Change the display name of the Profile Manager Portal?

Hello.
Does anyone know if it's possible to change the name that's displayed on the Profile Manager User Portal? It's using my server name and I'd rather it be something a little more generic? Is this possible?
Thanks,
Kristin.

Hello,
Currently, the Power View report doesn't support the drillthrough feature like "Go to URL".
Personally, I recommend you that submit a suggestion at
https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
For more information about the features supported in Power View, please see
Power View (SSRS).
Regards,
Fanny Liu
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedback
here.
Fanny Liu
TechNet Community Support

Similar Messages

How to get the display name of the dropdownlist?

How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.

I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
          HashMap bleh = new HashMap();
          bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
          Iterator it = bleh.keySet().iterator();
          while (it.hasNext()) {
               Object key = it.next();
               SelectItem selectItem = new SelectItem(key, bleh.get(key));
          //And then later, when you want to retrieve the label
          bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing

How to change the display name in the filter view

Hi,
I have one column "*Year*" and type in case when 1=2 then "product_d"."name" else "calendar_d"."year" end.
I add a filter view for it. but when I select, like 2010, it will display"case when 1=2 then "product_d"."name" else "calendar_d"."year" end" is equal to 2010.
So how can I change it to "Year is equal to 2010"?
Any one have any idea about this?
Regards,
Anne

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

Change display name of the server under Equipment

is it possible to change the display name of the LIVE / PRODUCTION blade under equipment --> Chasis -->Servers to our own naming standards.
Attached is the screenshot of current names.
UCS Manager Version 2.1(3a)

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

How to change the Group Display Name in the UME?

Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

Thank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas

Changing the display name of project file folders for TOC

I'm interested in changing the display names of the project file folders for my TOC. For example, I want to name the folder "01-intro" so that it is short and lowercase. But I'd like the TOC to say "Introduction to the System." I know I can manually rename the folder in the TOC either through its properties or by right-clicking => Rename, but I auto-create the TOC occasionally and I don't want to have to rename every folder every single time.
Does anyone know if there is a way to set a persistent property for the folder so that its display name in the TOC is different? I am using RoboHelp 9. I saw an option called "Detail" in the properties of the WebHelp layout in RoboHelp 8 that seems like it may have done that, but I no longer see this property in RoboHelp 9.
Any assistance would be much appreciated. Thank you.

I think the lack of response confirms that if you are going to use Auto Create, you have to accept the way it is.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to change display name of the attachment item attribute.

Hello Experts
I have a requirement to send a notification with attachment but attachment name should be attachment name,
Is there any way to change the display name of the Attachment
Please advise;
Thanks
Rajesh.

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

Changing the display names of objects in the JTree

Hi All;
Is there a possibility of changing the display name of the nodes in JTree? I mean not the actual name of the JTree object, but only the display name? Is there any method available for that?
Your help would be greatly appreciated
Thanks in advance
Regards Madumm

If your tree node object has application-specific complexity, you should define a custom tree node class and a renderer for that. Or if you just could use DefaultMutableTreeNode, call setUserObject() method with a new String.

How can I change the display name of a contact in my address book?

If I open one of my contacts in the Address Book, the display name is the name of the organization. I want it to be the last name of the individual. How can I change that?

Thank you for your reply. I realize from your answer that I didn't poise my question properly! If I have not entered anything in the 'Display name' field then the message header (i.e. the title of the business card) follows by default the name of the 'Organization'. I wanted to know if it's possible to change this so that the message header of the business card follows the 'Last name' of the person and not the name of the 'Organization'. Thank you!

How can I change the display name when I call someone?

I recently gave a re-provisioned 8300 to a new employee. I wiped out the phone, and re-setup the phone in our exchange server to match the new user's settings.
The only problem he's having is that when he calls someone, the display name shows the previous users name as the person calling.
How do I change that?
Thanks in advance,
howe132

You don't say what model the device is, but if GSM, make sure the SIM card has not been edited to the preview name.
Options > Advanced > SIM card > Menu > Edit Sim Phone Number
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Change the language in the display-name of a train stop

Hello,
does anybody know how to use internationalization in the <display-name> of a train stop?
Bye

Hi,
I use the default model, and when trying to set the Display Name in the View Properties (a train stop), in the train task flow, i can not select a resource boundle key in the expression builder.
If I set something like:
<view id="datosRegistro">
<page>/registro/datosRegistro.jsff</page>
<train-stop>
<display-name>#{viewcontrollerbundle['trainlabel']}</display-name>
</train-stop>
</view>
Nothing appears in the train stop label.
Of course, I have register the resource bundle in faces-config.xml file
Thanks

Dynamic display name of the sender

I have requirement like below:
After creating and executing any Agent/iBOt in OBIEE 11g, the Display Name of the Sender in the From address of email delivered to recipients is showing as "Administrator".
The user who is authenticated and authorized into the OBIEE also created an agent, he is asking that email should show his name in the From Address when it is delivered to the recipients.
I know why this is happening, I have provided the Display Name of Sender as "Administrator" while configuring the Agents at the Enterprise Manager Level.
What I am currently looking is, if there is any alternate solution to Dynamically display the name of the user who creates the Agent in the From address of the email when it is delivered to the recipients.
Thanks in advance
-Bharath

Any body there with the answers !!

Renaming Name of Keyboard, not just the Display Name of Keyboard

I lent my keyboard and trackpad to a friend, and when they were returned, they were named with his name.
I easily changed the Display Name to my own, but the Name in the Bluetooth Preferences panel remains the name of my friend.
I even found the string where his name is embedded - it is within a file called "com.apple.Bluetooth.plist" inside Library > Preferences.
I downloaded the Developer app called XCode, which allowed me to edit a copy of "com.apple.Bluetooth.plist", and put my own name where it incorrectly says my friend's name. I then dragged the copy into the Library > Preferences after trashing the incorrect one.
Proble solved, right?
But on restart - or even after sleep - my iMac alters the corrected file and returns it to the incorrect name - the name of my friend.
Seemingly, it must be using some info in a cache somewhere. So I read that Bluetooth caches may be stored in the PRAM of an iMac, so I tried the technique of restarting while emptying the PRAM by holding Ctrl-Option-P-R, but that did not help. Honestly I am not sure that the PRAM empties when one is using a wireless keyboard anyway, since the Mac is probably starting for awhile before it gets around to checking on its Bluetooth devices. But, in any case it did not work to get rid of my friend's name.
I am *this* close to buying a brand new keyboard and trackpad so I can be rid of the accursed name.
There must be SOME way for my iMac to treat my existing keyboard and trackpad as if they were brand new, and get rid of the damned old incorrect info!
Anyone found a solution to this? I've seen other threads where people failed.

Holy snit, I found the solution.
For the keyboard:
In the Bluetooth Preferences, when you highlight the Keyboard and click the gear, click Rename, and - this is the part that everyone I've read about has failed to do - change the Display Name from, say, Will's Keyboard to Will B's keyboard. That changes the Display Name, which we already knew and which wasn't the point. The point is that it also changes the Name. Then, again change the name back to Will's Keyboard, and both the Display Name and the Name changes to Will's Keyboard.
For the Trackpad:
It doesn't work exactly the same, so be careful! Read the following in its entirety first before following any of the steps or you will be unpleasantly surprised!
In the Bluetooth Preferences, highlight the Trackpad and click the gear, click Rename, and - this is the part that everyone I've read about has failed to do - change the Display Name from, say, Will's Trackpad to Will B's Trackpad (pick the latter name VERY CAREFULLY BECAUSE IT WONT GO AWAY!). That changes the Display Name and it also changes the Name, and you will think everything is going fine. It isn't. Then, again change the name back to Will's Trackpad, and you will find that the Display Name changes to Will's Trackpad BUT THE NAME REMAINS Will B's Trackpad. I SAY AGAIN, THE "NAME" WILL NOT UPDATE CORRECTLY, SO PICK A NAME YOU CAN LIVE WITH!

IP phone display name of the called party with grabage

Hi,
I am running CME with 12.4.14(t) ios. The problem which i am having is that when anyone dial any extension, the name is displayed of the called extension & some garbage charater are shown

Hi,
CSCsj18014 is:
Caller ID string received with extra characters
Symptoms: A caller ID may be received with extra characters.
Conditions: This symptom is observed when caller ID is enabled on both
routers and when the station ID and station name are configured on the FXS
side.
Workaround: There is no workaround.
The reference of FXS ports makes be believe that CSCsj18014 is not the applicable bug. However, in the same results page, we see another bug matching better a problem of garbage w/o FXS ports:
Garbage characters in called name displayed on calling phone
Symptom: Garbage characters in called name displayed on calling phone Conditions: When placing a call from one phone to another phone on CME using 12.4(11)T3, the displayed name on the calling phone gets some unidentified characters at the end of the displayed name after a few seconds have passed. The problem was NOT seen in 12.4(11)T2
Now, the bug toolkit does not give the number for this "related bug" and I was not able to localize it.

How to change the display name for Gmail aliases?

I have a Gmail account with multiple aliases. They look like this:
Joe User <[email protected]> (Primary)
Support <[email protected]> (Alias)
Billing <[email protected]> (Alias)
Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
I have to imagine I can do this. Can someone help me out?
Regards,
Dave

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

Change the display name of the Profile Manager Portal?

Similar Messages

Maybe you are looking for