. DBCC SHRINKFILE (filename,1). We have recovery model Simple.
    So reading that SHRINK is horrible for the data file because of fragmentation, so looking to stop the daily job. BUt this job has been running everyday for years right after the ETL. We have a big nightly ETL process that (1) truncates several
    hundred SQL tables and then BULK INSERT from the AS400 (2) for really large tables we just bring in the last X number of days from the AS400 and insert those records into the SQL table. We have very few indexes, but do have some on the really
    large tables. FYI - The SQL Servers are at the clients' sites.
    What kind of fragmentation has the SHRINK on the data file caused? how would it affect the ETL, and retrieval of data during the day? how can the fragmentation be fixed? 

    Hello,
    Databases suffer from fragmentation on indexes as explained
    here, but they suffer from physical fragmentation at the storage level also. 
    When the shrinking process shrinks a data file and recover space from the disk and the data file needs to grow again as part of your ETL process the new portion of the data file will rarely be contiguous to the rest of the data file on disk, and if this
    shrink process happens many times, the data file may be spread among many tracks on the disk. This increases the disk requests required to write data on a fragmented data file and increases disk requests to create new data files. In general, fragmentation
    will originate that what should be a simple I/O request has to be broken on many disk requests, making disk activity and performance less predictable and making disk queues larger.
    My suggestion is to stop sql server services during maintenance window, defragment disk using the Windows Defrag tool or a third party tool, when finish start SQL Server services again, then defrag indexes on your databases.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Do we need to format data and log files with 64k cluster size for sql server 2012?

    Do we need to format data and log files with 64k cluster size for sql server 2012?
    Does this best practice still applies to sql server 2012 & 2014?

    Yes.  The extent size of SQL Server data files, and the max log block size have not changed with the new versions, so the guidance should remain the same.
    Microsoft SQL Server Storage Engine PM

  • Steps to move Data and Log file for clustered SQL Server

    Hi guys 
    we have Active'passive SQL 2008R2 cluster environment.
    looking for steps to move Data and log files from user Database  and System Database for  SQL Server Clustered Instance. 
    Currently Data and log  files resides on same drive for user and system Databases..
    Thanks
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

    Try the below link
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/468de435-3432-45c2-a50b-23519cd2686e/moving-the-system-databases-in-a-sql-cluster?forum=sqldisasterrecovery
    -Prashanth

  • Apple Remote Desktop - how to change the date and time server ip address?

    Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
    So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

    Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
    networksetup -help
    systemsetup -help
    That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
    Cheers.

  • I can't get to update my apps it keeps on saying cannot connect to iTunes ... I changed the date and it didn't work still

    I can't get to update my apps it keeps on saying cannot connect to iTunes ... I changed the date and it didn't work still

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can’t connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Don't have proper privilege to change the date and time. Group Policy does not work

    Hello All,
    I have configure group policy to change date and time only administrator. The problem is Windows XP machine cannot view the calendar but windows 7 can. So i need to view the calender for windows XP machine.
    Error: you do not have proper privilege to change the date and time.  
    Please suggest.
    Thanks

    Hi Parvez,
    Before going further:
    I applied a VM Windows XP pro. When I logged in as a local admin, I can view the calendar from the right corner of desktop or from control
    panel. However, when I logged in as a normal user account, I received the same message as yours.
    For now:
    I know this is not what you want. However, for normal users to view calendar, we can consider to give
    Change System Time permissions to these users.
    In addition, regarding this topic, the following article and thread can be referred to for more information.
    You cannot set the date, time, or time zone on your computer
    http://support.microsoft.com/kb/300022/en-us
    Check windows calendar in XP pro without admin rights
    http://community.spiceworks.com/topic/100116-check-windows-calendar-in-xp-pro-without-admin-rights
    Please Note: Since the second website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best regards,
    Frank Shen

  • How do you change the date and time format in Pages

    I've tried changing the date and time format a number of times for Pages but it does not change.  I'm going to the System Preferences/Language and Text and Formats.  I make the changes click on OK and go back to Pages.  NO change.

    Hi Uncle,
    Page 116 of the Pages'09 User Guide: Control Click the date, Edit Date and Time.
    Date and time can also be in a table. Format the table cell.
    The User Guide is well worth a read. Download it from the Help menu in Pages.
    Regards,
    Ian.

  • Change the date and time of a photo in iPhoto?

    How can I change the date and time of a photo in iPhoto?

    Use either the Adjust time and date command or batch change time and date command
    Adjust is to fix incorrect times like wrong camera settings - batch change is to record a totally new time and date - typically for scanned photos
    Select the photo(s) and use the appropriate command for your needs
    LN

  • Changing the Date and Time of photos

    Hello,
    i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and times are not changing.
    so i was wondering how do i change the time for each photo and event? can i change the time to a start and finish date rather than just one date?
    Any help with the above would be much appreciated.
    Thanks

    I have just looked at this again, i dont see an option to set both a start and end date, any ideas?
    That is not an an option - and it makes no sense
    You can do one of three things:
    1 - add a constant delta to all selected photos thereby correcting an incorrect setting on a camera and preserving the sequence and integrity of the photos dates ad times
    2 - change the date and time for all selected photos to a specific value
    3 - change the date and time for all selected photos to a base value plus an increment for each successive photo.
    There are two choices under the photos menu
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    2 - batch change date and time - this simply changes the date & time to your selected value with an option to add an increment to each
    Both have an option to modify the original photo which I do (I'm not sure why you would not want to modify the original)
    And when i go into photos, the ones that i have altered by +Photos >>> Adjust Date and Time+ still have different times and dates, any ideas?
    AS described in the iPhoto help and above
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    So after adjusting time and date all photos selected will have the time and date changed by the same amount (a constant delta) and if they were all different before they will still all be different - if they were all the same before adjustment they will still all be the same but at a different value
    LN

  • Changing the date and time in a 1240 ap

    How do you change the date and time in a Cisco 1240AG AP

    This doc should help you set the time:
    http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37adm.html#wp1036858

  • Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

    hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • 2005 database and log file locations

    Is there a SQL query to list where exactly the database and log files reside for all databases on an instance (sql server 2005)?

    You can query the Information form DMV
    sys.master_files (Transact-SQL)
    SELECT *
    FROM [sys].[master_files]
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

    Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

    Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
    If you cannot open System Preferences you can reset your system date and time using Terminal.
    Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
    Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
    Open Terminal - it is in your Utilities folder and looks like this
    You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
    At the prompt, you will be typing a command resembling the following:
    sudo date mmddhhnnyyyy
    ... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
    Substitute numerals in the above command according to the following:
    mm = month
    dd = date
    hh = hour (24 hour format)
    nn = minutes past the hour
    yyyy = year
    Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
    sudo date 020821002014
    or
    sudo date 0208210014
    Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
    To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
    Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
    To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

  • In iPhoto 11 changing the Date and Time EXIF becomes Garbage?

    Hi- the new photo date I choose for a photo (say 1946) turns into garbage after saving - like 1165 or 1492- ( and Columbus would be suprised).
    Detail: About 5 years ago in Windows PC in  XP folders  I scanned old family pics into folder for 1946 and all was well= until few months back in 2011 I crossed over to Mac Book Air and  iPhoto 11.
    However iphoto  doesnt care for file name- Its sorts all in event date based on scan date- exif date-  embedded by the scanner when I did it. OK. Smarter.
    So to change its date I select each photo in iphoto11- then  select "change date" and changed the date what I want it to say (like   06/06/1946) - and saved .
    Problem. Now it has two dates against it - one date in year 1492 and the other in 1765- .
    I have tried changing the date differently using  the little Up or Down arrows, and its scrolls (eventually!) to 1946 -I  do a save..... and another crazy date turns up-
    Am guessing so its got to be a trick related to the " day counter"- mind you I dont see the pint of telling me that my photo is having its date changed by some quantity of thousands of days- Doh that sounds very Windows like.
    I must be doing it wrong.
    Any experts please?
    Thanks in advance !

    Thanks AppleMan1958, you're right.
    My view was set to Favorites and Unmarked so when I imported the video, rejected parts of it, and THEN changed the date I was unable to see that I wasn't changing the date on the rejected portion. I changed the view to All Clips (in the View menu) and then I could plainly see that the rejected clips still had the current date.

Maybe you are looking for