Change the existing Reports to point to a renamed Universe

Hi All,
I have a universe named X1 and today I wish to change the name of the universe to X2.
I have around 150 reports pointing to the universe X1.Is there a way to change the all the DeskI reports to universe to X2 at one go.
I know that In deski we can go to the data manager >definitions> universe and then select the universe in the list.
The version I am using is Business Objects XI R2 and all the reports are DeskI reports.
Do we have any solution instead of going and changing it individually?
Regards
Prashant

Hi.
Maybe other option could be importing the universe using universe designer, in universe params change the name and export to CMC in the same path .
The system should ask you about if you want update the universe, changing the name in all the reports.
Please, try before with one test universe because i'm not sure....
Good luck!

Similar Messages

Adding a new parameter to the existing report in GL(GLRTR1.rdf)

Hi Friends,
I was new to this oracle Forums and i am working as a oracle apps technical consultant, i have been assigned a task in GL module to customise the existing report in GL the report name is "GLRTR1.rdf" (available in vision-demo) and its concurrent program name is "Trial Balance Summary-1" this program has the predefined parameters like:
(Parameter Name : Values to be entered/as u wish)
Pagebreak Segment : Company
Pagebreak Segment Low :01
Pagebreak Segment High:01
Currency :USD
Period Name :feb-2003
Amount Type :PTD(Period to Date)
user-parameters to be added to above parameterlist
costcenterfrom :segment2 value of (GL_CODE_COMBINATIONS table)
costcenterto : -- do---
Now what i want is i want to add a user parameter to this concurrent program like costcenterfrom and costcenterto these are optional parameters and the its value set type is TABLE and i want to display value is SEGMENT2.
when i select the parameters along with predefined and costcenterfrom and costcenter to the report output should be between the costcenter from and costcenterto along with predefined values,
and if i am not giving any value to the costcenterfrom and costcenterto parameters then the report out put should be based on the above parameters ie predefined parameters only.
i think u haveunderstoood the requirement and does any one please tell me know the solution for my problem its very urgent.
i will be very greatful to them.
Regards,
Azeez
[email protected]

Hi,
Please check whether the auth object is switched on for the info-provider or not. By default its switched on if the info-object is part of the info-provider.
To switch it on again, enter the info-provider name in the section 'Checks For Info-provider'. Click on pencil button to enter into change mode and select your auth object.
Hope it helps
Thanks
Soumya

Dev-client not letting change the existing record in PA30

Hello Experts!!
       I dont know I have to ask this question here . I have created ALE link between our DEV system and QA system for our dry run .Two days before Basis team copy the data from PRD to Dev and also in Qa6 to make them in sink. When user is changing data in DEv6. They are getting an error message ,the is maintained in Dev_100. its not changing the existing record .Can some body explain me whats happening here .
Cheers
Usman

Hi Usman .
          youll say " here he comes again " . Any way you need to run <u><b>tr.BDLS</b></u> , It basically change the system name in SCC4 and also update the tables which kept the system name and after that youll be able to change the existing record in the system .
         hope thisll give you the solution .Dont forget to award points
Thanks
Saquib khan

Pls can any one suggest me the Existing Report Name for Active and InActive

Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .

hi,
my transaction is VL02N change outbound delivery.

Unable to change the existing sales order

Hi
I need to change the existing sales order document which was already created and replicated into R/3.The following error has been giving
"Document is being distributed - Changes are not possible".
Can anybody help me how to change the document.
early response would be rewarded,.
Regards
Vikram

Hi Vikram,
The problem is caused by a program error.
Please follow the SAP Note for complete information.
SAP Note : 718065
Regards,
Johnny.
Reward with points if it helps.

Can we change the Existing scenarios name in a outline

Hi All,
I have a requirement like change the Existing scenario name to another name...
Ex: Existing scenario name Scenario -> "Budget"
After changing scenario name Scenario-> Fcst_Buget
Can we do this???
If yes, what are the things i need to take care because we have data for that scenario...please let me know...
Please update on this ..its urgent

You can absolutely change the member names.
Are you concerned about the impact on data loads, formulas, calcs, etc?
An easy way to have your cake and eat it too is to assign an alias to the member so that Budget now becomes Budget with an alias of Fcst_Budget. Whatever artifacts refer to the old name continue to do so and from a reporting perspective you reference the alias.
Or you can reverse it so that the member name now becomes Fcst_Budget and the alias is Budget.
Your choice, but I think the former is what you want.
Regards,
Cameron Lackpour

How to write a pgm to change the existing encrypted password

Hi all,
can anybody tell me how to write a pgm to change the existing encrypted password.
thanks in advance.

Well, it's going to depend on how it's implemented in the current system.
But basically it's going to look a lot like the current login actions. Presumably you have something that takes the user ID and password, encrypts the password, looks up the encrypted password in the database matching that user ID, and compares them. This functionality would also take a new password (preferably twice so they can be checked for consistency), and if the existing encrypted passwords match, it will encrypt the new password and put it in the database where the old one was.
And if the application has a mechanism for new users to sign up, it'll look a lot like this as well.
But I'm just guessing. This is all going to depend on how the existing functionality is written. Probably the best thing you can do is talk to a programmer at your organization who has worked on the application, and ask them for help.
Hope this helps anyway.

How to change the existing sap logon ticket

HI
I did the System copy from my production server to Quality server.
Now everthing is working except Single Sign On. This is due to SAPlogon ticket.
the SAPlogon ticket show the PRD sid. I am not able to change the existing sid in ticket.
Tell me how to chage the old saplogon ticket with new one.
Workaround i did in my server.
generated the new certificate for Quality server and try to import in R/3 000 client. but not successful.

Hello Lee,
You dont have to import the certificate from R/3 into portal
we have to generate the certificate in portal and then import in R/3
To generate the portal certificate in quality Portal system and uploading in R/3,please find the method:
Log on to the Visual Admin of Portal with administrator id and password. Go to the following node: Server 0 1_34158->services and then Key Storage
In Key Storage, go to TicketKeyStorage
Under Entry, choose Create.
The Key and Certificate Generation dialog appears
Enter the Subject Properties in the corresponding fields
CN=<Common Name>, OU=<Organization Unit Name>, O=<Organization Name>, L=< Locality Name >, ST=<State/Province>, C=DE. give SID of portal in CN
Give the Entry name as SAPLogonTicketKeypair.
Select Algorithm as DSA,also click on store certificate and then generate
You will see along with SAPLogonTicketKeypair, SAPLogonTicketKeypair-cert will also get generated.
Now we will have to import this SAPLogonTicketKeypair-cert in the ABAP systems
First we will have to download the certificate from the portal.
Now logon to the SAP Netweaver Portal with user administrator
Go to System Administration->System Configuration and then Keystore Administration.
In the Content tab you will find the list of certificates
We have to download SAPLogonTicketKeypair-cert .Click on Download verify.der file
To your desktop
Now we have to import the certificate in ABAP system.
Log on to the ABAP system 000 client and use T-Code STRUSTSSO2
Under Certificate, click on Import certificate
Give the path of verify.der file. The file format should be Binary
And upload it.
Now you can see the certificate has been uploaded. Check for the validity
Now click on Add to certificate to add this.
Now click on Add to ACL.
Enter System ID as the portal SID(i.e is SPQ) and client as 000 and click on Ok
Then save your entries
Hope this makes it clear
Rohit

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

Change the HTML Report format the same as TestStand 2010 SP1 in TestStand 2012

I have a lot of test steps (~10K) that gets executed and the indentations on HTML report format in TestStand 2012 gets too deep. I have to slide the horizontal bar to the right to see the report when l'm in the middle. I did not have this issue in TestStand 2010 SP1.
Is ther a way to change the HTML Report format (style) the same as TestStand 2010 SP1 in TestStand 2012?

dexrays:
We are currently investigating this issue. In order to help us with the investigation could you post a sequence file and configuration that reproduce the problem? The configuration file is located in C:\ProgramData\National Instruments\TestStand 2012\Cfg\ModelPlugins\ResultProcessing.cfg for Windows Vista / Windows 7 or you can use the Cfg link in the TestStand 2012 installation directory.
You can use the Legacy Model Switcher (included in TestStand 2012) to use the legacy models instead of the new models. The legacy models are more backward compatible, however, this also means that you will not be able to use the improvements in the new models (for example, the new plug-in architecture). If this is acceptable then you can use the legacy model switcher to switch to the legacy models. The Legacy Model Switcher is located in the Start Menu under Programs->National Instruments->TestStand 2012->Tools->Compatibility. For more information on Legacy Model Switcher please read the online help.
Thanks for your report and for your help with diagnosing this issue.
- Francisco

Can I add multiple attachments to the existing report

Hi, i just wanted to know that can i add multiple oracle attachments to the existing report which shoots a PDF report as an attachment in an email. it is done by XMl bursting. so please anyone let me know
Thanks in advance

look for help on $ORACLE_HOME/reports/distribution/distribution.xml
<?xml version = "1.0" encoding = "ISO-8859-1"?>
<!DOCTYPE destination SYSTEM "file:$ORACLE_HOME/reports/dtd/distribution.dtd">
<destinations>
<foreach>
<mail id="ex2" from="&<*email_id*>" to="[email protected]" subject="&<*subject*>">
<body srcType="text">
Dear Sir,
Please See Attachment.
</body>
<attach format="pdf" name="report1.pdf" srcType="report" instance="this">
<include src="mainSection" />
</attach>
</mail>
</foreach>
</destinations>
email_id and subject is group level field in your query.

HT2204 how to change the existing ID form App Store

how to change the existing ID form App Store

You can tap on the id in Settings > iTunes & App Stores and log out of the account and you can then log in with a different account. But any content that was downloaded via the currently logged in account will remain tied to that account (so only that account can download updates to its apps), and if you turn on automatic downloads for an account, use iTunes match or re-download past purchases then you risk tying the device to that account for 90 days : http://support.apple.com/kb/HT4627

Can I change the record an EJB points to from within the bean?

I have a problem which I hope someone can help with.
I'm programming an EJB application which references several 'price list' type tables. An order will contain several option selections, which reference options, which each have an associated price. A system administrator is going to have to change and update these prices as tim egoes on, and may want to remove options etc. In order to ensure that existing orders don't have their values changed as a result of this we've decided that, when options have their price changed, we actually create a new option record, setting an end_date on the old option record to signify that it's no longer valid for new orders being raised. In the option Beans set cost method, I set the end_date property of the bean and call the create method of the options own home interface.
My problem is this: At the moment I return the newly created option as a return value of the setCost method but I feel this is a little graceless. Ideally I'ld like to change the bean to point at the new record as part of the set method itself, that way, to the client it would appear as if tey were still looking at the same bean but with an updated price, which is what you'ld normally expect from a set method. Can this be done?

Um, yeah - graceless is a good word. Essentially, you've stuck business logic into the EntityBean (I'm guess that's what you're using for data persistence). What you need to do is move the Option.create() method out of the EntityBean and use a StatelessSessionBean to execute the logic: update the old Option record, create the new one, then return the result.
As an aside, it's considered Not Very Good Practice to have client applications directly accessing EntityBeans: serializable DataObjects (e.g. JavaBeans, not EJB) or ValueObjects (non-"changeable" DOs) are better at passing data back and forth between client applications and application container. Ideally, this flow is like this:
client <- VO -> SSB <- DO -> EntB
This lets the EntityBean just worry about getting data in/out of storage, the (business) logic resides in the StatelessSessionBean and the client interacts/shows the data.

Changing the existing dataset

I have a report that has been developed by a past developer and for the life of me cannot understand how he even created it. I need to change the list of database fields in this report to include an additional field. But the report is not connected to a db and receives the sql command by setting the rpt properties from an application. I have the code for the app and have changed the SQL statement to include the new fiield - but i can't find anyway of adding this field to the report without it being connected to a db. Any thoughts on this are greatly appreciated. If you need anymore information, just ask.

Are you sure you are going to be developing in VB .NET?It is deffinitly VB .NET using Visual Studio 2008. I have the code for the app.
If you don't know then not sure I can help you
As for class path and xml it could be either JDBC database driver or could be ADO.NET and a XML file with the structure embedded in it.
It is an ADO.Net driver. The rpt object is created in the VB code and all properties for the report are set from the code - including the command object and the db connection.
So what database are you connecting to and how are you creating the updated field list?
This is the whole issue - i have the db in MySQL but can't seem to recreate a connection in the report to the db without creating a new connection.
What version of Crystal Reports Designer do you have installed, for editing reports? If you don't have a Designer then you'll be doing htis in the .NET IDE?
correct - i am using the .NET IDE for the report edits.
Either way, set Location to what ever DB source you are using.
Again - this is the whole issue. I can't create the connection on the existing command without the classpath or xml file. The xml file doesn't exist and I am not sure what the classpath is.

Change the existing Reports to point to a renamed Universe

Similar Messages

Maybe you are looking for