Change the hour of delivery with the hour system

hello,
can you help me to change the hour of delivery with the hour system in outbound delivery document ( header -> shippement). how can you do this ? with user-exit ? please let me know
thanks a lot

Hi,
You can use MV50AFZ1 to achieve this.
Thanks
Krishna.

Similar Messages

Changing the source system in QA

Hello All,
I just wanted a quick opinion from your experience on the following issue:
We have a ECC Dev client 20 connected to BI Dev client 20
Similarly we have ECC QA 120 connected to BI QA 120
But due to some reason we now want to connect a new ECC QA client 150 to BI QA 120 and take out ECC QA 120 totally(120 is wiped off).
I already have a lot of development transported to BI QA where the source system is ECC 120. Now if 120 dies and we pull the data from 150, what are the pitfalls to watch for?
Like all my Master data objects , DSO and Cubes still point to ECC QA client 120 but now the "actual" source system is going to be ECC QA 150.
Points,
Gaurav

You need to replicate all the data sources in BI from QA 150 and change the source system assignment to 150 instead of 120.
Also, you need to reinitilase delta for delta enabled extractors.
Two things to watch out:
1. If you dont have source system identifier, then if you happen to get records with same key, then it will overwrite. This applies to both master and transaction data.
2. For transaction data that is not delta enables, there may be a possibiltiy with which the records will get duplicated. So, better to delete the old requests before reload the data from QA150.
Ravi Thothadri

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

When to install InDesign it says that I am using an operating systam that InDesign nolonger suppor. It is windows XP What shuld I do as I can not change the operating system?

when to install InDesign it says that I am using an operating systam that InDesign nolonger suppor. It is windows XP What shuld I do as I can not change the operating system?

Please answer the question: Will you need to share files with people who have current versions of InDesign?

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

Change the source system

Hello
In our Quality Box , I need to change the source system connection (from QR1 to QR2). I created the new connection successfully. Now the issue is all the Transfer structure still using OLD connection ( i.e QR1) . I run BDLS and it did not word. How can I re-assign the new source system (QR1) to all of my Transfer structures in one go. Is there any report ?
Farooq

Hello,
You cant directly convert the existing objects for a source system to the new source system.
For that you need to do a transport of the objects to the QA box while maintaining the entry in BDLS to convert to the new source system.
Regards,
Shashank

Broken DCs after changing the runtime systems in track

Hello,
I am making some WebDynpro changes to ESS using NWDI and NWDS. All was working fine until I changed the runtime systems in the track. Eversince I added the test runtime system in the track, I am getting broken DC errors in sap.com_SAP_ESS_1 compartment. When I looked at the details in CBS, it says that Used Component "tc/bi/bp/pcd" not found. I looked at the compartment sap.com_SAP_BUILDT_1 and this DC is not available in that. When I did sync used DCs in NWDS, I am getting the error "ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/pcd. DC not found in DC syncdb." . I performed restore system state and reimported all the required .sca files in to the track. I am still having this problem even after reimport.
Any help is appreciated.
Thanks,
Srihari

Hi Krishna and Snehal,
Thanks for your responses. I have done some more research and found out that the missing DC is available in EP_BUILDT SCA file. I have downloaded sca file for EP_BUILDT from market place and placed it in CMS inbox. I also deployed the .sca file in NWDI system. In CMS, I can not see this .sca file of EP_BUILDT in the check-In tab. I tried to add it as dependency to SAP_ESS SC in Landscape Navigator. But, EP_BUILDT is not available in the list of SWCV when I click on "Define Dependencies". I checked SLD and found out that it is not in the list of SWCV, but is there in "Installed Products" tab of NWDI technical system. Any idea on how to get it as SWCV in SLD or how to get the .sca file in to my "Check-In" tab of track? Please share your thoughts.
Thanks,
Srihari

Not able to change the original system of the object

Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System          Q01   (grey)
Any solution for this ?
thanks

hi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system                                   Target source system
Technical name of R/3 client of test              Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

Change the SYS & SYSTEM Oracle passwords with BRTOOLS, any concerns ?

Hello, I would like to change both the SYS and SYSTEM Oracle passwords with BRTOOLS :
(1) Can I use BRTOOLS to change them, or, I have to change them through SQLPlus ?
(2) Any concerns, will this password change affect my SAP normal operations ?
(3) Do I need to re-start the whole SAP UNIX system when I complete the password changing ?
(4) Or changing these 2 passwords is totally an Oracle RDBMS issue, it will not have any effect on SAP ?

But I failed. I was going to change the password of SYSTEM, but why SAP asked me to enter the password of SAPDEV ?
Why ? OK, then I entered the SAPDEV password (it is the same as SYSTEM's old password).
Then, I called SQLPlus and entered login name : SYSTEM, but why its correct password was still the old one, the new one failed. Why ?
I just wanted to change the password of SYSTEM, why it was related to SAPDEV ?
Here is the screen message :
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
8
BR0280I BRTOOLS time stamp: 2010-01-15 10.22.46
BR0663I Your choice: '8'
BR0280I BRTOOLS time stamp: 2010-01-15 10.22.46
BR0656I Choice menu 2 - please make a selection
Additional BR*Tools functions
1 = Show profiles and logs
2 - Clean up DBA logs and tables
3 - Adapt NEXT extents
4 - Change password of database user
5 - Create/change synonyms for DBA tables
6 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
4
BR0280I BRTOOLS time stamp: 2010-01-15 10.23.14
BR0663I Your choice: '4'
BR0280I BRTOOLS time stamp: 2010-01-15 10.23.14
BR0657I Input menu 59 - please check/enter input values
BRCONNECT options for changing password of database user
1 - BRCONNECT profile (profile) ............... [initDEV.sap]
2 - Database user/password (user) ............. [/]
3 ~ Database owner to change password (owner) . []
4 - Message language (language) ............... [E]
5 - BRCONNECT command line (command) .......... [-p initDEV.sap -l E -f chpass]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
2
BR0280I BRTOOLS time stamp: 2010-01-15 10.28.56
BR0663I Your choice: '2'
BR0280I BRTOOLS time stamp: 2010-01-15 10.28.56
BR0681I Enter string value for "user" [/]:
SYSTEM
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.08
BR0683I New value for "user": 'SYSTEM'
BR0263I Enter password for database user 'SYSTEM' (maximum 8 characters):
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.32
BR0657I Input menu 59 - please check/enter input values
BRCONNECT options for changing password of database user
1 - BRCONNECT profile (profile) ............... [initDEV.sap]
2 - Database user/password (user) ............. [SYSTEM/*******]
3 ~ Database owner to change password (owner) . []
4 - Message language (language) ............... [E]
5 - BRCONNECT command line (command) .......... [-p initDEV.sap -l E -f chpass]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.41
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRCONNECT will be started with options '-p initDEV.sap -l E -f chpass'
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.41
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.49
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 6.40 (39)
BR0280I BRCONNECT time stamp: 2010-01-15 10.29.52
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.34.58
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.35.57
BR0482W The passwords entered must be identical
BR0280I BRCONNECT time stamp: 2010-01-15 10.35.57
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
c
BR0280I BRCONNECT time stamp: 2010-01-15 10.36.31
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRCONNECT time stamp: 2010-01-15 10.36.31
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.37.03
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.08
BR0482W The passwords entered must be identical
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.08
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.11
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
c
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.14
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.14
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.16
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.18
BR0829I Password changed successfully in database for user SAPDEV
BR0830I Password changed successfully in table OPS$DEVADM.SAPUSER for user SAPDEV
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.18
BR0803I BRCONNECT completed successfully with warnings
BR0292I Execution of BRCONNECT finished with return code 1
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.18
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.44
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.44
BR0656I Choice menu 2 - please make a selection
Additional BR*Tools functions
1 = Show profiles and logs
2 - Clean up DBA logs and tables
3 - Adapt NEXT extents
4 + Change password of database user
5 - Create/change synonyms for DBA tables
6 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

How Can I change the default system editor to use it on Eclipse?

Hi, I want to know something. In Eclipse, when I do the following with a file: Open With -> System Editor, GVIM is opened, and I would want to change this behaviour to another editor.
How Can I perform this?
Greetings

Davigetto wrote:
It doesn't work to eclipse... I don't know why, always gvim is opened... If I uninstall gvim, eclipse give me an error telling to me that was impossible to open the system editor.
The variables mentioned above initially were empty (without content).
Any more ideas?
Greetings
I'm pretty sure those ENV variables are only used for terminal / console operations, not GUI functionality. I think the confusing issue here, perhaps, was that Eclipse calls the option 'system editor.'
What it is referring to, instead, is the application set in your file manager for opening a particular file type. For me, it opens Scite, as I have Scite set in Nautilus to open most 'text' types. However, I can change the behavior to open Komodo Edit for *.py files by simply right clicking on any *.py file, selecting 'Properties' and setting the appropriate editor in the 'Open with' tab. Now *.py files open in Komodo in any circumstance, including selecting 'Open wirh > system editor' in Eclipse.
The procedure will be slightly different depending on your DE / file manager.
Last edited by MrWeatherbee (2007-12-01 10:26:56)

Change the user/system status when PP order is packed through COPP1

Hi All,
We have a requirement to set the system or user status for a PP order. The flow is the transaction COPP1 is used to pack the order for different dates. Now there is a button available on the toolbar when the second screen comes and it shows the data for different dates.
Is there any user exit or badi available to change the user or system status when tcode COPP1 is used. We want to change the status when the order is packed through tcode COPP1.
Has anyone of you come across such kind of requirement before if yes then guide me how to solve this problem. If there is other way out also let me know.
Thanks,
Mark

Hello,
I am not aware about COPP1 transaction and fuctionality but production order change (automatic) is possible from Status profile settings. Create a status profile with your desired statuses and assign this to ordey type.
Regards
TAJUDDIN

How to change the original system of a CR?

Dear gurus,
we have imported some workbench and customizing CRs into a system B mannually from system A,
there is no transport link between A and B.
But when we want to import those CRs into system C , which has transportation link with B, we can not found those CRs, i guess because those CRs is release on A ,not B.
Could you please help me how to import those CRs into system C, just like other 'normal' CRs?
do i need to modify the original system of the CRs? if so , could you pls tell me how to do that?
thanks and best regards.
Jun

Hi Nicole,
there are many system objects inside our CR, DDIC, FM ...
so we can not change them one by one.
what we are trying to do is to port a custom solution from one system to another,there is no link between them , and in the target system, those CRs can be transport to other systems normally using STMS.
we are trying to include those crs into a new cr in the target system , but failed.
could you please provide more informaiton on how to solve this?
thanks and best regards.
jun

Change the hour of delivery with the hour system

Similar Messages

Maybe you are looking for