Change the default of Free/Busy for an event in Outlook 2010

Is it possible (as it was in old version) to set the Show As default for events?
Thanks

Hi,
The ‘Free/Busy’ information is used by the people who send Meeting requests, to determine whether a person is free or busy so that, they can know their availability status for Meetings. Below is a tutorial that will show you how to change the
Permissions for viewing a particular person’s Free/Busy information.
To change the Permissions for your Free/Busy Information, do the following
1) Click on the ‘File’ tab and then on the ‘Options’ tab.
2) In ‘Outlook Options’ window, click on the ‘Calendar’ tab.
3) Now inside the Calendar tab, under the ‘Calendar Options’ category, click on the ‘Free/Busy Options’ tab.
4) Now in the ‘Free/Busy Options’ window thus opened, you can choose to publish a certain number of Month’s calendars that contains your Free/Busy information and also change the time interval for updating your Free/Busy information.
5) You can also have your ‘Free/Busy’ information published on a particular Web location. To achieve this, select the checkbox that says ‘Publish at My location’ and in the space provided below, enter the specific location and click
on ‘OK’.
So, this is how you can change Permissions for viewing the Free/Busy information.
Sincerely

Similar Messages

  • T-Code for changing the default Exchange Rate reference for creating PO?

    Dear All,
           Can somebody kindly give me the T-Code for changing the default
    Exchange Rate reference for creating PO? Is there a Step by Step
    procedure before changing the default exchange rate?
    Thank you in advance.
    Regards,
    Gopesh

    Hi
    There is not such Tcode to change the default exchange rate from the PO.
    If you want you can confugure the exchange rate in the following path in the IMG,
    SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
    Hope it helps you.
    Cheers
    Umakanth

  • Is there a way to change the default Save As location for Adobe Reader XI?

    Is there a way to change the default Save As location for Adobe Reader XI?

    kel-drago wrote:
    Can't be that difficult to arrange.
    No, it's not.  But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How do you change the default Save As location for PDF files?

    I have not been able to find a straight answer anywhere.  I am scanning documents to my email then I need to save them.  Instead of saving them to the last folder I saved a file in, (which would be logical) it saves them in a temporary files folder EVERY time.  I have seen answers about how to change the folder when saving documents from a web browser but that is not what I am doing.  Someone please help!  I have thousands of files to save and this is incredibly frustrating. Agh!!!

    Is it your scanning software that does that, or Adobe Reader?
    Anyway, I don't know how to change the default change destination for either of it.
    I have had a similar problem with an entirely different software, so what I did is create a shortcut to the destination folder in my Temp folder, so a simple double-click when saving gets met quickly to that target folder.

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • How do I change the default "Save As" location for pdf docs?

    I save a lot of scanned in pdf documents.  However, when I open up a new .pdf file and wish to "save as" to a specific location in "my documents" the default location always directs the newly saved documents into th "temporary files" location.  I would like to change the default location to "My Documents" instead so I do not have to redirect every newly scanned document to "My Documents" form the temporary file area of my computer.  Please inform.

    I got the same problem, I cannot even see where the files are saved after I press "Save" button and cannot change the name of the file that I am saving.

  • How can I change the default start-up date for a new functional location?

    Is there a way to change the default date when creating a functional location? Whenever we create a new functional location, there is a date populated in the start-up date field. This date is our go-live date from last year and I cannot find the location in the IMG (if there is one) to stop the date from automatically populating with the date from the superior functional location. I tried setting the field from input to required but the date still populates automatically. Does anyone have any suggestions on how to leave the start-up date field blank when creating a new functional location?

    That field is generally picked up from the immediate superior FL in the hierarchy through the inheritance functionality.You will have to overwrite this date.I dont think you can clear this field through Configuration functionality.
    If you are in Ecc 6.0, you could get the help of developer to use implicit enhancement to initialize the field contents.
    Regards
    Narasimhan

  • Changing the default location PowerPoint uses for templates

    I do not want to use the default location MS Office initially configures for templates that is buried in some obscure folder on a local machine in that only Office know about.  Instead want to keep my templates in the same location on a company server
    with the rest of my materials so I can access it from my company laptop or from the Virtual machines I am forced to use in other company locations. This way I will have my templates everywhere I work.  When I make changes they are available to me everywhere
    I work and are not buried in a folder on a laptop or a virtual machine in a conference room half a world away. 
    MS Word allows users to configure this default location for templates but no where in PowerPoint can I find any way to configure this location. Previously on my laptop I have been able to configure the default PowerPoint template location, I believe, by
    setting the location in MS Word; however, this is not happening for me now on the virtual machines I am using when away.  I have scoured the Options settings and if it is there it is well hidden.
    To make matters worse I am trying to use what PPT is providing to me while I sort this out and when you try to open "My Templates": there is a message that says:
    "To add a template to My templates, click the File tab, click Save As, click Trusted Templates, and then save the file as a template."
    Of course when I follow these instructions there is no folder named Trusted Templates on the left side of the dialog box.  I am not sure why it is so difficult to allow us to configure this ourselves for each program but apparently it is.

    Hi,
    Please refer to this kb below:
    http://support.microsoft.com/kb/924460/en-us
    As mentioned, if you use Word 2007 or Word 2010 to change the location in which your new templates are saved, you also change the location in which all 2007 Office program templates or all 2010 Office program templates are saved.
    Office programs use one registry key to record the user templates file location, you can browse to the following path to check if it's recorded:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\General
    The user templates location is stored in the
    UserTemplates
    string value.
    If it doesn't exist, try to manually add it, check if this helps. Detailed information can also be found in the kb introduced above.
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
    carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry:http://support.microsoft.com/kb/322756/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • JDeveloper settings - change the default code editor view for JSPx  files

    Hi, when you open a .JSPX or JSP page the editor opens in 'design' mode. Is there a way to change this default behavior and open in 'source' mode? I write the JSF/JSP pages editing code and every time I open a new page I have to wait till the IDE opens in view mode and then manually switch to source mode by hand.
    Thanks
    Jordi

    A year and a half after this post, and I still have this same issue as well. Even 10.1.3.3 has it.
    Thanks for posting the solution as this will now save me lots of time waiting and often re-starting JDeveloper.

  • How do I change the default fonts on Firefox for Android version 21?

    Is it possible to restore the default fonts from earlier versions of Firefox to use on web pages for version 21 instead of using the new shipped Open Sans and Charis fonts?

    Smo,
    That is incorrect, you can change the fonts used in content to your own choosing albeit only through advanced about:config preferences. This is not recommended.
    Change these in about:config;
    *font.name.serif.x-user-def
    *font.name.sans-serif.x-user-def
    *font.name.sans-serif.x-user-def
    *font.name.monospace.x-user-def
    *font.name-list.sans-serif.x-user-def
    *font.name-list.sans-serif.x-user-def
    *font.name.serif.x-western
    *font.name.sans-serif.x-western
    *font.name.sans-serif.x-western
    *font.name.monospace.x-western
    *font.name-list.sans-serif.x-western
    *font.name-list.sans-serif.x-western
    I've never tried changing these so you are at your own risk here.

  • How to change the default login user id for firefox home?

    I need to enter a login id to open a firefox page. Unfortunately, I made an error on the login id. How to change this default login ID to open a Firefox home page?

    sheldonidx wrote:
    Can this be modified to change the underscore to a period?No.
    I'm not sure if this is possible because it looks like the XML refers to compiled Java classes. Correct. A similar request has been discussed before:
    http://forums.sun.com/thread.jspa?messageID=10626873#10626873
    Regards,
    Shane.

  • Change the default service order type for repair order - RA

    When creating a repair order (RA), a service order of type SM03 is triggered. The default order type is SM03. How can I change the order type?
    Thanks in advance...

    hi,
    try to change in OIOL and check ..
    regards
    pushpa

  • Powershell Script to change the default user Account picture for all users in windows 7 and 8

    Hello,
    Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
    I will deploy this through MDT TS as Custom TS after OSD.
    Shailendra
    Shailendra Dev

    Hello,
    Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
    I will deploy this through MDT TS as Custom TS after OSD.
    Shailendra
    Shailendra Dev
    The default user account picture is stored here.
    C:\programdata\Microsoft\User Account Pictures\user.bmp
    It should just be a matter have copying the picture you want to that location and over writing what is there.
    or....
    Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
    You can also configure this by a registry setting;
     [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
      UseDefaultTile = 1
    The picture that you configure, will not be loaded until the user account will actually be created on the pc. Meaning the first time a >new< user will log on to a pc, they will have no picture shown at all using their login screen (this is default
    behavior). Same will occur if you enable the policy don't display last user name. However, once they log in the picture will be shown in the start menu, and if they lock their pc the image will also be shown

  • How do I change the default email app Firefox for Android uses?

    I'm using 8SMS as my default messaging app. When I try to share a link, Firefox gives me an error saying that messaging isn't my default app so it can't compose the SMS. Is there a place to change which app Firefox looks for when composing SMS messages?

    Hello,
    Did you choose share via 8sms? And what does the error message say exactly?
    Thanks

  • How do I change the default "open with" application for certain files??  I've tried EVERYTHING!!

    Hi guys!
    PLEASE PLEASE PLEASE someone help me!!!  I have been trying for ages to change this!!  It is SO frustrating!!  I recently bought a new MacBook Pro 13" after my old one (2009) got stolen.  Went from Snow Leopard to 10.8.2, restored all my apps and files etc (thanks goodness I backed up).
    NOW I have a problem!  All my .xls and .doc files open up with Pages and Numbers, and not OpenOffice.  NO MATTER WHAT I DO!!!
    The basic "change open with" "always use this application" story doesn't work.  It always reverts back to Pages or Numbers.  I also tried a Terminal Command I found on this forum from way back in 2010.  But that doesn't work either.  I also tried a .pst deletion but I don't have a .com.apple.launches.pst file!
    PLEASE GUYS.  PLEASE!  SOMEONE HELP ME HERE!!!!!!!!!!  It's driving me nuts!!!!!  LIKE NUTS!!!!!!!

    Here is what I would do:
    Update OpenOffice to the latest Mac OS X version for improved compatibiity with Mountain Lion.
    Boot into Safe Mode to clear caches, verify/repair permissions, and rebuild font database, etc.
    Reboot, holding down the shift key until you see a progress bar on the grey boot screen.
    At the login prompt, and before you click the right arrow button to login, press and hold shift again.
    Reboot normally.
    Now follow sig's advice, and specify OpenOffice as the can opener for Word and Excel files.
    If OpenOffice installs into a /Applications folder as individual writer, and sheet applications, then use these names respectively for Word and Excel files.
    LibreOffice (what I use) only offers the LibreOffice application choice.

Maybe you are looking for