Change the Encryption key

I Have a Linksys WRT54G How Do You Change The Password

Hi mrgw11. Are you referring to the password to the setup page of the router or the password to the wireless network? If it's the former, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f8ddfa094408462c86100958adba3817_3976.xml&pid=80&r...
If its changing the password to the wireless network, please refer to the link given by FurryNutz. 

Similar Messages

  • Need Help on How to Change The Encryption Key and or Change security settings

    Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
    Message Edited by DARK_MARIO on 01-06-200706:10 PM

    Hi…
    In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

  • How do we change the encryption key???

    I got a hold of some nasty roommates who won't pay their part of the bill so I wanted to change the encryption key so that they couldn't use the wireless anymore, or at least until they pay me their portion of the bill.
    Thanks! -Leah

    you can refer this link to setup wireless security on your router

  • How do you change the shortcut keys for Firefox in Welsh For Mac?

    I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
    My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
    Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
    Thanks.

    This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
    You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
    English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
    You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
    The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
    I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

  • T.code FS00: changing the SORT KEY in the 'Control data'

    Hi All,
    I need to change the SORT KEY in the 'Control data' of a G/L master data.
    Is there a SAP standard program by which the field 'Assignment' is updated.
    Thanks
    Gandalf

    Sorry,
    i did't mean updating a field ...
    I meant:
    is there a program which changes the content of the field 'Assignment' according to the new content of the field 'Sort key'?
    Thanks

  • I need a help to Configure the Encryption Key of btm

    I have download OracleBTM_1of2.zip and I am trying to install it, so I am following this link
    http://download.oracle.com/docs/cd/E11857_01/install.111/e20124/install.htm#sthref20
    how can I do this ?
    Configuring the Encryption Key
    You must configure the encryption key on each application server that hosts a Business Transaction Management component. To configure the encryption key, create a Java system property named com.amberpoint.security.encryption.aes.defaultKey in the server and set its value to your encryption key, for example:
    -Dcom.amberpoint.security.encryption.aes.defaultKey=MyEncryptionKey
    where MyEncryptionKey is a base 64-encoded, AES, 128-bit key.
    After generating your encryption key, you can copy and paste it in order to set the value of your com.amberpoint.security.encryption.aes.defaultKey property. If your key includes special characters, you should enclose it in double quotes, for example:
    -Dcom.amberpoint.security.encryption.aes.defaultKey="oylJKoTGXTHasOYwtjwA7g=="
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    You use the command line tool btmcli under the 'tools' directory:
    ./btmcli.sh encryptpassword -password mypassword
    ARECQVBBRVMCX2FwXzEyOAPKsNtwbzzI8j5g7u8UBV7qvp8QOnCA8Tj/ZJiSjqJa/w==

  • I need help to Configure the Encryption Key of btm

    In order to monitor the osb 11g.
    I have download OracleBTM_1of2.zip and I am trying to install it, so I am following this link
    http://download.oracle.com/docs/cd/E11857_01/install.111/e20124/install.htm#sthref20
    how can I do this ?
    Configuring the Encryption Key
    You must configure the encryption key on each application server that hosts a Business Transaction Management component. To configure the encryption key, create a Java system property named com.amberpoint.security.encryption.aes.defaultKey in the server and set its value to your encryption key, for example:
    -Dcom.amberpoint.security.encryption.aes.defaultKey=MyEncryptionKey
    where MyEncryptionKey is a base 64-encoded, AES, 128-bit key.
    After generating your encryption key, you can copy and paste it in order to set the value of your com.amberpoint.security.encryption.aes.defaultKey property. If your key includes special characters, you should enclose it in double quotes, for example:
    -Dcom.amberpoint.security.encryption.aes.defaultKey="oylJKoTGXTHasOYwtjwA7g=="

    You use the command line tool btmcli under the 'tools' directory:
    ./btmcli.sh encryptpassword -password mypassword
    ARECQVBBRVMCX2FwXzEyOAPKsNtwbzzI8j5g7u8UBV7qvp8QOnCA8Tj/ZJiSjqJa/w==

  • Changing the number keys to lower case

    how can I change the number keys on my air book so that I don't have to use upper case and use all the &,",' on the upper case?

    First of all be sure the font you're using has small letters and not just caps. If it does, then click the tiny triangle at the far left of the options bar and choose Reset Tool.

  • Change the license key for BOXI3.1 after installation

    Are there problems if i change the license key for BOXI3.1 after installation?
    (Not performing a upgrade from trial version)
    Or do i have to do a re-installation instead?

    Hi,
    Sure you can change the license key, without re-doing a complete install of BO XI. Just go to CMC->Lisence Keys, and add your new product key.
    Then you 'll see bellow, the new information about u key (CPU/Date limitation).
    Regards
    Olivier

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • I want to change the "f" keys on my keyboard, how do I do this?

    hey, I want to change the "F" key functions on my keyboard, how do I do this with mozilla?

    don tishman wrote:
    When my Mac Pro starts up, a rectangular magnyfying glass appears, how can i get rid of this magnyfying glass.?
    By posting the same question numerous times, you are more likely to make people ignore your posts than help. You have been given one reply 3 threads back. Go to System Preferences > Universal Access > and turn off Zoom under (Seeing)
    Pete

  • I want to change the command keys on my Belkin wireless number keypad and on my Mac keyboard. How can I do that?

    I want to change the command keys on my Belkin wireless number keypad and on my Mac keyboard. How can I do that?

    Command key - this one?
    I want to change the command keys
    You want to change it to what?

  • Another user changed the primary key

    am using jdev 11.1.1.5.0-adfbc
    after each and every insert while saving the record
    error throws like this >>>Another user changed the primary key
    what should i do to avoid this?
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">
       <AppModuleConfigBag ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
          <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMLocal" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
             <Database jbo.locking.mode="optimistic"/>
             <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
          </AppModuleConfig>
          <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMShared" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
             <AM-Pooling jbo.ampool.dynamicjdbccredentials="false" jbo.ampool.isuseexclusive="false" jbo.ampool.maxpoolsize="1" jbo.ampool.resetnontransactionalstate="false"/>
               <Database jbo.locking.mode="optimistic"/>
             <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
          </AppModuleConfig>
       </AppModuleConfigBag>
    </BC4JConfig>

    some suggestions
    JBO-25014: Another user has changed...
    http://adfhowto.blogspot.com/2010/12/troubleshooting-another-user-has.html
    Another user has changed the row with Primary key

  • Resetting the encryption keys to default in Waveset

    Hi All,
    Is there a way to reset the default encryption keys on IDM?
    I was trying something and generated a new server encryption key and now I can't get my AD resource adapter to talk to the gateway.
    Any help would be highly appreciated.
    Thank You
    Vamsi

    Try finding the solution on http://www.encryptionkey.info/

  • How can I change the input key language between different languages ?

    the language can't be changed when i press ctrl+alt

    The default keys to rotate the layout is a key combination (Ctrl+Shift or Alt+Shift) that can easily be used in Firefox to activate a menu item.
    It is better to disable the key sequence to rotate layouts (Alt+Shift or Ctr+Shift) to avoid an unintentional switch and instead assign a specific key (Alt/Ctrl + Shift + number) to switch to the keyboard layout.
    Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence
    http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    You can also use the Language bar on the Windows Taskbar.<br />
    You can make the Language bar visible via the right-click context menu of the Taskbar: Toolbars > Language Bar.
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)

Maybe you are looking for

  • Even after being "fixed", my connection is still u...

    Been with BT since late December, using infinity 2 with HH5. Live in a block of flats. When we first got the package we were being disconnected every few hours, often several times per hour. Finally got some help from a mod on here who ran some tests

  • Problem with ALV grid in edit mode

    Hello, gurus! I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell.  And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does no

  • Personalization and Default values in selection screen variables

    Hi everyone, I have certain questions regarding Front end part:- 1)     Can we have multiple personalizations for a single user in Web templates; I know it is quite possible in BEx using Variants. Is there any such approach or any other solutions reg

  • Cannot find line where veiw,or bookmark is on top of page

    very top of page has the word veiw and bookmark but the line has disapeared

  • Elisa for i586: try to build gdk-pixbuf, error with libtool

    Hi there! I set up Archlinux on my Barebone, great job with the "new" i586 repo! i try to build to build the packages on my laptop by simply editing my makepkg.conf to: CARCH="i586" CHOST="i586-pc-linux-gnu" CFLAGS="-march=i586 -mtune=generic -O2 -pi