Change the delta pointer at source system side

Hi BI friends,
I'm facing some problem while extracting the data from XI system. Whenever i try to fetch the data from XI then it throws an ABAP dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY.
As per my konwledge, we have made setting in source system to maintain delta only for 14 days and now we are in 13th day.
we have only one day remaining to correc the memory issue at source system otherwise we will miss out all transaction data (delta).
My question is,
1. is there any way that we can change the delta pointer to change no. of days from 15 to 30 in source system side?
2. is there any way to resolve the above memory /ABAP dump other than following checkings (we have checked the below mentioned terms).
- - - - RFC, IDOC, Reduce packet size, RFC
Your help is highly appreciated.
Regards,
Varun

we already proposed this solution to XI team but is there any way to resolve this issue from BW System side...
even we have performed some t-codes but dint help us to resolve the issue.
throw some input.

Similar Messages

ECC6.0 upgrade and BW steps for mapping the new ECC6.0 source system

Hello gurus
We are upgrading from R3 4.6C to ECC6.0. We use BW 7.0 SP 18. We will create the new ECC6.0 source system in BW, replicate metadata and everything. The question is how do we copy or reassign the existing objects pointing to our current 4.6c dev system (transfer rules, transformations, infopackages, process chains) to point to the new ECC6.0 dev system ? As a note, we also need to keep the current 4.6c source system objects until go-live o ECC6.0.
What is the common practice in such a case ? I am sure we are not unique...
A prompt response would be appreciated.
Thank you all.

So the plan is to copy dev R3 and upgrade that - then Q r3 copied and upgrade that - then upgrade directly prod R3?
If so - then if it were me - I would firstly prove all this in a sandbox environment where BW dev points at an upgraded sandbox R3 ecc
ie same logical system
Then once that is proved I would organise downtime of BW development for a few months whilst the d-q-p ecc happens
Then when they copy dev r43 to ecc r3 i would then just point BW dev at the new ecc box and go from there (ie clear the deltas - change the logical system name to the new ecc box - replicate meta data - transtru all the datasources - run the process chains nothign to worry about)
However if you cant afford the down time - you may have to have an alternative transport route - ie copy dev BW to a another dev bw box and have an alternative path to production for issues
Then once everything is upgraded redo the changes through d-q-p to get the transports back in line (thats what we did)

Can I create a keyboard shortcut to change the reference point? (Mac CS6)

I'm forever changing the reference point during a job and the tiny squares are a nightmare (my eyes aren't what they used to be), a shortcut to change it from the centre to top left would be great.
Cheers
Mark.

@Mark – and here an overview of all available options:
AnchorPoint.BOTTOM_CENTER_ANCHOR
The center point on the bottom of the bounding box.
AnchorPoint.BOTTOM_LEFT_ANCHOR
The bottom left corner.
AnchorPoint.BOTTOM_RIGHT_ANCHOR
The bottom right corner.
AnchorPoint.CENTER_ANCHOR
The center point in the bounding box.
AnchorPoint.LEFT_CENTER_ANCHOR
The center point on the left side of the bounding box.
AnchorPoint.RIGHT_CENTER_ANCHOR
The center point on the right side of the bounding box.
AnchorPoint.TOP_CENTER_ANCHOR
The center point on the top of the bounding box.
AnchorPoint.TOP_LEFT_ANCHOR
The top left corner.
AnchorPoint.TOP_RIGHT_ANCHOR
The top right corner.
Uwe

How can i change the mouse pointer image?

Hi friends!!
It's possible to change the mouse pointer image in Swing?
Thanks a lot.

There's a setCursor() method on the frame component.

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an active link by any other one icon I select.

Current Firefox versions have a feature called tear-off tabs.<br />
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

Change the time zone in Java System only

Hi there,
Does anyone knows where to change the time zone in Java system only? I know in ABAP they have t-code: STZAC? where do I change in Java? Configtool or visual admin? what is the service name or parameter for this?
Thanks
Kumar

hi Kumar,
You can change the timezone of the JVMs using the -Duser.timezone
parameter, add -Duser.timezone=<timezone> to all dispatcher and
server processes in your systems, using the configtool
1) open config tool
2) select yes
3) select "cluster-data->instanceXXX->serverXXX/Dispatcher"
4) in "Java parameters" add new line "-Duser.timezone=<timezone>"
5) click "Apply changes"
6) restart your instance
Let me know how is the result
Regards

Change the end point URL in WSDL for web-service

Hi All,
Morning , could someone please help us with this question, we are stuck with this currently.
In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
Now we need to migrate this web service to testing & production environments.
1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
2. Also could this change/update be done prior to deployment as well as post deployment as well.
Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
Thanks as always for help & guidance..

Hi
As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
You can use many approaches along the above lines.
If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
Thanks
Ravi Jegga

Can I change the center point for a motion scale

I would like to motion scale an image with the center for the scaling at the bottom of the image, not the center of the image. I tried changing the anchor point numbers, but that moves the photo as well.

Try setting the Anchor Point - NOT the Center Point. The Ccenter Point is where the center of the image will be; the Anchor Point is the point at which the image is anchored.
-DH
Message was edited by: David Harbsmeier

Change the end point in a web service client???

Hello,
With the Web Service Proxy Wizard of JDeveloper 10g R3, I created a web service proxy that connects to a (web service) end point like this: http://carina.bicevida.cl/OidServices/OidBasicWebServiceSoapHttpPort
My three related questions are:
1.- How can I change the end point registered in the (client) web service proxy ?
2.- How can I do this without need to rebuild the client application?
3.- How can I do this once my client application have been deployed in the application server?
Please help.

Hi,
these are your options
- Edit the endpoint meta data stored in the .proxy xml file (e.g. \src\project\myservice.proxy)
- Use WS proxy wrapper and call setEndpoint on the proxy
- Recreate the proxy in JDeveloper based on the new endpoint. This may require merging any business logic if it was inserted directly in the proxy (as opposed to a wrappering class)
where I think option 1 and 2 is what you would look for. I don't know how exactly JDeveloper 11 is different, but I got the info from development that there will be simplifications.
Frank

How to change the registration point on a shape

Hi,
Is there a way to change the registration point on a shape
created in Director? For instance, I created a filled oval, and by
default Director sets the top left corner of the surrounding square
as the registration point. Nevertheless, I need to place that
registration point at the center of the oval.
Best regards.

Hi, if you create a shape vector from director, the reg point
is in the center of it; if you import a vector created in other
aplication (flash), the regpoint is in the top left corner. To
change the regpoint of an imported shape, try this:
put your shape in the stage in x,y = 0,0 position, then, if
your shape rect is 12,8 pixs, and if you want to move the regpoint
to the center of it
on preparemovie me
member("yourshape").regpoint = point(6,4)
end
play and stop the movie, your shape will change the regpoint
to 6,4
remove the script, and that's all.
Best regards.
sayeg

Changing the Registration point via AS3 . how?

hello,
is it posseple to change the Registration point via AS3 ?
Best Regards,
Crimson

The Attach Code window isn't working for me on this so I
pasted the code into the message. Hope the formatting remains
reasonable.
public class HomePage extends MovieClip {
public var frenchieReal:Swimmer; //Swimmer extends
MovieClip; contains image of French Angel
public var frenchie:Sprite; //To offset regisration point of
frenchieReal
public function loadStage() {
var timer:Timer;
var wayPoints:Array;
//Establish timer for swimmers
timer = new Timer(100, 0);
//Create new swimmer supplying: image path, width, heigth,
and initial x and y location
frenchieReal = new Swimmer("Photoshop/oceanswimmer.png", 57,
41, -24, -28);
frenchie = new Sprite();
frenchie.x = 244;
frenchie.y = 532;
this.addChild(frenchie);
frenchie.addChild(frenchieReal);
frenchieReal.setTimerListener(timer);
//Set waypoints for swimmers
wayPoints = [[230, 530],
[240, 520],
[250, 500],
[260, 480],
[298, 480],
[358, 540],
[368, 544],
[388, 520],
[398, 495],
[404, 475],
[420, 500],
[458, 545],
[528, 550]];
frenchieReal.setPath(wayPoints);
package {
import flash.display.MovieClip;
import flash.events.*;
import flash.utils.Timer;
import flash.net.*;
import flash.display.*;
public class Swimmer extends MovieClip {
private var path:Array;
private var pathLength:uint;
private var pathLocation:int;
private var loader:Loader;
private var intercept:int;
public function Swimmer(imagePath:String, w:uint, h:uint,
xx:uint, yy:uint) {
var urlRequest:URLRequest;
this.x = xx; //Transaltion offsets for image MovieClip (eg,
-24 and -28)
this.y = yy; //Image is visible if these two values are
nonnegative
this.loader = new Loader();
this.addChild(this.loader);
urlRequest = new URLRequest(imagePath);
if (urlRequest != null) this.loader.load(urlRequest);
//Sets an array of waypoints
public function setPath(p:Array) {
this.path = p;
this.pathLength = p.length;
this.pathLocation = 1;
this.parent.x = this.path[0][0];
this.parent.y = this.path[0][1];
this.intercept = -this.parent.y;
public function setTimerListener(t:Timer):void {
t.addEventListener(TimerEvent.TIMER, timerListener);
//this.parent in timerListener is the Sprite object to which
image MovieClip is parented
function timerListener(e:TimerEvent):void {
var i:int;
var iMinus1:int;
var xx:int;
var y1:int;
var y2:int;
var rise:int;
var run:int;
var rotationAngle:int;
if (this.path != null) {
//Move to next segment?
if (this.parent.x >= this.path[this.pathLocation][0]) {
this.pathLocation++;
//Go back to first segment?
if (this.pathLocation == this.pathLength) {
this.pathLocation = 1;
this.parent.x = this.path[0][0];
this.parent.y = this.path[0][1];
this.intercept = -this.parent.y; //Minus y to translate
everything to lower quadrant
//y = ax + b
//y = ((path
[1] - path[i-1][1]) / (path[0] - path[i-1][0])) * this.x +
path[i-1][1]
i = this.pathLocation;
iMinus1 = i - 1;
this.parent.x += 2;
xx = this.parent.x - this.path[iMinus1][0];
y1 = -this.path[iMinus1][1];
y2 = -this.path
[1];
rise = y2 - y1;
run = this.path[0] - this.path[iMinus1][0];
this.parent.y = ((y2 - y1) / (this.path
[0] - this.path[iMinus1][0])) * xx + intercept;
this.parent.y = -this.parent.y;
rotationAngle = -(180/Math.PI) * Math.atan2(rise, run);
this.parent.rotation = rotationAngle;
trace("rise = " + rise + " run = " + run + " rotationAngle =
" + rotationAngle + " Intercept = " + this.intercept);
trace("x = " + this.parent.x + " y = " + this.parent.y + "
rotation = " + this.parent.rotation);

In STO Process How can i Change the shipping point manually

Hi,
I need clarification in STO process, shipping point determined automatically based on ovl2 setting like Shipping condition from customer master loading group from material master plant in the line item.(here the shipping point is1000.)
In my scenario it picking correctly shipping point(1000) even i have maintained manually shipping point(1200) in ovl2 but when i am creating STO document UB change shipping point at item level in shipping tab system allowing the manual shipping point (1200) but when i enter or save the document system overwrite 1200 to 1000,system consider only automatic determination in shipping point (1000)
Can you please help why i am not able to change the manually shipping point 1200( even i maintained in ovl2 manually shipping point 1200)

Sending a calendar to another country is not supported in many jurisdictions - as it can lead to extra charges for the receiver. As I have no idea what country you are in you can select your country from this list
http://store.apple.com/us/help/print_products/routing
And find out if it's supported in your country and to your chosen destination.
Regards
TD

How can I change the Delta settings

Hello Experts,
I need changed the extraction delta settings in 0FI_GL_4 datasource. Presently Im using in numeric pointer delta process but I want to Time Stamp setting. So please can anyone send me the step by step procedure for the delta settings.
Thank you,
Regards
Sathis

Please don't repeat the same question.
Refer ans here:
FI u0096 GL Delta settings 0FI_GL_4 step by step

Modelling the fields in the cube from different source system.......

Hi,
I need to create one query on the cube.
User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
These are master data fields ( 7 fields in total) from other source system.
Cube gets data from one ODS.
some steps I need to do are :
1) create new source system
2) Create corresponding objects in BW.
3) Model the things in ODS and cube
Can somebody let me know what is the best way/steps to model such scenario.
Thanks, Jeetu

Hi,
Replicate both the data sources to BW.
Create 2 infosources/transformations, map them to respective fields and infoobjects.
Now assign them to cube and load the data
hope this helps.
Rgs,
I.R.K

Changing the LTS and physical source of the presentation fields

I am using 11.1.1.6.2 obiee admin tool, in presentation layer I have 3 different subject areas and multiple folder with different names. I used same field in multiple folder in all the subject areas with same name , in below example I am using same field in subject1 folder-A and same in subject2 Folder-C and so on .If I change the physical source of these fields with new LTS and new logical column, how do I make this change impact to all fields , or should I go field by field delete the old field and add the new field.
please reply with a solution
Example:
Subject1
Folder-A
*field1
*field2
*field3
Folder-B
*field4
*field5
*field6
Subject2
Folder-C
*field1
*field2
*field3
*field4
Folder -D
Folder - E
Subject3
Folder –F
*field1
*field2
*field3
Folder2
Folder3

If same logical column is calling with different names in Presentation layer then you can go for changes and those changes get affected in Presentation layer.
Since all those presentation layer columns are sourcing to a single logical column.
If you I change the physical source of these fields with new LTS as new logical column then you need update Presentation layer manually.
If the changes are related to same logical column within the existing logical table then no need of any more changes.

Change the delta pointer at source system side

Similar Messages

Maybe you are looking for