Change the info. in control record?

hi...
how 2 change the information in control record?Not in ALE?
bye.

you can use the various options in the IDoc adapter and change the info in the control record.
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm
The options like;
1. Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values.
Take Sender from Payload
If you want to take the sender of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
Take Receiver from Payload
If you want to take the receiver of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
To know more abt the control records, ref: http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm

Similar Messages

How to change the size of control´s prompt?

No matter the size of data to be displayed in the view suface prompt, the controls have the same size.
Does anyone here know how to change the size of control in surface prompt?

HI,
In order to change the size of a radio button... one way you may consider is to Customise the Radio Button.
Place a Radio Button (RB) on the FP of a VI, Right-Click the RB > Advanced > Customise...
Click the Mode Button (most Left button) for Edit Mode
Right-click the radio button (the round image) now, you will see a list of actions i.e. Copy to clipboard, import picture ...You will see Four images under the 'Picture Item', those are the images that you will need to replace.
Prepare Four Images of the similar but larger expected size
*** Copy the 1st new image to clipboard. Back to the Picture Item and select 1st image. Then, select Import Picture (to replace the existing image)
Repeat *** for all four images.
Once done, change the mode back to original. Save the *.ctl
You are now ready to use the customised radio button!
Quick sample attached (sorry for the poor images created )
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_RButton_Large.ctl ‏11 KB

ITunes denies me the ability to change the info of my media. Anyone have the same problem?

Whenever you desire to change the information on a certain music file or movie you've saved to your apple device (In my case, an iPhone 4S), the only things that pop up on screen are the "Play (Insert name of media here)" or below that: "Get info". And even if you do click on "Get Info", you can only LOOK at the info already there and you can't change it! Before this problem arose, there used to be a long list of options you could select from for that specific media file you chose. Things like ratings, copy, delete, consolidate files, get artwork, etc. were at my fingertips, and now iTunes has refused me these luxeries! The thing I miss the most is being able to click on the "Get Info" option and actually CHANGING THE INFO of the media file instead of just looking at it with the color of the font being gray and not allowing you to change it! If I wanted to rename a video I got from the internet or give proper credit to the person who uploaded said video, I could do so in the past, but not now! Also, I cannot drag a music track or video file from my Video files of my computer's hard drive and place them into my Movies of iTunes or my iPhone 4S! It used to be so quick and easy to click and drag what you wanted into your device, But now it's just such a pain! I ask if anyone has this same problem and better yet, if anyone has a solution to this? All considerate thoughts and actions are appreciated. Thank you.

When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..

I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..

I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account. On my ipad it logs into my original email account and I see no where to log into another email account. If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to. It did not send to back up email account either.
Can I log into 2 email accounts on my ipad where it says mail at bottom?
Can I have 2 apple ids?
If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
(won't let me)
If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

How do you change the info in auto fill?

How do you change the info in auto fill

Check your Address Book entry, and check Safari->Preferences->Autofill

Changing the EVB3 speed control

How do I change the rotary speed control number on the EVB3 to accept controller change #82, which is what my Nord Electro is sending? I'm using the Electro as a MIDI controller for Mainstage, and I've got all three pedal jacks plugged in, but i don't want the sustain pedal to change speeds. What am I missing?
Thanks,
Stewart

Duh...it's in the manual. Just change the Midi Mode in the EVB3 controls to NE (I think that might be short for Nord Electro)

?? How do I change the info i put in during set up?

I will be selling my macbook to someone--how do i change the info i put in during set up (such as address, name, phone number, etc.)?? I feel a lot safer to sell the macbook without those info in the computer.

Yes, you are doing the right step.
Insert the installer disk, and it will asked you to
restart, and it will restart from the disk.
After you choose the language, it will comes up with
installer screen, but don't choose install yet, go to
finder menu bar and select utilities > disk utilities
and erase and choose more option and check zero all
data.
After you done that (it will took hours to do so,..be
patience), then you can start to re-install the OS.
Good Luck.
you lost me after erase...where do i find more option and zero all data

Change the Frame content Control style

Hi,
Is any way to change the style of current Frame content control as dynamically...?
I am using Frame control and navigating to Test.xaml, Test.xaml contains some windows Label control with styles, So Need change the Test.xaml label color dynamically, while it's in Frame, How..Please help me...?.
Frame.Navigate(typeof(Test));
After navigating in to Frame, I need change the Test.xaml control styles how..?

Try this:
1) Create some public static Brushes inside Test.xaml.cs
2) In the setters for these brushes, assign the value to the Labels
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Why cant i change the info of a song

I have three different albums for the same album. I been trying to change it but itunes wont let me change the info of the artist. Does anybody know why?

I have had this happen as well. What I had to do was sync the iPod to remove the album and the resync the album back to the Classic. I've had this happen with my iPhones as well. Must be a bug in either the current OS or iTunes versions.

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

How to change the "TabIndex" of Controls?

Hello,
there are serval string/number input controls on a front panel, and I want to change the tab indics of them, because some users prefer to use "Tab"-Key than using mouse by inputing and the order of these control is really not logical. But I could not find any settings as "TabIndex", is there any way to do it?
Thanks a lot!
Le
Solved!
Go to Solution.

Hi,
Go to Edit>>Set Tabbing Order
Also if you want to skip a control right click the control and go Properties>>Key Navigation and select the skip when tabbing option
David

How do I change the info (artist,album,etc) on an MP3 file?

I am editing some mp3 files in GarageBand and I need to put in a different artist and album name. When I export the file from GarageBand and open it in iTunes it says that the artist is me and that it is my album. Any help on how I change it? I need to change the files properties and not just the name in iTunes because I need to upload it to the internet and so the artist name needs to be downloaded with it. I am running OS X Yosemite version 10.10.1, iTunes version is 12.0.1.26, GarageBand version 6.0.5 (428.5).
Thanks

Change the preferences in GarageBand in the "My Info" settings before you create the project: The "before" is important, because a bug in earlier GarageBAnd versions causes GarageBand to ignore the changes settings, if the project has been created with different "My Info" settings.
You can also enter different settings, when you bounce the song to iTunes using the Share menu:

Hoy can I change the info in Apple id already created to not include a crédito card

How can I modify an Apple tu use it without a credit card

If you want to remove your credit card then on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then you could try tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and selecting 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

Change the info. in control record?

Similar Messages

Maybe you are looking for