Change the functionality of the keyevents according to the scene that it i
I am a student and I am doing my tesis about authoring tools.
I have obtained to give the same functionality to a keyevent for all the scenes, however, I am trying to change the functionality of the keyevents according to the scene that it is at the moment but I dont know how to do this.
can anybody help me???
Thanks for your help.
Could you help us in a specific issue? We have three scenes. Hscene_1, Hscene_2, Hscene_3. Pressing the green button we want that; if I am in the Hscene_1 it passes to Hscene _2 and if I am in Hscene_2 it happens to me to Hscene_3
we are waiting your answer.
Thanks
Similar Messages
-
Time and date on the laptop is not in accordance with the current.
1. Product Name and Number
HP G42-360TX
2. Operating System installed (if applicable)
Windows 7 64-bit
3. Error message (if any)
Time and date on the laptop is not in accordance with the current
4. Any changes made to your system before the issue occurred
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
Time and date on the laptop is not in accordance with the current. I've tried to change it manually, but it will change back to yesterday's date.
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
whether it was the CMOS battery is weak? when I bought the notebook in 2011Have you tried setting it to synchronize with an internet clock...click the date in the lower right corner...change date and time settings...internet time. Also check the time zone.
-
We have SharePoint 2013 site configured with SSL and we have developed a provider hosted app which interacts with SharePoint list.
If we try accessing the Provider hosted app from the SharePoint site with HTTP [http://mysharepointsite.com/] there are no any errors thrown.
But whenever the same Provider hosted app is tried accessing from the same SharePoint site using https address
[https://mysharepointsite.com/] we are getting below error:
The remote certificate is invalid according to the validation procedure.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[AuthenticationException: The remote certificate is invalid according to the validation procedure.]
System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) +2983172
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) +8530566
System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) +230
System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +645
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +9
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) +87
System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) +1467
System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) +84
System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) +22
System.Net.ConnectStream.WriteHeaders(Boolean async) +761
[WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.]
System.Net.HttpWebRequest.GetResponse() +8534156
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
ProviderHostedHTTPSWeb.Default.Page_Load(Object sender, EventArgs e) +348
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
We have already added the certificate used for the SharePoint site and the provider hosted app in the SharePoint central admin trusts.
Any idea's how can I resolve this issue?Hi,
According to your post, my understanding is that you failed to access provider host app using https.
The reason for this is that SharePoint implements its own certificate validation policy to override .NET certificate validation.
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
For more information, you can refer to:
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Calculate the performance of an activity according to the hours worked
Hi for all,
I need to calculate the performance of an activity according to the hours worked by anyone. Someone could tell me how can I do this?
timetable of staff
ID HR1 HR2 HR3 HR4 DAY
1 492 720 780 1080 Monday
1 612 720 780 1200 Tuesday
1 492 720 780 1080 Wednesday
1 612 720 780 1200 Thursday
1 492 720 780 1080 Friday
2 492 720 780 1080 Monday
3 492 720 780 1080 Saturday
SQL> Select to_date(to_char(trunc(sysdate) + 492/1440,'dd/mm/yyyy HH24:MI:SS' ), 'dd/mm/yyyy HH24:MI:SS') from dual;
TO_DATE(TO_CHAR(TRUNC(SYSDATE)
20/01/2011 08:12:00
Table Holidays
ID DATE_HOLIDAY HOLIDAY
1 01/01/2011 Holiday X
1 03/15/2011 Holiday Y
1 07/04/2011 Holiday Z
2 01/01/2011 Holiday X
Input Values
Start Date : 17/01/2011
Qtd Days : 0
Qtd Hours : 11
Qtd Minutes: 0
Result
18/01/2011 13:24Regards,Okay here is my second attempt.
With schedule_of_work As
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Monday' Day_of_week from dual union all
Select 1 ID, 612 HR1, 720 HR2, 780 HR3, 1200 HR4, 'Tuesday' Day_of_week from dual union all
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Wednesday' Day_of_week from dual union all
Select 1 ID, 612 HR1, 720 HR2, 780 HR3, 1200 HR4, 'Thursday' Day_of_week from dual union all
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Friday' Day_of_week from dual
), parameters AS
/* Creating a single row of input values that can be used multiple times */
SELECT TO_DATE(:job_start_date,'MM/DD/YYYY HH24:MI') AS job_start_date
, TRUNC(TO_DATE(:job_start_date,'MM/DD/YYYY HH24:MI'),'IW') AS beginning_of_week
, NVL(:days,0)
+ NVL(:hours,0)/24
+ NVL(:minutes,0)/(60*24) AS job_length
FROM dual
), holidays AS
SELECT TO_DATE('01/01/2011','MM/DD/YYYY') AS dt FROM DUAL
), date_range AS
/* Trying to generate a date range that should encompass the maximum date it would take
* to complete the task. Rough estimate is number of 8 hour work days plus a padding of 10 days.
* You may want to adjust this to something more suitable for your business or set it to an artificially
* high value. Be aware of possible performance implicications the higher you set it.
SELECT TRUNC(job_start_date) + (ROWNUM - 1) AS dts
FROM parameters
CONNECT BY ROWNUM <= TRUNC(job_length*24/8) + 10
), schedule_as_dates AS
SELECT sowo.id
, sowo.day_of_week
, dara.dts
, holi.dt
, CASE
/* Only perform the effective hours when the day is not a holiday
* and it matches a date in the date range. Otherwise set effective hours to midnight
* making the running sum below zero.
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR1/(60*24)
ELSE dara.dts
END AS start1
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR2/(60*24)
ELSE dara.dts
END AS end1
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR3/(60*24)
ELSE dara.dts
END AS start2
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR4/(60*24)
ELSE dara.dts
END AS end2
FROM date_range dara
LEFT JOIN schedule_of_work sowo PARTITION BY (sowo.id) ON sowo.day_of_week = TO_CHAR(dara.dts,'FMDay','NLS_DATE_LANGUAGE=English')
LEFT JOIN holidays holi ON holi.dt = dara.dts
SELECT
CASE
/* This means that we need to go into the second shift (start2-end2) to calculate the end date */
WHEN work_remaining > end1 - start1
THEN start2 + work_remaining - ( end1 - start1 )
/* This means we can complete the work in the first shift */
WHEN work_remaining < end1 - start1
THEN start1 + work_remaining
END AS finish_time
FROM
SELECT b.*
/* Determine how much work is remaining from the previous days value */
, job_length - prev_work_time AS work_remaining
/* Calculate the smallest delta value to pick the right day of the week
to calculate the end date
, ROW_NUMBER() OVER (partition by B.ID ORDER BY DELTA desc) AS RN
FROM
SELECT a.*
/* This computation is used to determine which day of the week we need to use
to determine the end date of the task
, job_length - effective_work_time AS delta
/* retrieve the previous effective_work_time. This will be used above */
, LAG(effective_work_time) OVER (PARTITION BY ID order by start1) AS prev_work_time
FROM
SELECT job_start_date
, job_length
, id
, day_of_week
, start1
, end1
, start2
, end2
/* Compute the amount of time an employee can work in any given day. Then take a running total of this */
, SUM
CASE
/* When the job_start_date is the same day as the first eligible work day we need to diskount (spam filter misspelled on purpose the
* effective work hours because the job could start in the middle of the day.
WHEN TRUNC(job_start_date) = TRUNC(start1)
THEN
CASE
WHEN job_start_date BETWEEN start1 AND end1
THEN (end1 - job_start_date) + (end2 - start2)
WHEN job_start_date BETWEEN start2 AND end2
THEN (end2 - job_start_date)
WHEN job_start_date < start1
THEN (end2 - start2) + (end1 - start1)
WHEN job_start_date > end2
THEN 0
END
ELSE (end2 - start2) + (end1 - start1)
END
) OVER (PARTITION BY ID order by start1) AS effective_work_time
FROM schedule_as_dates
CROSS JOIN parameters
) a
) b
/* Only interested in delta less than zero because the positive deltas indicate more work needs to be done. */
WHERE delta < 0
WHERE RN = 1I got slightly different results then you. My query got me 1/24/2011 at 13:12. I double checked the math and I think that's right.
Hopefully this works out for you. My apologies for any mistakes.
EDIT
Query is fully posted now. -
I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.
**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone. -
How to debug the function separately which is added in the package
Hi Friends, I want to know how to debug the function separately, by taking it from package,. and i dont no where to add begin and end. and dont no how to give input to the function. ANd how to find the error which is detected from production, so i want to find from which statement its failing. So please guide me to proceed further. thanks in advance.
{ FUNCTION fn_get_trail_id (p_incr PLS_INTEGER DEFAULT 1) RETURN PLS_INTEGER IS
p_trail_id tb_xop_orders_trail.trail_id%TYPE;
BEGIN
IF p_incr >= 1 THEN
SELECT sq_xop_trail_id.NEXTVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
ELSIF p_incr = 0 THEN
SELECT sq_xop_trail_id.CURRVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
END IF;
END;
-- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BEGIN
ppr_openlog('AQ');
ppr_request_lock(v_cb_handle, v_cb_lock);
pr_xop_log_errors('AQ: ==== cb started ('||descr.msg_id||') ====');
my function is like this, how i can i in clude it in declare statement, and how to assign values for that.. and where i have to include "begin".plz help me -
GCF what are the functions of GCF and where can i find that
Hello All,
Can anyone throw some light on what the user expecting..What is GCF what are the functions of GCF and where can i find that
user would like to have the list of customers who have made modification by the GCF (eg modification of the subscription period, the amount, the contract ended ....).
Thanks in advance
Srikanth RavinutalaHello Dinakar,
Please read this before closing your old threads.
Read This Before Closing your Threads
Thanks,
Jignesh Mehta -
Dynamically changing the functions in a menu based on the user (in SSHR)
Dear All,
I have a requirement to change the functions in a menu dynamically.
For Ex: An employee is allowed to apply Advance only in the first one month of his/her joining. I created it as an EIT and attached the function, to the menu. Now, i want to remove it automatically from the menu if his/her term in the company crossed one month.
Can any one tell me how to automatically disable it after one month.
Thanks and Regards
Raj
Edited by: SuperStar_Krishna on Jul 5, 2010 12:22 AMThe following code should do it. In this example, MyCellRenderer is the renderer class implementing TableCellRenderer, used for displaying combo box.
TableCellRenderer renderer= new MyCellRenderer();
(JComboBox)renderer.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e) {
//Your event handling goes here
}); -
Update the functional area (AUFK-FUNC_AREA) directly in the table AUFK
Hello,
The OSS note 150959 gives a report, which directly updates the table field AUFK-PRCTR (profit center). Have you ever tried the same thing with the Functional Area (I am afraid to cause database incoherencies, if I do this) ?
We have to do this both for production and maintenance orders.
Thank's a lot for your answer.
Best regards,
HolgerHello Rajesha,
We have to make a mass update of all production and maintenance orders in our system.
So we have to write a program, which is doing this.
In order to avoid the direct update of the table AUFK, we will write a batch input.
Best regards,
Holger -
The function to combine pdf files and the function to add bookmarks stopped working in 10.x
We had VBA scripts in Access 2003 running with Acrobat 7.0 standard version to combine pdf files and to add bookmarks. The scripts worked fine. Now we installed 10.x and the functions stopped working. Does anyone share the same experience?
In the scripts, we just call the OLE object with the code like:
Set acroOrigPdfDoc = CreateObject("AcroExch.PDDoc")
Set acroNewPdfDoc = CreateObject("AcroExch.PDDoc")
Then we have the call "acroOrigPdfDoc.InsertPages" and "acroOrigPdfDoc.Save" to save the combined pdf files. All these functions work fine under 7.x. Under 10.x, they stopped working without any error messages.
Can anyone help me?Post your problem in the forum for Acrobat SDK.
-
Fit the GUI and its components according to the screen resolution
hi frns,
i have developed a GUI by using BorderLayout and GUI contains around 7 components.I am primarily working on 1024*768 resolution..THe main problem is when i using 800*600..My interface will run out of shape..How to avoid this. ......reply urgently.
thanku.Have you tried this?
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
And then you can do a setSize method to resize your screen based on what you found out about the screenSize.
As long as your components are contained in some sort of layout manager, they should resize accordingly as the screen is resize like this also... You might need to do a yourscreen.pack() also.... -
Hello,
I am working with a pneumatic actuator and this is coupled to a generator. According to the load requirement I want to control the supply of compressed air into the pneumatic actuator.
can someone give somehints to write a control program using labview.haneeshcb wrote:
Hello,
I am working with a pneumatic actuator and this is coupled to a generator. According to the load requirement I want to control the supply of compressed air into the pneumatic actuator.
can someone give somehints to write a control program using labview.
Well....
What are the inputs and outputs you want to acquisition(voltage, current, TTL signals, load sensing...) and control(analog voltages, TTL signals, drivers,ssr,relays, power fets...)
Aquiring a Daq is a start or Arduino Uno to read and control your hardware interfaces to your device
what are the specification requirements and operations...
Have you done a forum search on key words? "pneumatic"....
Being general, opens discussion to nebulous assumptions which members don't have the luxury of time to spend..Though they are willing to help, you must put forth more effort in describing your project, requirements, sensing and controlling, but above all..."what is the problem that you are experiencing?" -
I have a form that consists of columns and rows of fillable fields. When I use the edit function to make the height of the fields the same, or make the widths of the different columns of fields the same, or align the fields vertically or horizontally, duplicate fields are created. If these fields have a box around them, all of the duplicate fields' boxes are shown. The field names have the same base name, but have a suffix that is sequentially numbered. If I delete the "lower" numbered suffix names (with the same base name), the resulting field does not appear on the form.
What is going on with the alignment or size process. I do use the CTRL-Click function to select the group of fields I am trying to size or align. If using the selection of multiple fields should be done differently, how can it be done?No. That's not what's happening. The duplicate fields are ONLY created after I employ the alignment or sizing functions. Weird.
I was hoping that this was the result of some kind of setting in Acrobat, or that the duplicate fields would disappear when saving the form, but that's not what happened.
Thanks for your input, however. -
I recently noticed that a dent was on the side of my iPad that effects the proper functioning of the volume controls. I have AppleCare on my iPad. But will apple keep my iPad to work on it?
Thank you in advance!Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
How to filter the output of a query according to the language
Hi guys,
I have the following tables joined togheter: VBAK ,VBKD ,TVZBT.
The problem is, the output gives any record as many times as many languages exist in table TVZBT
I tried with the following instruction but it doesn't work,no matter in which event I put it:
check tvzbt-spras eq sy-langu.
Thanks,ChristianHello Christian Baldari,
You have to add that check in where clause like :
select ....
from ...
where
<b>tvzbt~spras eq sy-langu</b>.
why because in ur select query you are using innerjoin operation. so you are using TILD (~) operator for alias. you have to check the spras using the alias as mentioned above.
Reward If Hepful.
Regards
Sasidhar Reddy Matli.
Maybe you are looking for
-
HELP!!!
-
Problems with TV Out signal after upgrading to iOS 5.1
Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/
-
Crystal Reports Server - Sub Reports requesting SQL Log In
I have a Sales report which has four subreports. The main report has parameters for year and four product groups. The year parameter and one of the product group parameters are passed to each subreport. When I run the report in Crystal Reports only o
-
Not able to estabish connection with SQLServer2005 from the Topology Manage
I have installed Oracle Data Integrator 10.1.3.4.0 and and Microsoft Sqlserver 2005 Management Studio Express in my windows system and created repository in Oracle Database 11g. I have also downloaded Microsoft SQL Server 2005 JDBC Driver Version 1.0
-
Lost ipad - no mobile me...
Hindsight is 20/20. My kids left my ipad in an airport. I'd like to either wipe it, or locate it, but I don't think I turned on "Find My IPad". And I can't get a mobile me account right now (They are not accepting new accounts til Fall). Any advice?