Change the default video properties in inspector

Hi !
I would like to be able to change the default setting in the inspector for video clip when first added to a timeline.
i.e. the Spatial Conform is by deffault set to FIT and I would like to be NONE as I work with 2K files on a 1080p timeline.
also I wonder if CROP setting is disable perhaps rendering is a little bit faster ? (on clip with several effects and animations) ??
so I'll prefer to disable it when I don't have the use for it (as default setting for all futures video clip)
Thanks in advance.

humm I think you "mis"understand a bit what I ask.
I would like to be able to change this default setting in FCPX forever...
so every time I add a new clip in my timeline, it will be with these setting...
so... I think it is not possible.as Tom Wolsky said, I have to ask a feature request to the Apple FCP X developpers...
Thanks

Similar Messages

Is there a way to permanently change the default video player to VLC?

I installed the QuickTime update and now all my AVIs won't play with sound. Downloaded VLC and they will play with sound. I went to 'Get Info' on an avi and changed 'open with' to VLC and selected 'change all'. They will open and play with VLC until I re-boot, then everything changes back to QuickTime. Right now I just hate Quicktime and don't want to use it. How can I change the default video player to VLC without Quicktime changing it back when I reboot?

How can I change the default video player to VLC without Quicktime changing it back when I reboot?
Sounds like you changed it properly. The question now becomes, "Why isn't the change being saved?" Have you tried repairing your disk permissions? As to the original problem, it could be that the QT upgrade has rearranged the order of your stored codec components table called by QT. While this table is rebuilt each time the QT Player is opened, the table seems to be ordered from latest component installments to oldest. So there is the possibility that two (or more) components are allocated for playback of you AVI files and the wrong one now has priority. If you can find it (e.g., possibly Perian), you could simply remove it from the QT components folder and then replace it to again change the "build" order for the table. (Basically, you would need to run a component conflict test strategy here.)

How can I change the default URL in hyperlink inspector

How can I change the default URL for link to external page in the Hyperlink Inspector?

You can't change the default url in the inspector.. but an easier way to do it rather than editing the box everytime you need to build a link is to copy the url you want to link to and then highlight the text or image that users will click on and then click enable hyperlink.. when you do that whatever the last url you copied using "command" "C" will automatically be entered into that box and replace "livepage.apple.com"
It saves alot of time if you are doing alot of links.
Hope This Helps!

How can I change the default video conversion applied when I copy an AVI file from my PC to my Android HTC One M8 phone?

Here's the situation...
I have an Android HTC One M8 phone which I connect via USB cable to my PC, then I use Windows Explorer to drag and drop an AVI file from my PC onto a target folder on the phone. When I would do this after I had first purchased my phone a message box
would come up with the heading "Convert and Copy" and ask me "Do you want to convert <filename> before it's copied to your device?" and give me the options "Yes, convert and copy (recommended)" or "No, just
copy Your file will be copied, but might not play on your device."
If I chose to convert it converted the file to MP4. No problem, that's what I wanted.
The problem I now have is that after doing some work with other video applications a while ago where I was outputting WMV files I now find that the default conversion for the above described copy from PC to Android phone now converts files to WMV.
I simply want it to go back to converting video files copied to my phone as MP4, but I can't seem to find where I can set this!
It appears that the copy/conversion process in Explorer is being handled in the "Portable Devices Shell Extension" dll - WPDSHEXT.DLL
Can anyone tell me what I need to do to set the default video conversion back to MP4 ???
Thanks

Thanks Rob.
I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol.

How do I change the default paper size in Firefox if Printer Properties does nothing?

I print on different including a receipt printer with roll paper.
I had to reset Firefox yesterday because of a bug, and then changed the Printer Properties to be able to print again in the right format on the receipt paper. But now everything I print from Firefox (even when I change the paper size to Letter on the Printer properties for the regular printer) is in the receipt paper format (long and narrow.) When I do Print Preview, I can see that the paper looks like the roll paper, even if I'm trying to print on letter size.
I tried resetting both printers with about:config, I tried changing in the printer properties for both printers and nothing works.
Is there a way to change the default paper size in Firefox?

Hello,
My understanding is that Firefox uses the global printer settings. I am not familiar with the Windows 8 interface, but can you change the printer settings in its Devices and Printers and see if it changes the default for Firefox as well?

How do I change the default properties for Replace(Ins)?

Acrobat Pro X
Comment tools: Annotations
All tool icons EXCEPT Replace(Ins) show "Tool Default Properties" as an option when right-clicked. When I right-click a particular replacement in the document and select "Properties," there is no option to set current as default.
So, how do I change the default properties for this annotation tool? I need to change the Author and the color.
Thanks,
Nancy

Create customized controls for your graphs and controls and setup your favorite attributes .
Use your custom controls instead of the canned controls.
Do a search on UI and you will find a community that already created custom controls.
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

How can i change the default application to vlc player for playing any videos on my macbook?

How can i change the default application to vlc player for playing any videos on my macbook?

1. Control click the file you want to open.
2. Click Get Info.
3. Under open with, pick the App you want to be default.
4. Click Change All Button.
5. Confirm your decision.
You have to do this with every file that has a different extension. You can't change the default for every file with a different extension in a single operation.

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default hint box color?

How to change the default hint box color on the default Metal LookAF?
I'm trying looking for something with javax.swing.UIManager, but i just find ways to translate the UI.
Any idea?

[UIManager Defaults|http://www.camick.com/java/blog.html?name=uimanager-defaults] shows all the properties of the UIManager.
Although there is no "hint box" component, so I don't know if it will help.

Changing the default download settings in the excel.

Hi All,
Is there any methodology to change the default settings of the download of a report to a excel file. Because when I try to download reports having pivoted chart view it tends to hide the titles. I have added the padding but no luck. It is taking the default settings.
Is there any xml file where we change those properties?
Thanks:

George,
Thanks a lot, that is very helpful.
To solve my problem I am going to use that method (Create a new file @ startup, see if it exists, and if it does not exist then it is the first time running) and tweak it a little to solve my exact problem.
I need to be sure that the application is being run after installation (from the installer), because the user MAY select "do not run after install", in which case the first time they try to run the program by opening an associated file, the program will exit, which is not a good first impression to leave on the user.
So I will check if the file exists created and if then i will check if arguments (file name) is being passed.
1. If a file name argument is passed I'll create the file and continue running to program. - First time run, but not from installer.
2. If no argument is present and it is the first time, I will shut down immediately with no message. - First time running/run from installer.
3. If no argument is present and file exists, exit with error (file needed). - Not the first time run, but no argument passed.
4. If argument exists and and file exists, run program. - Normal execution.

How do I change the default media kind on iTunes 11?

When I add movies to my iTunes, they are automatically labeled under the media kind "Home Videos". Is there a way to change the default media kind to "Movies"? It's very tedious to have to go to Options, then choose Movies under Media Kind for every new movie I add. And I have no intention of waiting until I've added many movies to change them as a batch. My videos are always Movies, so the Home Video option is useless to me. Any ideas?

You're stuck with things the way they are unless Apple decide to change it. There are no options to make it behave as you wish, and Media Kind isn't available as a property that can be modified by a script or I could offer you a one tap fix-it icon.
tt2

CS4 Photo downloader - can I change the default path?

I'm using Bridge on Windows 7 x64. I have 2 hard drives exclusively for photographs. I never, ever store them in 'C:\Users\Mary\Pictures'. But when I download images with the Photo Downloader, C:\Users\Mary\Pictures' is the folder I'm offered. There's no box in which to paste a folder string - and it takes 9 clicks (including a couple in the scroll bar of the dialog box) to navigate to 'S:\Pictures, Initial\2 - Initial Negative Scans\2010 Initial Scans\[current subfolder]'. Is there any way of making the downloader believe that I always want to download to S:\Pictures, Initial\2 - Initial Negative Scans\2010 Initial Scans\....? I'm used to editing the Registry, but I can't find anything to edit in HKEY_CURRENT_USER\SOFTWARE\Adobe\Bridge CS4\Preferences. Thanks Mary

Curt You're right, it is something in Win 7.
I remembered that I have CS4 on my laptop, which is still running WinXP, and tried the Photo Downloader there. It had remembered the last folder I pointed it to, way back in September.
I then found a note telling myself what I had done to stop Bridge from using the c:\docs & settings\.....my pictures folder in XP. I'd used a utility that changes your default pictures, videos, etc., folders to whatever you want them to be.
I never keep anything in them, so I used the utility in Win 7 to change the default Pictures folder to 'S:\Z\ Pictures'. When I opened Bridge Photo Downloader, the 'location' folder was now 'S:\Z\ Pictures'. I navigated from there to 'S:\Pictures, Initial\2 - Initial Negative Scans\2010 Initial Scans', created a subfolder, uploaded some raw files from the card reader, closed Bridge, and rebooted.
When I re-opened Bridge and the Photo Downloader, it still pointed to my last used folder. Triumph!
Thanks for your help. I wouldn't have got there without it.
I'll look on the Windows 7 forum to find out whether there's a less drastic way of doing this. After all, some people may want to keep their C:\Users\[user]\Pictures folder for non-Photoshop pix. There should be a way of doing it.
Mary

How do I change the default locations for the iTunes music and iPhone back-up folders?

My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!

You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

Changing the Default name of DVD Disk in OneStep

Is it possible to change the default name of the disk that is burned on iDVD 6 "OneStep DVD" ???
the default disk name becomes "IDVDONESTEPDVD"...
I make lots of DVD with OneStep and would like the name created to be different.
Is this possible and if so...How??
Thanks for your advice...
STDigital

Not sure if this is possible or not but did you already check the iDVD6 Help Menu and try the following?
Choose Project > Project Info. Type the new name in the Disc Name box.
If this approach isn't possible, then it's likely not a very good idea to change its default title. Good luck.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Change the default video properties in inspector

Similar Messages

Maybe you are looking for