Change the InfoObject in production

Hi All,
I have an infoobject of length 5 type Char. I want to increase the length of the same. Now the problem is I have ODS in which this infoobject is used, already in production. Can i Change length of this infoobject??
or do I have to delete the data in ODS for change to take place??
Please reply at the earliest.
Regards
Rahul

Hi Siggy,
Just to confirm, I will follow these steps:
1. Make changes to InfoObject in Development. There is some test data in Development, which will be required to be deleted. So that changes in infoobject can be activated.
2. Then I will transport this infoobject to Production where data is already present in infoproviders related to it.
I wanted to confirm this as we can not activate infoobject when data is present in infoproviders related to it.
Please confirm this.
Regards,
Rahul

Similar Messages

  • Changing the Assignment of production order in sales order in MTO scenario.

    Hello all!
    I have following problem:
    After the MRP a production order was created for a sales order. Because of the production in another plant
    the production order which was created automatically had to be technically completed and a new one
    created.
    If you want to check now the availability, the sales order finds nothing, because it's linked to the one,
    which was technically completed. Now is the question how can I change the production order for this
    sales order. (In the production order the correct sales order is connected!)
    As I found out it's connected to the field AUFNR in the table VBEP. But how can I change this
    field within a transaction and not in the database?!?

    No replies

  • Change the infoobjects from Key fields to Data fields in ODS.

    Hi ,
    I want to change the few infoobjects from Keyfields to Datafields in ODS.
    When i drag the infoobjects in ODS edit screen , then i am getting  small pop up..states that "cannot move/delete the Lock objects".
    Plz reply me
    Prasanna

    Hi Prasanna
    Delte the existing data in ODS before doing modifications..
    Regards
    R M K
    Assining points is the only way of saying thanx in SDN ***

  • How do I change the language of products in ITunes Store?

    I speak English living in the Italian part of Switzerland but when I set the country to Switzerland I just get loads of products in German (like audio-books).
    Does anyone know how to change the language to English, (not the language of itunes itself just the store).
    Thanks

    From reading other posts here I believe the Music Store selectability are controlled by the country in which you reside, and probably the language reflects whatever is established for that country. Still, given the multi-language nature of Switzerland it strikes me as odd that you aren't seeing at least a French, Italian and possibly even Romansch versions (I don't subscribe to iTunes so I can't see any versions).

  • Can I change the image, name & product description on the iTunes page?

    Hi there,
    I recently started a new podcast, Jazz Now! Seattle. When I first entered it I used a logo that has now been change. I have also reworked the title. And the description on the iTunes page has a "/" in it that shouldn't be there. You can see it all here:
    http://itunes.apple.com/us/podcast/jazz-now-seattle/id389101248
    Can I change these things?
    Thanks!
    Jason

    As you are using WordPress you will need to change things there: if you were to edit the feed itself it would simply be overwritten the next time you added something. If you change the title and remove the slash in the appropriate places in Wordpress and republish then iTunes will pick up the changes - possibly it may not do so until you add a new audio episode.
    As to the image, simply point Wordpress to the new image (with a different name, don't just create a new image with the same name) and again this will update, though it will probably take some days.

  • Changing the Query in Production

    HI
    My requirement is to make a small change in a query which is available in production with out changing in Quality .When i am trying to change i got the error message like Error :System is not set to changeable - Objects are not changeable.How to change a single  report with out accessing tcode se06 and scc4 .Please advise.
    Regarsd
    Arun

    Hi there,
    No it isn't with a not changeable system. The only option is the one I've mentioned, which is make the query elements changeable even if you have a not changeable system, but this will be for all the queries and not a single one.
    Diogo.

  • Function Module /BAPI for changing the components in Production order

    Hi,
    We are in ECC5.0. We have requirement wherein we want to change /delete the existing component of the production order and add new component through RFC call from an external system. We tried to use CO_XT_COMPONENT_ADD FM for adding new components and when we tested this FM in SM37  with data there were no error messages . When we checked the Production order ,no changes were made to the production order component. Tried to use Commit statement and there is no change in the system behavior.Can some one help me to  understand the system behavior . If possible kindly suggest me some alternate FM/BAPI .
    With regards,
    Joseph Anand B

    Dear,
    Please check this link,
    ADD COMPONENTS TO PRODUCTION ORDER
    Regards,
    R.Brahmankar

  • How to change the worklist in schedule manager in production system

    we are using schedule manager (SCMA) to arrange the daily process in SAP system. but we have to config the worklist and transport it to the production system every time cause in production system if we press edit worklist there would be a message called " TK430 The system administrator has set your logon client to the 'not modifiable' status.Client-specific objects can not be changed in this client."
    Is there any way that I can directly change the worklist in production system?
    Thanks.
    Jiajia

    Hi SUN,
    Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
    and
    http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
    ps Stop the OMS first.
    Eric

  • Support message and change requests only for production system

    Hi guys,
    I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
    In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
    In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
    Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
    Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
    Kind regards
    Rayko

    Hi Rayko,
    We do not have this option.
    Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
    I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
    Best Regards,
    Fernando

  • Error while changing the Display Attribute into Navigational Attribute

    Hi all.. Gud Mrng.
    I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
    Error Message: u201CThe Info object is being used in several data targetsu201D
    My Questions:
    i)     Do I need to delete the data from all the data targets (where this info object is using)??
    ii)     Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
    Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
    Thanks in advance.
    Thanks & Regards,
    B Venugopal

    Hi Garima
    Only in case of key figures we cannot change it from display to navigational.
    If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
    I am sure you know that these settings only mean if a IOBJ can be used as display or navigational.  To  use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
    Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
    Cheers
    Umesh

  • Changing the datasource of LO cockpit inR/3..need a backup plan

    Hi gurus,
    i am going to change the datasource in production system i have done everything in Dev and QAs but my client is asking for a backup plan if something goes wrong.
    like if the transport fails he want everthing to normal without effecting the setup of deltas and data in BW
    can somebody suggest me what i can do as a backup plan if something goes wrong.
    thanks and regards
    neelu

    Hi Neel
    If something goes wrong and it mess up your deltas in Production system then what is the backup plan?
    This is what I think -
    If your data source is LO cockpit extractor then ensure following -
    Before your R/3 transports ,stop V3 batch job .
    Lock the users (transaction lock) ,
    Stop batch jobs that will update base tables of extracor
    Drain the delta queue into BW till you get 0 LUWs in RSA7 for that datasource in R/3 system.
    Activate the last request in ODS and also send the data into Infocube . Now you have all data till that time into BW.
    Import your transports. Then execute V3 job in R/3 and run Info package from BW .
    If something is messed up then immdiately push another transport that will repair it .Then  do Init without data transfer and resume deltas.
    For other extractors just ensure to Drain the delta queue into BW till you get 0 LUWs in RSA7 for that datasource in R/3 system.(I assume that you will take care of batch jobs /transactional update - they should be stopped for any extractor)
    Hope this plan helps you .
    Please let me know if you still have questions.
    Best of luck
    Pradip

  • BPC_ADMIN changes ENTITY infoobject but inactivates transformation

    In PRD, I suddenly found that my process chain was failing because the transformation for my infoobject has been deactivated because BPC_ADMIN changed the infoobject.  I don't want to transport the activation again from Dev since the infooject has changed in PRD directly.  Is there a way to activate the transformation through a program?
    Regards,
    Mel Calucin
    Bentley Systems

    DSO Structure:
    Characteristics
         BPC Exchange Rate Period                 /BIC/ZPERIOD   ZPERIOD     /BIC/OIZPERIOD   CHAR          20
    Key Figures
         Exchange Rate for BPC                    /BIC/ZXCHGRATE ZXCHGRATE   /BIC/OIZXCHGRATE DEC           11
         Ratio for the "from" currency units      /BIC/ZFFACT    ZFFACT      /BIC/OIZFFACT    DEC            9
         Ratio for the "to" currency units        /BIC/ZTFACT    ZTFACT      /BIC/OIZTFACT    DEC            9
    Units
         Currency Key for Transaction Currency    CURKEY_TC      0CURKEY_TC  /BI0/OICURKEY_TC CUKY           5
         From currency                            /BIC/ZFCURR    ZFCURR      /BIC/OIZFCURR    CUKY           5
    Other Fields
         BW Delta Process: Update Mode            RECORDMODE     0RECORDMODE RODMUPDMOD       CHAR           1
    Transformation File:
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = ,
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT=
    ROUNDAMOUNT=
    *MAPPING
    C_Category=*NEWCOL(C_100)
    INPUTCURRENCY=0CURKEY_TC
    R_ENTITY=*NEWCOL(GLOBAL)
    R_ACCT=0RATE_TYPE
    TIME=ZPERIOD
    SIGNEDDATA=ZXCHGRATE
    *CONVERSION
    INPUTCURRENCY=INR.XLS

  • Change to InfoObject

    Hi,
    I have an InfoObject which is being used in multiple InfoProviders. I have to make a change to conversion. How sould I do it?
    Thanks
    NewBW

    When you change the InfoObject, its new version is automatically available in the InfoProviders in which it is utilized. 
    Not sure if you are asking something different.  If so, please clarify in a repost.
    Regards -
    Ron Silberstein
    SAP

  • How to change infoobject descriptions in a query after change the infoobjec

    Hi all,
    Imagine that you have 200 queries in production and need to change some descriptions in 2 infoobjects. eg:
    Infooject 1 = "Customer Sales View"
    Changed to    "Cust.View of New MKT"
    Infooject 2 = "Material for sales"
    Changed to    "Material"
    Is there any way to change all queries automatically ? Via Report or Function or Transaction ?
    Suggestions ?
    Best Regards,
    Mauro.

    Hello Madhukar,
    We recently had upgraded to NW2004s and in few queries even when I login with different language for instance Portugese the infoobject descriptions still show up in english and are not changed.
    Can you please let me know if I need to update the RSZELTXT table along with other tables. If so can you please forward me the ABAP Code in order to do the same.
    Your help would be really appreciated if you can reply promptly as our UAT is pending on this issue.
    Let me know.
    Thanks
    Dharma.

  • Not able to change the data of test data containers in production system

    Dear All,
    We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System.  Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data. 
    May be the reason is SCC4 transaction code has set the below option.
    Changes and transports for client-specific Objects
    u2022 No changes allowed
    Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
    Could you please let me know the solution for this?
    Your help is really appreciated.
    Thanks,
    Mahendra

    eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
    Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
    Let me know if you need more information
    thanks
    Venkat

Maybe you are looking for