Change the extractor structure in standard extractors?

Hi, is it possible (and wise) to change the standard extraction structure on the standard extractors?

Hi Rune,
Yes you can change the standard extract structure for the standard datasources.You can write a code for enhancing extract structure in CMOD and you can add fields to the standard extract structure.For LO datasources you can customize the extract structure as well.You can do it in Extractor maintainance and add fields from pool to extract structure.
Hope this clears
Regards
Karthik

Similar Messages

How to change the extractor's method?

Hi all,
I get a problem by extracting data from r3 to bw. When I transfer the data, the system told me that the extractor's method "v" is not acceptable. So I want to change the extractor's method in the sap r3 system. Is it possible? And how can I do it?
Thanks a lot!!!
Oliver

The solution is simple. You need not chage the POST method at all for your requirement.
In the step where you give the work item to the user i.e. CHANGE method of FIPP, make sure that the 'Advance with dialog' is checked in the 'details' tab of the activity step.
Then in the step where you execute the POST method just assign an agent (using rule or role or organizational unit or job or position or etc.............) and run it in the foreground. Do not check 'Background processing' in the task's 'basic data' tab. For this step also make sure that the 'Advance with dialog' is checked in the 'details' tab of the activity step. Make sure that the task that runs the POST method is classified as a General task in 'agent assignment'.
If you follow this you wont have two separate work items being sent to the user. The user will just receive one work item, he verifies the details and clicks the post and the document gets posted under the user's id. Also if you had noticied, if you POST in the background the USNAM field in table BKPF will have the value WF-BATCH. But if you follow this and process it in the foreground it will hold the user's id.
Let me know if you have any doubts.

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Changing the directory Structure of Jsp and web.xml files

Hi,
I am using the JDeveloper 11g preview. Can any one tell me how to change the Jsp and web.xml files ( not in WEB-INF directory of the application) to another directory.
Thanks in Advance
Gopal

Hi Frank,
Is it possible for me to change the folder structure which JDeveloper is providing for web project?
By default JDeveloper is giving the following folder structure.
In the project's root folder there is a public_html and src folder along with .jpr file.
In public_html folder thre is an WEB-INF folder and a jsp file
In WEB-INF folder there is an classes folder along with web.xml file.
I need to have the following folder structure :
The WEB-INF folder should be in root folder of project not in public_html folder
src folder must be in WEB-INF folder.
Thanks in Advance
Anil Golla

Changing the extract structure MC02M_0ITM

Hi,
When I am trying to change the extract structure MC02M_0ITM, I am getting the following error:
"struct. from appl. 02 due to open v3 proc. not changed -> Long text" , "Message No. MCEX 140". All I was doing was adding more fields from communication structure to extract structure and I am getting above error message. Can someone shed some light on that. Appreciate your help. Thanks.
Wen.

Hi Wen
You have to
1) Clear LBWQ Queues if you are using Queued delta
2) Move all records from RSA7 - two times to BW under delta update call from BW - so that the records stored for repeat delta are also emptied
3) Empty the statistical set-up table - LBWQ transaction in R/3
then you can modify the structure in LO cockpit
Arvind

How to change the case structure to string input?

Hi,
I have the inner case structure that it will decide to set "DC Voltage" or "DC Current" mode. The "Output Function" contained the selection of function "DC Voltage" or "DC Current". So far it only work with DC Voltage not DC Current. My question is how do I change the case structure to string selector? When the output function is selected to DC Voltage then the case structure is selected DC voltage case. Please help Thanks.
Attachments:
test.vi ‏35 KB

You don't really need to convert the value to a string? The problem is that the value of the individual ring items are not 0 and 1, as you assumed. The values generated by the controls are:
DC Voltage: 1006
DC Current: 1007.
You can find this out by viewing the properties for the "Output Function" and going to the "Edit Items" tab.
So, all you need to do is change the 0 to 1006 and the 1 to 1007 for your case items.
By the way, your sequence frame serves no purpose.

How can i change the windows structure into mac structure

Before i had a mac i used my iPod on a windows computer. When i connect my iPod to my mac i see that i can only repair my iPod. I can't update . It sais that only Ipods with a mac structure can be updated.
So is there a way to change the windows structure to a mac structure?

You cannot change a Windows iPod into a Mac iPod without restoring it, which erases its contents. To restore it, use the repair button you saw.
(24236)

Changing the std structure

hi
I am changing the std structure PRODHS
so I have created the domain zprodh1and I need to add it to std data element prodh1.
I have given the access key and entered in change mode for the data element ,then it is showing in display mode ,I am unable to change it to change mode to do necessary changes to the data element(toreplace std domain with customized domain zprodh1)
plz advice me
thanks
karna

hi
it is reqt of changing the product hierarchy level from 3 to 5.(PRODHS)
it is a 18 character word with 5/5/8. Now I need to change to 3/3/3/4/5.
so for that system already define 9 std data elements.I created teh respective domains with required lengths,now I am changing the data elements with these domains ,I am having the access key for changing the data elements,but it is displaying in display mode,I am unable to replace the std domain with customed one.
regds
karna

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.
<b>
How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

How can change the folder structure in Bex Analyser to match the Web

Hi Experts,
When I create a report using the Web Analyser and save it in My Portfolio or Bex Portfolio, I can't find the report (or folders) in Bex Analyser.
How Can i change the folder structure in Bex Analyser to match the Web Analyser?

Hi Reddy,
       As u have created reports and saved it in BEx portfolio or My portfolio it will be saved in the KM folder which is known as Knowledge management folder for the KM services such as feedback,rating etc.So u cant view them when u open in web analyzer.U can only see them when u save in favourites or the roles folders.
                          Hope this helps
                     Sunil Reddy

Unable to change the Extract structure

Hi All,
In LBWE in R/3, I need to the change the extract structure MC02M_0HDR for DataSource 2LIS_02_HDR, by including some fields using the maintenance tab, After doing the required changes when i give "continue", the system is throwing me the following error -
<b>"Struct. from appl. 02 due to open V3 proc. not changed".</b>.
The long text of the error message shows -
Diagnosis
Changing the extract structure MC02M_0HDR of application 02 is not recommended as there are no V3 update entries for the update module MCEX_UPDATE_02.
If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
Procedure
Start the V3 update and delete those update entries that are already incorrect. You will find these in the update overview.
Kindly reply me as soon as possible in this regard.
Regards,
Manickavasagan

Hello,
in transaction sm37 in the source system, you will find a job starting with LIS-BW-VB_APPLICATION*. Please select the job related to your application and in the menu Job->Delete, delte the same which is in the released state ready to be executed.
then you can go ahead and enhance the extract structure.
Hope it helps.
thanks

CRM - change the selection fields in standard extractor

Hello everyone!
I would like to change the selection parameters for the DataSources 0CRM_SRV_PROCESS_H and 0CRM_SRV_CONTRACT_H in order to include the field CHANGED_AT. However, in the DataSource definition this field appears grayed out (even in process mode).
Is there any way I could change this?
If not, I was thinking about appending a custom field with the the same information and include this in the selection criteria. Would this work?
If not, could I create a generic DataSource whose function module would internally call the standard DataSources own FM with the standard selection criteria and then filter it out further with my own criterion?
Performance is not really an issue here.
Thanks in advance for any input on this!
Best Regards,
Luís Andrade.

Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun

Script : how to change the Field name in standard program(ZM_MEDRUCK)

Hi Experts,
I am working with SAP SCRIPT. i need to change the Field Name that is PO NO to Document No & PO DATE to Document Date.
These are assigned in data declaration as gv_name and gv_date.
Can anyone help me to change this Fields.
Regards,
Vijayan.R

Hi,
You can archive this by making change in SAP script only. You don't need to touch the standard prgm.
Debug the script and find it out which fields (In script editor) are printing these text on layout... then just replace them by creating your own text...
You can create a text in TTDTG table,, like ZZPO_NAME = ( Document Name),, and use this filed in the script editor.
&ZZPO_NAME&

Change the extractor structure in standard extractors?

Similar Messages

Maybe you are looking for