Change the displayname in the forum profile

hello
can someone's change the displayname in the forum profile. for me nothing happens when I go to change data.
https://www.sdn.sap.com/irj/scn/updateprofile
thangs

People (e.g. who asked a lot of questions without following up on them) misused it, so you cannot change it yourself and it must be unique.
To change it, you can send a mail to sdn (at) sap (dot) com.
Cheers,
Julius

Similar Messages

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • Changing the catalog profile when creating a QN FROM ACTION BOX in transaction QM02

    Hi All,
    When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
    always copied from the QN being preocessed in QM02. (current QN)
    I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
    If I change the catalog profile in the material master, it works, but that is not a solution for me.
    Need the exact point where I can pass in a different catalog code.
    Also, I do not see the new QN number anywhere while debugging.
    PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
    Thanks.

    Hi All,
    When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
    always copied from the QN being preocessed in QM02. (current QN)
    I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
    If I change the catalog profile in the material master, it works, but that is not a solution for me.
    Need the exact point where I can pass in a different catalog code.
    Also, I do not see the new QN number anywhere while debugging.
    PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
    Thanks.

  • Need log of the users who changed the partner profiles.

    Hi,
    Some user has been changed partner profiles of the CUA configuration Setup.
    It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
    It will be appreciate if anybody can help in this issue.
    Thanks,
    Shiva.

    I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
    Now its working fine.
    But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
    And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
    EDIPHO
    EDMSG
    EDP12
    EDP13
    EDP21
    EDPP1
    T002T
    T005T
    Regards,
    shiva.

  • User exit in VA01 for changing the status profile

    Hi Experts,
    I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
    Thanks in Advance:-
    Santosh

    Hi, Santhosh,
    You can use function module "STATUS_PROFILE_CHANGE"
    see the code,
    CALL FUNCTION 'STATUS_PROFILE_CHANGE'
      EXPORTING
        OBJNR                          =  XVBAK-OBJNR
        STSMA                          =  G_STATUS
      NO_CHECK                       =
    EXCEPTIONS
       OBJECT_NOT_FOUND               = 1
       NO_STSMA_CHANGE_POSSIBLE       = 2
       STSMA_NOT_FOUND                = 3
       OTHERS                         = 4
    where G_STATUS is your new status profile. It will update in your screen also.
    Hope this will help u.

  • Changing the default profile

    Is there a way to change the default profile that is assigned to new users? In other words, instead of user JONES being assigned DEFAULT if no profile is specifed in the create user statement, I want to set up the database so that MY_PROFILE is the profile that is defaulted to instead? This is in Oracle9i R2.

    Hi,
    Yesterday, there was a thread with the same subject, and it seems that you can (thanks to Yoann) :
    Can I alter the default profile
    Nicolas.

  • Change the forum

    Hello,
    I had a thread without answers. Now I want change the forum from "CRM Master Data" to "CRM Webclient UI".
    Can I change the forum after I posted a thread?
    Thank you in advance!
    Best regards, Jasmin

    You can click on the Report Abuse button and leave a message for the moderator to move the thread to the appropriate forum in the future.
    Else for the time being you can post the link here and some Mod can move it to the right forum.
    pk

  • Should I change the action profile?

    Hi Experts!
    The message type slf1 has the action profile:
    SMSD_ABA_MLDG_SERVICEVORGANG
    Our Support Desk has some bugs, but it works.
    My question is: May I change the action profile to:
    SLFN0001_STANDARD_DNO?????
    What consequences might occur?
    Thanks for reply!

    Hi Rauno,
    You should definitly copy the current pricing procedure and make your changes to the copy.
    The only disadvantage is that you can't mix old and new flows into e.g. the same billing document ( = pricing procedure is split criterium ).
    But the BIG advantage is that all your old flows will not get inconsistent 100% guaranteed ( when you 'look' at them, or do e.g. VA02 on an old flow etc..)
    rgds
    Dirk

  • Changing the configuration profile to rolled-out iPads

    I need to change the configuration profile of all the iPads that have been configured in my office due to a sudden request by the management. It's a simple checkbox that I can just tick off in iPhone Configuration Utility. However, how do I apply these changes to the iPads? Do I just update the config profile in the config utility, and it will update itself on plugging in the iPads, or do I have to do something else?
    Thanks!

    I don't think this will be a fun experience...if anyone knows of a better way I hope they will suggest it...but the profiles, to my knowledge, can not be incrementally updated...they have to be removed and replaced with a new profile.  We've found you can add a second profile as long as you do it from the same instance of IPCU that it was installed from ( if profile was encrypted), but I don't believe the 2nd profile will successfully install if it has settings that overlap or conflict with the profile installed first.  I've been told, and I believe that Apple is working on resolving issues like this that affect enterprise users.....if  a way exists to do this in IPCU with an incremental update, I'd like to know about it as well. 

  • Okay, don't change the forums anymore!

    No, really.  I think it's actually...... functioning correctly in the new version of Opera 10.51  (PJ confirm?  I know you got it installed, hehe.)  when running under Mask as Firefox mode.  Exciting, isn't it?  It's fast too!!!  (Although, that's probably more thanks to Opera than anything.)  Opera > Chrome again!
    The forums are still mickey mouse point-counting silly places, but I think I can live with that.  I may have to retire from serious anti-Jive campaigning until the next version comes out to break things again...   
    Hope I don't find any unexpected bugs, but it seems we can change the forum (decent) compatibility list to:
    Chrome
    Opera

    Claudio González wrote:
    If you are talking about the extra linerfeeds/carriage returns introduced by the software, the cure is to type Enter twice before starting to write your message. Workaround posted by Curt Y.
    Hmm, that might be changing the behavior slightly but even after doing that (in Opera) hitting enter on a line of text isn't doing what it normally does on Planet Earth.  Still in Planet Jive mode it seems!  Not quite sure yet what the text box rules are for "enter twice" mode.
    Still I think I'll be going back to Chrome again (until that breaks too), as I have no desire for developing bizarre obsessive-compulsive habits before I start typing in every text box I see.
    And people wonder why I damn JavaScript and AJAX hacks to the hells for all eternity...

  • Changing the Status profile in QM

    Hi,
    The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
    This has set the User Status as IMAT: Material is not correct.
    Due to this, unable to do any of the further processing.
    In QA02, the Status Profile cannot be changed/deleted.
    So how to remove the Status Profile from the Quality Inspection Lot?
    Request your help.
    Regards,
    Sankar.N

    Hi
    An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
    Leon.
    Regards.

  • How to track the User who has changed the System Profile Options

    HI ,
    The system profile options are changed by one User (Ex: XX123).
    Here, the user XX123, he is not having any sys admin responsibilities .
    He is having only I-proc responsibility attached .
    Is there any chance to update the system profile options , through I-proc.

    Pl post details of OS, database and EBS versions, along with which profile options have been changed.
    AFAIK, IProc responsibilities do not have access to change profile options.
    HTH
    Srini

  • How to change the status profile of equipment?

    Hi Experts,
    Is it possible to change the user status profile for already created equipment? I tried to change the assignment of status profile to equipment category and found it works only for new equipments. It is not applicable to already created equipments. The status of the status profile is already used in equipments.
    Please suggest and do the neeful.
    Thanks and best regards,
    Praveen.

    No you can not change status profile assigned with already created equipment.
    Eg. You assigned status profile 00000003 to equipment category M of equipment. so whnever any new equipment created will get status profile 00000003 only.
    For your case, dont make any change status profile no .00000003--> make whatever changes you have to made about status naming,sequence keeping same status profile.
    After that goto equipment change master edit>change category>selet same category for assignment. so equipment will get same status profile with status changed.
    Hope this will help you.

  • CS5 Device Central Stage.width/Stage.height update problem when change the device profile.

    When creating FL 3.0/3.1 app   and testing it at the CS5 Device Central if you change the profile of the active device(select different phone with different screen size) Stage.width/Stage.height could't change. Always stays the same as the first device's Stage.width and height. Even if you add addListener with Delegate nothing happends. Also it effects to Screen Oriantation. It looks like a problem or is this a bug?

    Having the same problem, though I can't get it to connect even once. I just started researching the problem tonight - no solution yet...
    I'm on Windows 7 Pro 64-bit, Production Premium CS 5.5.
    I've got no other internet issues, Adobe update works fine.
    Please - Anybody have an idea how to troubleshoot this problem?
    Thank you.

Maybe you are looking for