Change the Deadline -latest end from step before or other WF

Hi,
I have the following situation.
We create a wait event step with a lasted end calculated previously.
The problem is that the values for calculate changes after the wait step is created, so we need to change the lasted end too.
How this lastest end be modified from other step or Workflow?
Thanks in advance.

Hi Francisco,
What is the exact problem
You have a Wait step with the Latest end - set with reference to the "Work Item" and the Time set as "x" hours or days.
Now when the workflow reaches the Wait step, u want to change the "x" hours into "y" hours .
Is this requirement.?
May b u can try the following
U can calculate the Latest Time for the Wait step , in a background activity , before the Wait step and then use the calculated value as "Expression" (i.e. calculate "x" from the expression) for Time in Latest end.
Hope this helps.
Raj

Similar Messages

  • Changing the Database Character Set  From WE8MSWIN1252 to AR8MSWIN1256

    good morning everybody,
    I need your help to know all step which it is necessary to follow to change the Database Character Set From WE8MSWIN1252 to AR8MSWIN1256
    thank you

    If you have not already done so, read up on Character Set Migration and using the CSSCAN tool to verify the database before making any changes.

  • Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
    Thank you
    Don

  • Change the backend doc type from PR to PO in BADI BBP_TARGET_OBJECTS.

    Hi,
    We have followed below approach for backend document type determination.
    1. A custom function module contains the logic to determine the backend document type of a Shopping cart line item. THis function module, performs many checks and hence cannot be called in any BADI that is executed in Foreground.
    2. I am using BADI BBP_TARGET_OBJECTS to change the follow document type by calling the custom function module.
    Issue here is, if the backend document type of a line item is Purchase requisition (2) by SAP standard, and if I try to change it to Purchase order, it gives run time error and ends up in creation of Purchase order.
    After further investigation I found that this line item (with default backend doc type as 2) has a desired vendor. If we change the desired vendor of this line item to fixed(To Partner function 19 from partner function 39), it allows us to change the doc type from Purchase requisition to purcahse order in BADI BBP_TARGET_OBJECTS.
    But changing the partner function is possible only in BBP_DOC_CHANGE BADI, and I cannot call the custom function module there, as it may impact the performance.
    Is there any other way, I can change the partner function in any of the BADIs called in background?
    Or Is there any way by which I can change the backend document type from PR to PO in BBP_TARGET_OBJECTS?

    Hi Parab
    if you swaping 39 to 19 viadoc change badi
    REQUESTER has a control on Purchase ORDER Vendor and BUYER lost a control so your business has to decide.In this case procurement department lost their control.
    Fixed vendors are like inforecord and contract negotiated for best price ..
    Muthu

  • In PC I have changed the default app location from default to other and copied the previous content to new location and changed the Default location in preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

    In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes)  and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

    wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick

  • CWB-Need to change the eligible salary column from yearly to monthly

    Hi All,
    I need to change the eligible salary column from yearly to monthly at Employee Allocation from Compensation Workbench.
    Kindly help me guys
    Regards,
    Sajid

    You can change the activity reference period in the Plan Form - > Not In Program tab from annually to monthly. However, it will impact all the calcuations as it will use monthly values for everything. Please be careful of this. I would suggest testing this (along with posting back the increases to ensure they are annual amounts) before proceeding with this.

  • Change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
    Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
    I followed the instructions of Geekdad3 a little bit lower on the page.
    Good luck for anyone else who has this problem

  • How to Change the Default SSH Port from Terminal ?

    How to Change the Default SSH Port from Terminal ?

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • In Adobe Acrobat XI pro how do I change the units of measure from inches to centimetres?

    In Adobe Acrobat XI pro how do I change the unit of measurement from inches to centimetres?

    Edit > Preferences > Units

  • How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

    How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

    Anubha,
    It worked! Thank you so much.
    I'd opened file with the 'Open with' feature then clicking Adobe Reader,
    but that didn't do it. When I used 'Open with', then 'Choose default
    program...', it worked like a charm.
    Again, thank you!
    Jonathan
    On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

  • How to change the status of IDOCS from 29 status to 53

    Guys
    how to change the status of IDOCS from 29 status to 53
    Thanks in advance

    Hi Krishna
    IDOC_STATUS_CONVERT Use this FM and reward me

  • How to change the InfoView logo [Favicon] from the browsers address bar.

    Hi All,
    I am launching an Infoview in a new web browser from the netWeaver portal through a link.
    The favicon for potal is changed on the portal server.
    How I can change the InfoView logo[Favicon] from the browsers address bar?
    If anybody knows where that image is located on the BOE server where I can replace the icon with my company icon?
    Please advise!
    Awaiting Reply!
    Smita Thorat

    Hi,
    the icon has the name favicon.ico and can be found in the root folder of the Web AS /Portal.
    Favicons are images of the size 16x16 or 32x32 pixel in the Icon format (image/x-icon) and files have an .ico extension.
    You can either change the standard sap favicon directly on the WebAs server wich needs might be done after each support package.
    Regards,
    Kai

  • How do you change the Print Products Store from USA to UK like you can do in IPhoto?

    How do you change the Print Products Store from USA to UK like you can do in IPhoto?

    Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
    Aperture adds a layer of complexity that is not needed by many.  iPhoto is a very powerful application and fits the needs of many amateur photographers.
    As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
    As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
    Hope this helps, post back if you have anymore questions.
    regards

Maybe you are looking for

  • How do I sync my iPhone 4S calendar to my MacBook with the new OS?

    I just upgraded and lost my calendar settings? I am not on iCloud. Thanks for any help.

  • Issue with SIEBEL - XI Integration with SOAP

    Hi, I have an issue with the integration of SIEBEL and XI via SOAP. In the scenario Siebel calls a synch Web Service on XI. The provided WSDL was implemented on Siebel and when Siebel calls the Web Service the message is received correctly by the XI

  • AR-Dunning levels

    Hi, We have a scenario like this: A customer has two dunning levels.  He has been dunned for 1st level with 3 open items.  Later on, 5 more items have been posted. When trying to dun the customer, the system gives 2nd dunning level to fist 3 items an

  • Wireless Messaging API

    Hi you all, I am trying to send messages over GSM using the WMA API, but I am rather new to J2ME and I am struggling to understand a few things. I have been searching and I found this code: import javax.microedition.midlet.*; import javax.microeditio

  • Creative cloud apps tab won't load the list of programs.

    even after reloading  the tab with the reaload applications button, the same message pops up "Download error, press retry to try again