Change the Industry Sector
Hello,everybody!
After the material master data have been created,can we make a change of the Industry Sector ? If do, how to realize it?
Thanks in advance !
HI,Stephen and Yogesh:
Thanks for your replies!
The reason I want to change the industry sector is that:
We filled the industry sectors of all materials with different labels (e.g., A and B).
Now we want unify them to the same label.
It seems this change is impossible according to your information.
Thanks!
Similar Messages
-
How to change the Industry sector of a material
Hi,
We made a Material Number with wrong Industry sector. How can i change it to right Industry sector.
Industry sector should be Electrical inplace of Chemical Industry.
Plz guide..Please check these links out for details:
Re: change industry sector
Re: change the Industry Sector
Change industry sector
Edited by: Afshad Irani on Apr 24, 2010 12:50 PM -
Re: Change to industry sector
Dear All,
Because of mistake we have created the material with different industry sector, would you pls help to change below wrong setting for PN97724085 of Industry sector from Chemical industry to Mechanical Engineering?
Thanks & Regards
SivaHi,
Its not possible to change the Industry Sector.
Check on it for material deletion.
Re: Material marked for deletion
pherasath -
Ignificance of the Industry Sector selection in the Material Master
hi all,
We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record. We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
Any inputs would be greatly appreciated.Hi
Please check follwoing links
[MM01- Industry Sector;
[http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
Which screens appear and in which order
Which industry-specific fields appear on each screen
The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
Regards
Kailas ugale -
How to find the industry sector of a material?
Dear all,
Is it possible to find the industry sector of an existing material?
Thanks, JeromeDear Jerome Zhao,
<b>Using Table MARA in T code SE16</b>, give the input as the material for which
you want to <b>find out the Industry sector type for the field MBRSH</b>.
If its a small notation For example M - Mechanical Engg,check the expantion for
this alphabet using <b>T Code OMT3E.</b>
Reward points if useful.
Regards
Mangal -
Restiction of material types based on the industry sector?
I have developed specific industry sector for my client and also developed specific material types (Z*) for them.
But then i cannot prevent my user from creating the material master with the incorrect industry sector and also they are able to create material types choosing the incorrect material type?
Can somebody please advise how to restric this.
Thanks
RegardsIn the MM01 trxn ..
Enter Industry sector & Material Type.
then Click > Defaults > Industry Sector > Put tick to Industry sector ..
So, that the Z* Industry sector will become Default..
As user will not see Industry sector , there is no Question of changing..
Pls do it for All Users.. -
Hi
can any one tell me
how to cnange industry Sector for one Material.
From Chemical to Mechanical Industry.
it is very urgent
regards
Manju orHi,
you cannot change the industry sector of material once created. i tried even to change by using t-code MASS nut there i didnt find field MBRSH-industry sector which is there in the table MARA.
i think you have to create material again with your industry sector.
if other alternative is thr let me knw.(gurus).
Regards,
Archit -
Change the Material type & Material industries
Hi Expert,
I have created one material code. Suppose that Material Code is " XYZ"
Material code : "XYZ"
Material Type : FERT
Industry sector: Chemical industries
I want to Change material type & Industry sector.
Please help me how i change the Material type & Industry sector.
Best Regards
Shashi SinghHi
I want to Change material type & Industry sector.
Changing the material type for a material is possible as it has been well explained by other friends
It is because a semifinished goods one material type can become a finished goods another material type
Changing the industry sector is not possible at all
Once industry sector is assigned to a material you cant change it at all
Regards
Raja -
How to modify industry sector of material master data
dear all:
i have already created a material master data using a wrong industry sector through tcode MM01.
and i have created BOM&ROUTTING for this material.
now ,i want to modify the industry sector of this material.
what should i do for this case?
thank you!
best regards!Hi,
Industry sector is at client level & once you create the material you can't change the industry sector.
However, if you have debug rights then you can change it directly in the table MARA with field MBRSH.
Hope your query get resolved.
Thanx -
Hi all,
While creating material code using MM01 i have wrongly put industry sector as OILl.Now i need to change the industry sector. specify which Trasancation Code to be used.
or specify some procedure.Hi
Industry Sectors
Use
When you create a material master record, you are required to classify the material according to
industry sector and material type.
Like material types, industry sectors have control functions in the R/3 System. For example, it is
a factor determining the screen sequence and field selection [Page 97] in a material master
record. Once you have assigned an industry sector to a material, you cannot change the industry
sector again afterwards.CChheemmiiccaall iinndduussttrryy
MMeecchhaanniiccaall eennggiinneeeerriinngg
Features
The standard R/3 System contains the following industry sectors. The ID used to identify the
industry sector internally appears in parentheses.
Plant engineering and construction (A)
Chemical industry (C)
Mechanical engineering (M)
Pharmaceuticals (P)
The other sectors are for retail.
Activities
Your system administrator can define other industry sectors in Customizing for the Material
Master in Define Industry Sectors and Industry-Sector-Specific Field Selection [Ext.].
This is MM tutorial notes
Industru sector cannot be changed in std SAP
Raja -
Industry sector of the Material
Hi there!
Do we have any way out to find out the 'Industry Sector' for the material (irrespective of any material type) which is already created and available in the system.
Ex: Material - XYZ - Is created in the system a year back.
I want to know the which industry sector does it belong to?
Is there any way out? If Yes, What are the ways to find out this.
Regards,
SureshDear,
Use MARA table.
Enter SE16 t-code.
Here enter table MARA and press enter.
Then enter your material codes and click on execute.
You will get material wise industry list
Regards,
Mahesh Wagh -
Determine Industry Sector / Transaction Key Maintainance
Hello Gurus,
I have been doing these 2 settings for Purchasing and Inventory Controlling. But never understood the real impact and reason. Could anyone throw some light on the same in detail.
thanks in advance.Hi dear,
if you check all the std update rules for the involved flows....you will find that every row (more or less) takes into account (in if-clauses and so on...) these objects !
A lot of LC datasources have only generic key figures (transfer quantities and transfer values) that have a significance only if combined with the process (transaction)keys!
The industry sector change is a prerequisite to have filled these fields !
Hope it helps!
BYe,
ROberto -
Hi,
There is a need to hide the not required industry sectors in MM01 drop down
Is there any way we can hide that.
Thanks
DiwakarHii,
You can set the default industry sector in any of the material master screen i.e creation and change mode (mm02).
Go to T-Code: MM02
Go to menu Defaults
Select the Industry Sector
It will ask for the default industry sector assign
Check Box the Hide Industry sector on initial screen
When ever u create the material code the default Industry sector will be the assigned one in the default values.
Regards,
Kumar -
Hi,
During creating material master we are giving , industry sector.. is it controls anything?? what will be impacts???Hi
The industry sector is used to activate / deactivate certain screens / fields specific for that particular industry. You can create your own industry sector or use one which satisfies your needs.
We can define industry sector in SPRO
Path
Spro >Logistics - General>Material Master--> Field Selection --> Define Industry Sectors and Industry-Sector-Specific Field Selection
Standard Settings
The standard SAP R/3 System comes, for example, with the following
industry sectors:
o A for plant engineering and construction
o C for the chemical industry
o M for mechanical engineering
o P for pharmaceuticals
You can change the name of the industry sector (plant engineering and
construction, and so on) and, if necessary, the field input control too
(via the field reference).
regards, -
Relationship between material type and industry sector
Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards
Maybe you are looking for
-
Replace text in photoshop document & save
Hello, I have to make apprieciation certificates for a committee. Is there a way to use Automator to replace text within a photoshop document (people's names) and then save each name in a different file? Thanks!
-
why am i unable to save photos on mu 4ios since i downloaded the recent update?
-
How to use the type 4 of DBF JDBC 2.0 Driver?
Hi, I download the "DBF JDBC 2.0 Driver package" from http://memebers.tripod.com/~ZYH/jdbc.html and copy it into my classpath. But I cannot find its Driver name string using in Class.forName(<DriverName>). And I also need the Connection String in Con
-
What privileges do I need to grant to a user so that they can view the reports queue when using SSO? http://host:port/reports/rwservlet/showjobs
-
Hi , When Iam trying to run a ASO cube which has 22 dimension thru .msh which will refresh the outline and then loads the data i.e full load. Iam facing this below error WARNING - 1053010 - Object [cust] is already locked by user [abc]. I tried by un