Change the layout of a query items in BEx analyzer

Hi,
I had developed a query, so when it is viewed in BEx analyzer the items(Char and Keyfigures) that i had used in rows and columns are displayed in analyzer.
Apart from this in report i can see the items i had used,
in top corner.
So i need to change the layout of these items in top corner ie. 1. all charac
2. all keyfigures
or combination of both in priority wise, is it possible.
Pl post.

Hi,
You can delete them from Query output and Save it as workBook.Then Open the workbook.You will not see them again whenever you open your workbook.
Right click on result area of output>properties>interaction tab-->enable 'Refresh Query when opening workbook' and save the work book so that whenever workbook is opened,you will get selection screen.
Pl dont forget to reward points if it helps.

Similar Messages

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

'ANALYZE_ACT_FIELDCAT' error coming while changing the layout in FBL1N

Hi Friends,
Through Enhancement we added some piece of code which just adds all lines from the BSEG Table of the given document number. Means FBL1N only displays vendor line items, after adding the above code now it could be able to display all the GL line items also.
The Change is perfectly working in development system. But in Production system when i am changing the layout 'ANALYZE_ACT_FIELDCAT' error is displaying.
Please suggest the Solution.
Thank You in Advance.
Mahender.

Hi Friends,
Through Enhancement we added some piece of code which just adds all lines from the BSEG Table of the given document number. Means FBL1N only displays vendor line items, after adding the above code now it could be able to display all the GL line items also.
The Change is perfectly working in development system. But in Production system when i am changing the layout 'ANALYZE_ACT_FIELDCAT' error is displaying.
Please suggest the Solution.
Thank You in Advance.
Mahender.

How to change the layout of a category view

I don't know how to change the layout of a category. I want to put 3 image's behind each other followed by some text, like a table with 4 columns. Instead of puting then in 4 rows

larsprevo
The category 'view' of items/folders uses the default style of the content area it is defined in (shared categories use the default shared style). Edit the default style to change the font/color of the items/folders returned within the category 'view'. Unfortunately, you don't have the ability to control the layout(like folder regions) - they always display in rows.
Added an enhancement request for a feature that would allow you to control the display of items/folders in a category/perspective: 1828423

Why did you have to change the layout of Firefox?

I would like to know why you have gone and changed the layout of Firefox?
I am still on Fx 3.6.18 because quite frankly 5.0.1 looks horrible.
Why did you have to change everything and move things around. Why couldn't you have given us the same layout as 3.6.18 but with these new upgrades.
I will never download Fx5. 3.6 was perfect.
Also how can I contact Fx without upgrading?

Sorry the old Feedback page - Hendrix - used with older versions of Firefox was disabled near the end of 2010.
In Firefox 4+ versions there's a Help > Submit Feedback... menu item which leads here: http://input.mozilla.com/en-US/feedback <br />
But you can't submit feedback there with an older version of Firefox, currently you need Firefox 5.0 or higher.
The decision to change the GUI was made by Mozilla collectively, not by a small group of developers or by one person. If you put your efforts toward customizing Firefox to suit your tastes, it would be a lot more productive than trying to find out who to blame and where to complain about the changes made to Firefox. Geez dude, it ain't the end of the world. It's only a web browser, which can be easily modified to make it look like you thing it should look.

Dynamically changing the layout of thre report-urgent please

Can we change the layout of the report dynamically during runtime for example:the user should have flexibility to change the width, size , position of columns before the report is displayed & also he choose some fields not to display as per his discretion.
Mahesh

There are several ways of doing this, it really depends on your requirements as to which is suitable. (There are probably other ways of doing this as well).
- Try Reports XML Customizations
This is available in 6i and allows you to create a report dynamically on the fly. The template used will also allow you to change the paper size as well. The main limitation is that you are relying only on Reports defaulting to create the layout for you. The advantage is that you can store all your information to create the report in meta-data which can be driven by another tool.
- Use lexical parameters for queries and format triggers
Here, you have a fixed layout but dynamically change the query columns to the correct order. You would normally standardise on a "character" column type in order to do this. Even though the layout is fixed, you can use variable sized fields to push objects around. This can be difficult to setup.
- Use several layouts
You're reducing the options for the user, but you can have several layouts in the same report and turn them on/off. Effectively creating differing views of the same data.

FPo1p changing the layout

hi,
Good day guys
hope every one is doing well. I got a requirement which is changing the layout for FPO10 T.code. it creates the two spools one is for total and second one is for line items.. before going to create the spool i need to change the layout. below prg are tringgering while debuging..
First one :-> SAPLFKKAKTIV2
Second :-> Programs:SAPLFKKOP03
Fqevents: 1795
While debuing its not going to point where the spool creating as i mentioned above prog or event. Please let me how to change the layout for FPO1p.
Regards
KK

Hi Soni,
Thanks a lot for your reply. At the moment we are not using NWDI, but using only the standard iviews provided by SAP. So, I have the only option of making some changes in the portal.
Apart from that, regarding changing the properties of the particular iView in the portal, I have changed property of "Who's Who" iView in the Content Admin and tried it. But it doesn't show the user details in a new winidow.
Let me be more clear about my requirement:-
"When we enter a name and search for a user in the "Who's Who" iView and the system returns the relevant matches to the search criteria. Later, when I click on a particular user among the search results I want the User details to be displayed in a separate window."
Please advise me about this. I would appreciate your help.
Kind Regards,
Gopal.

How to change the layout of the ALV screen

Hi,
I need to have a parameter in the selection screen. If I change the layout name on the selection-screen, the layout of the ALV needs to be changed.
Thanks,
srinivas.

Pass the layout (and report name) to the ALV. parameter IS_VARIANT of function module [REUSE_ALV_GRID_DISPLAY|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=reuse_alv_grid_display&adv=false&sortby=cm_rnd_rankvalue] or method [SET_TABLE_FOR_FIRST_DISPLAY|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=set_table_for_first_display&adv=false&sortby=cm_rnd_rankvalue]
You may also use the following function modules in your selection screen :
- [REUSE_ALV_VARIANT_F4|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=reuse_alv_variant_f4&adv=false&sortby=cm_rnd_rankvalue] to select the layout/variant name. (in AT SELECTION-SCREEN ON VALUE-REQUEST FOR <variant>.)
- [REUSE_ALV_VARIANT_EXISTENCE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=reuse_alv_variant_existence&adv=false&sortby=cm_rnd_rankvalue] to check existence of the layout/variant name. (in AT SELECTION-SCREEN ON <variant>)
- [REUSE_ALV_VARIANT_DEFAULT_GET|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=reuse_alv_variant_default_get&adv=false&sortby=cm_rnd_rankvalue] to get the default variant (to fill <variant> in the INITIALIZATION)
Regards

ABAP Dump while Changing the Layout fields in Report output - RCOPCA02

Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
                line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca,                         "Einzelposten / Ist
        glu1,                          "Übergabestruktur FI-SL-Anzeige
        t000,
        tka01,
        sscrfields,
        vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
      end of i_glpca.
data: rw_subrc   like sy-subrc,      "Flag: Report-Writer-Schnittstelle
      re_subrc   like sy-subrc,        "Flag: Recherche-Schnittstelle
      subrc      like sy-subrc.
data: set_id    like sethier-setid,    "Set-ID        "RDI_SETS_4.0
      set_class like sethier-setclass, "Setklasse     "RDI_SETS_4.0
      set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
      s_message(1),
      auth_dbcount like sy-tabix,
    Hex-Konstanten für Minimum/Maximum-Werte
      begin of hex00,
        x1(12) type c,
        x2(12) type c,
      end of hex00,
      begin of hexff,
        x1(12) type c,
        x2(12) type c,
      end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr    for glpca-rldnr   default '8A' no-display,
rassc    for glpca-rassc                no-display,
rrcty    for glpca-rrcty   default 0,
rrcty    for glpca-rrcty,
rvers    for glpca-rvers   default '000',
kokrs    for glpca-kokrs   memory id cac,
bukrs    for glpca-rbukrs memory id buk,
poper    for glpca-poper   default sy-datlo+4(2),
ryear    for glpca-ryear   default sy-datlo,
poper    for glpca-poper,
ryear    for glpca-ryear,
prctr    for glpca-rprctr matchcode object prct,
pprctr   for glpca-sprctr matchcode object prct,
RACCT    FOR GLPCA-RACCT   MATCHCODE OBJECT KART,      "RD_P30K128304
racct    for glpca-racct,            "RD_P30K128304
drcrk    for glpca-drcrk,
activ    for glpca-activ,
rhoart   for glpca-rhoart,
rfarea   for glpca-rfarea,
stagr    for glpca-stagr,
rtcur    for glpca-rtcur,
runit    for glpca-runit,
versa    for glpca-versa no-display,
eprctr   for glpca-eprctr no-display,
afabe    for glpca-afabe no-display,
rmvct    for glpca-rmvct no-display,
hrkft    for glpca-hrkft no-display, "note 550972
sbukrs   for glpca-sbukrs no-display, "note 550972
shoart   for glpca-shoart no-display, "note 550972
sfarea   for glpca-sfarea no-display, "note 550972
docct    for glpca-docct,
docnr    for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks    for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope   for glpca-rscope.
parameters: no_rrint no-display default ' '." skip       "MICP40K066037
" report-report-interface
display variant                                       ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
        v_prctr for glpca-rprctr,
        v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer           *
data begin of val_tab occurs 50.
        include structure rgciv.
data end of val_tab.
       MICP30K166368
feldkatalog und interface für bb-schnittstelle rw        MICP30K166368
       MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
        include structure rstifields. "MICP30K166368
data end of bbs_fieldtab.             "MICP30K166368
archiv
type-pools: rsds.
types:      begin of ty_archive_objects,
               object       like arch_obj-object,
            end   of ty_archive_objects,
            ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set          type c           value 'X',
            lc_report       type progname    value 'KE5Z',
            lc_reporttype   type reporttype value 'TR'.
tables:     admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db       type c            default 'X' no-display,
            read_ar       type c                        no-display,
            arc_obj       like arch_obj-object          no-display,
            read_as       type c            default 'X' no-display.
data :     lt_arch_obj     type ty_t_archive_objects with header line,
            ls_selections   type rsds_frange,
            lt_selections   type rsds_frange_t,
            ls_selopt type rsdsselopt,
            lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low    = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if     kokrs-low is initial       "get contr. area from company code
     and not bukrs-low is initial.
    call function 'KOKRS_GET_FROM_BUKRS'
      exporting
        i_bukrs        = bukrs-low
      importing
        e_kokrs        = kokrs-low
      exceptions
        no_kokrs_found = 1
        others         = 2.
    if sy-subrc <> 0.
      clear kokrs-low.
    endif.
endif.
if not kokrs-low is initial.
    call function 'K_KOKRS_READ'       "get fiscal year variant
         exporting
              kokrs           = kokrs-low
          importing
              e_tka01         = tka01
        exceptions
              not_found       = 1
              not_found_gjahr = 2
              others          = 3.
    if sy-subrc = 0.
      call function 'G_PERIOD_GET'
        exporting
          date                           = sy-datlo
          variant                        = tka01-lmona
        importing
          period                         = poper-low
          year                           = ryear-low
        exceptions
          ledger_not_assigned_to_company = 1
          period_not_defined             = 2
          variant_not_defined            = 3
          others                         = 4.
      if sy-subrc = 0.
        poper-sign = 'I'.
        poper-option = 'EQ'.
        append poper.
        ryear-sign = 'I'.
        ryear-option = 'EQ'.
        append ryear.
      endif.
    endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
    exporting
      i_save     = g_save
    changing
      cs_variant = gx_variant
    exceptions
      not_found = 2.
if sy-subrc = 0.
    p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
    p_vari = '1SAP'.
    move p_vari to gx_variant-variant.
    call function 'REUSE_ALV_VARIANT_EXISTENCE'
      exporting
        i_save     = g_save
      changing
        cs_variant = gx_variant
      exceptions
        not_found = 1.
    if sy-subrc ne 0.
      clear p_vari.
      clear gx_variant-variant.
    endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
    exporting
      i_report     = lc_report
      i_reporttype = lc_reporttype
    importing
      e_xusedb     = read_db
      e_xusear     = read_ar
      e_archobj    = arc_obj
      e_infosys    = read_as
    tables
      t_arch_sel   = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
    exporting
      p_status = 'SELSCREEN'
      p_program = 'RCOPCA02'
    tables
      p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen                   *
data: ld_no_rrint type boole_d.      "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
    free memory id 'RCOPCA02_NO_RRI'.
else.                                "note 490484 end
    call function 'G_REPORT_INTERFACE_INIT'   "Report-Writer?
        exporting                      "MICP30K166368
             table = 'GLPCT'           "MICP30K166368
         importing
             subrc = rw_subrc          "MICP30K166368
        tables                         "MICP30K166368
             it_fieldr = bbs_fieldtab. "MICP30K166368
    call function 'RSTI_APPL_STACK_POP'"oder Recherche?
         importing
              i_rec                      = a_rec
         exceptions
              appl_stack_not_initialized = 1.
    re_subrc = sy-subrc.
    if re_subrc = 0.
   check Receiver is this report
      if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
               or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
        re_subrc = 2.
      endif.
    endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low.          "RD "4.6a
                                                            "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST'                       "RD "4.6a
     importing                                              "RD "4.6a
          e_racct      = racct-low.                         "RD "4.6a
                                                            "RD "4.6a
                                                            "RD "4.6a
*at selection-screen on value-request for racct-high.         "RD "4.6a
                                                            "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST'                       "RD "4.6a
     importing                                              "RD "4.6a
          e_racct      = racct-high.                        "RD "4.6a
at selection-screen on value-request for p_vari.         "MICP40K039857
perform f4_for_variant.              "MICP40K039857
at selection-screen on value-request for poper-low.         "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
    exporting
      kokrs           = kokrs-low
    exceptions
      not_found       = 1
      not_found_gjahr = 2
      others          = 3.
if sy-subrc = 0.
end of insertion note 522715
    call function 'ECPCA_RPMAX_VALUE_REQUEST'               "RD "4.6a
         exporting                                          "RD "4.6a
              i_kokrs     = kokrs-low                       "RD "4.6a
              i_ryear     = ryear-low                       "RD "4.6a
         importing                                          "RD "4.6a
              e_rpmax     = poper-low                       "RD "4.6a
begin of insertion note 522715
         exceptions
              table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high.        "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
    exporting
      kokrs           = kokrs-low
    exceptions
      not_found       = 1
      not_found_gjahr = 2
      others          = 3.
if sy-subrc = 0.
end of insertion note 522715
    call function 'ECPCA_RPMAX_VALUE_REQUEST'               "RD "4.6a
         exporting                                          "RD "4.6a
              i_kokrs     = kokrs-low                       "RD "4.6a
              i_ryear     = ryear-low                       "RD "4.6a
         importing                                          "RD "4.6a
              e_rpmax     = poper-high                      "RD "4.6a
begin of insertion note 522715
         exceptions
              table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
    call function 'K_KOKRS_READ'
      exporting
        kokrs           = kokrs-low
      exceptions
        not_found       = 1
        not_found_gjahr = 2
        others          = 3.
    if sy-subrc <> 0.
      message e101(ki) with kokrs-low.
    endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
    or sy-ucomm = 'ONLI' and read_ar = 'X'
    and read_as is initial and lr_files[] is initial.
    if lt_arch_obj[] is initial.
      lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
      lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
    endif.
    call function 'KARL_DATA_INPUT_SELECT'
      exporting
        i_db_and_arc       = lc_set
        i_infosys_possible = lc_set
        i_object_fixed     = 'V'
        i_documentation    = 'KARL_DATA_INPUT_SEL_KE5YZ'
        i_report           = lc_report
        i_reporttype       = lc_reporttype
      tables
        t_objects          = lt_arch_obj
        t_arch_sel         = lr_files
      changing
        c_xusedb           = read_db
        c_xusear           = read_ar
        c_archobj          = arc_obj
        c_infosys          = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial.        "note 490484
    if rw_subrc eq 0 or re_subrc eq 0.
      refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
               racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
               versa, afabe, eprctr,
               v_racct, v_prctr, v_pprctr.
      clear:   rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
               racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
               versa, afabe, eprctr,
               v_racct, v_prctr, v_pprctr.
    endif.
Parameter einlesen über Report-Writer-Schnittstelle                 *
    if rw_subrc eq 0.
      perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle                *
    elseif re_subrc eq 0.
      perform re_get_parameters.
    endif.
endif.
if read_db = 'X'.                     " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
    call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
        text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
    call function 'DB_DO_NOT_USE_CLIENT_INDEX'
      exporting
        value    = sy-mandt
      tables
        mandttab = rclnt.
    select (tab_fields) from glpca
       client specified
       package size packsize
      APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
        into corresponding fields of table i_glpca
       where rldnr     in rldnr
         and rrcty     in rrcty
         and rvers     in rvers
         and kokrs     in kokrs
         and rbukrs    in bukrs
         and ryear     in ryear
         and rassc     in rassc
         and hrkft     in hrkft   "note 550972
         and sbukrs    in sbukrs "note 550972
         and shoart    in shoart "note 550972
         and sfarea    in sfarea "note 550972
         and racct     in racct
         and rprctr    in prctr
         and sprctr    in pprctr
         and poper     in poper
         and drcrk     in drcrk
         and activ     in activ
         and rhoart    in rhoart
         and rfarea    in rfarea
         and versa     in versa
         and eprctr    in eprctr
         and afabe     in afabe
         and rmvct     in rmvct
         and docct     in docct
         and docnr     in docnr
         and stagr     in stagr
         and rtcur     in rtcur
         and runit     in runit
         and refdocct in refdocct
         and refdocnr in refdocnr
         and werks     in werks
         and rep_matnr in repmatnr       "RDIP40K020663
         and rscope    in rscope         "RDIP40K020663
      and rclnt     in rclnt.       "dirty trick to mislead DB-optimizer
      if sy-dbcnt > 1.
        text1 = sy-dbcnt.
        condense text1.
        concatenate text1 text-m01 into text2 separated by space.
        call function 'SAPGUI_PROGRESS_INDICATOR'
          exporting
            text = text2.          " ... Datensätze gelesen
      endif.
    endselect.
Entfernt nicht zugehörige Einträge....................................
    loop at i_glpca where ( not rprctr in v_prctr )
                       or ( not sprctr in v_pprctr )
                       or ( not racct in v_racct ).
      delete i_glpca.
    endloop.
endif.
*archiv
if read_ar = 'X' and not
    ( read_as is initial and lr_files[] is initial ).
    call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
        text = 'Lesen im Archiv'(p12).
    define fill_lt_selections.
      if not &2[] is initial.
        clear ls_selections.
        move &1 to ls_selections-fieldname.
        loop at &2.
          clear ls_selopt.
          move-corresponding &2 to ls_selopt.
          append ls_selopt to ls_selections-selopt_t.
        endloop.
        append ls_selections to lt_selections.
      endif.
    end-of-definition.
    fill_lt_selections 'RLDNR' rldnr.
    fill_lt_selections 'RRCTY' rrcty.
    fill_lt_selections 'RVERS' rvers.
    fill_lt_selections 'KOKRS' kokrs.
    fill_lt_selections 'RBUKRS' bukrs.
    fill_lt_selections 'POPER' poper.
    fill_lt_selections 'RYEAR' ryear.
    fill_lt_selections 'RPRCTR' prctr.
    fill_lt_selections 'SPRCTR' pprctr.
    fill_lt_selections 'RACCT' racct.
    fill_lt_selections 'DRCRK' drcrk.
    fill_lt_selections 'ACTIV' activ.
    fill_lt_selections 'RHOART' rhoart.
    fill_lt_selections 'RFAREA' rfarea.    "note 401961
    fill_lt_selections 'STAGR' stagr.
    fill_lt_selections 'RTCUR' rtcur.
    fill_lt_selections 'RUNIT' runit.
    fill_lt_selections 'VERSA' versa.
    fill_lt_selections 'EPRCTR' eprctr.
    fill_lt_selections 'AFABE' afabe.
    fill_lt_selections 'RMVCT' rmvct.
    fill_lt_selections 'DOCCT' docct.
    fill_lt_selections 'DOCNR' docnr.
    fill_lt_selections 'REFDOCCT' refdocct.
    fill_lt_selections 'REFDOCNR' refdocnr.
    fill_lt_selections 'WERKS' werks.
    fill_lt_selections 'REP_MATNR' repmatnr.
    fill_lt_selections 'RSCOPE' rscope.
    fill_lt_selections 'HRKFT' hrkft.   "note 550972
    fill_lt_selections 'SBUKRS' sbukrs. "note 550972
    fill_lt_selections 'SHOART' shoart. "note 550972
    fill_lt_selections 'SFAREA' sfarea. "note 550972
    call function 'EC_PCA_SELECT_FROM_ARCHIVE'
      exporting
        i_selections            = lt_selections[]
        i_files_sequential_read = lr_files[]
      importing
        e_glpca                 = lt_glpca_archiv[]
      exceptions
        no_infostruc_found      = 1.
    if sy-subrc = 1.
      message id sy-msgid type 'I' number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    clear i_glpca.
    loop at lt_glpca_archiv assigning to i_glpca.
      append i_glpca.
    endloop.
endif.
if i_glpca[] is initial.         "Info,nichts gefunden
    message s000.
    exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
   sort i_glpca by rldnr ryear rbukrs rrcty rvers
                   docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
                  refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
    perform check_repo_authority changing authorised.
    if authorised is initial.
      delete i_glpca.
      s_message = 'X'.
    zählen der Sätze ohne Berechtigung
      auth_dbcount = auth_dbcount + 1.
    else. "Weitere Bearbeitung nur für berechtigte Belege...
    Zusätzlich merken der Anzahl der Ausprägungen
    bestimmter Dimensionen
      on change of -rbukrs
            ct       = '10'
          importing
            currency = hsl_curr.
      endon.
    externe Immobilienbezeichnung                     "ww/kb
    on change of i_glpca-imkey.
      if ( not -dabrz
                I_length   = 20
             importing
                  e_empge    = -konty.
        endif.
      CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
      endif.
    endon.
    on change of i_glpca-dabrz.
       call function 'REMD_IMKEY_TO_EMPGE'
            exporting
                 i_imkey    = i_glpca-imkey
                 i_dabrz    = i_glpca-dabrz
                i_length   = 20
            importing
                 e_empge    = i_glpca-empge
                 e_konty    = i_glpca-konty.
      CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
     endon.
    Konvertierungsproblem mit PSP-Nummer bereinigen
      if not -psppp.
        endif.
      endif.
    Währungen in Hilfsfeldern speichern
      if -ksl_curr = ksl_curr.
      endif.
    modify i_glpca.
    endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
    message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup         = 'X'.
t_layout-f2code               = 'PIC1'.                "MICP40K039857
t_layout-get_selinfos         = 'X'.
t_layout-group_change_edit    = 'X'.                   "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill.                 "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
      exporting
           i_callback_program       = 'RCOPCA02'
           i_callback_user_command = 'USR_CMD'
           i_callback_top_of_page   = 'TOP_OF_PAGE'
          I_CALLBACK_END_OF_PAGE   =
          I_CALLBACK_END_OF_LIST   =
           i_callback_pf_status_set = 'SET_PF_STATUS'
          I_CALLBACK_LAYOUT_SAVE   =
          I_CALLBACK_FIELDCAT_SAVE =
           i_tabname                = 'I_GLPCA'
           is_layout                = t_layout
           it_fieldcat              = t_fieldcat
          I_FCTYPE                 = 'R'
          IT_EXCLUDING             =
           it_special_groups        = t_spec_groups
          IT_SORT                  =
          IS_SEL_HIDE              =
          I_SCREEN_START_COLUMN    = 0
          I_SCREEN_START_LINE      = 0
          I_SCREEN_END_COLUMN      = 0
          I_SCREEN_END_LINE        = 0
      tables
           t_outtab                 = i_glpca
      exceptions
           others                   = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
     exporting
        I_INTERFACE_CHECK        = ' '
           i_callback_program       = 'ZRCOPCA02'
           i_callback_pf_status_set = 'SET_PF_STATUS'
           i_callback_user_command = 'USR_CMD'
           i_structure_name         = 'I_GLPCA'
           is_layout                = t_layout
           it_fieldcat              = t_fieldcat
        IT_EXCLUDING             =
           it_special_groups        = t_spec_groups
        IT_SORT                  =
        IT_FILTER                =
        IS_SEL_HIDE              =
           i_default                = 'X'
           i_save                   = g_save
           is_variant               = g_variant
           it_events                = t_events
        IT_EVENT_EXIT            =
        IS_PRINT                 =
        I_SCREEN_START_COLUMN    = 0
        I_SCREEN_START_LINE      = 0
        I_SCREEN_END_COLUMN      = 0
        I_SCREEN_END_LINE        = 0
   IMPORTING
        E_EXIT_CAUSED_BY_CALLER =
        ES_EXIT_CAUSED_BY_USER   =
      tables
           t_outtab                 = i_glpca
    exceptions
         program_error            = 1
         others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*&      Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA                                    *
--> p1        text
<-- p2        text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth.          "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
    exporting
      i_kokrs             = -racct
      i_vorgn             = 'REPP'
      i_actvt             = '28'
      i_auth              = auth
      i_no_dialog_message = 'X'
    exceptions
      no_authority        = 1
      data_missing        = 2
      others              = 3.
if sy-subrc = 0.                                          "ok
check ledger/version/record type
    call function 'PCA_G_GLTP_AUTH_CHECK'
      exporting
        rldnr            = -rrcty
      exceptions
        no_authorisation = 1
        others           = 2.
    if sy-subrc = 0.                   "ok, User is authorized
      authorized = 'X'.
    endif.
endif.
endform.                               " CHECK_REPO_AUTHORITY
*&      Form INIT_VARS
      Initialisieren diverser Hilfsvariablen und -tabellen           *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
          include structure dntab.
data end of nametab.
select single * from t000
                  client specified
                  where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
    exporting
      only    = 'T'
      tabname = 'RPCA2'
    tables
      nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
                    and fieldname ne 'HSL_CURR'
                    and fieldname ne 'EMPGE'               "ww/kb
                    and fieldname ne 'KONTY'.              "ww/kb
    move nametab-fieldname to tab_fields-name.
    append tab_fields.
endloop.
fill Fields of receiver for BBS                          "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
    exporting
      e_repid   = 'RCOPCA02'
      e_type    = 'R'
    tables
      it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'RPRCTR'.
    modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'SPRCTR'.
    modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'RBUKRS'.
    modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform.                               " INIT_VARS
      FORM FILL_LISTHEADER                                          *
      List-Header in Abhängigkeit der selektierten Daten            *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
    exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger              '(h01).
if cnt_rldnr <= 1.
    t_listheader-info = i_glpca-rldnr.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
    t_listheader-info = i_glpca-kokrs.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis       '(h03).
if cnt_bukrs <= 1.
    t_listheader-info = i_glpca-rbukrs.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode     '(h04).
if cnt_poper <= 1.
    t_listheader-info = i_glpca-poper.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
    t_listheader-typ = 'S'.
    t_listheader-key = 'Geschäftsjahr       '(h05).
    t_listheader-info = i_glpca-ryear.
    append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version             '(h06).
if cnt_rvers <= 1.
    t_listheader-info = i_glpca-rvers.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
endform.                    "fill_listheader
*&      Form FIELDCAT_FILL
*&      Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY,           *
*&      bzw REUSE_ALV_LIST_DISPLAY,                                    *
*&      weitere Infos enthält die FktBaustein-Doku                     *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RLDNR'.
afield-no_sum      = 'X'.
afield-no_out      = 'X'.
afield-key         = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RRCTY'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RVERS'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'POPER'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RYEAR'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel     = 'X'.
afield-no_sum      = 'X'.
afield-sp_group    = '2'.
afield-seltext_s   = 'Typ'(t01).
afield-seltext_m   = 'Belegtyp'(t02).
afield-seltext_l   = 'Ref.Belegtyp'(t03).
afield-outputlen   = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
   afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel     = 'X'.
afield-no_sum      = 'X'.
afield-sp_group    = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
   afield-no_out = 'X'.
endif.
append

Hi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
       Occurred on     12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
                                                         What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
                                                     Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
                                                         Source code extract
008880         gs_roid-row_id = rs_row-index * -1.
008890       endif.
008900       gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910       gs_poid-row_id = gs_roid-row_id.
008920       gs_poid-sub_row_id = gs_roid-sub_row_id.
008930       gs_poid-rowtype    = rs_row-rowtype.
008940       gs_poid-index      = rs_row-index.
008950       insert gs_poid into table rt_poid.
008960     endif.
008970     append gs_roid to rt_roid.
008980
008990     loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000                                                       no_out ne 'X'.
009010
009020       if gflg_invisible = 'X'.
009030         if <ls_fieldcat>-do_sum is initial.
009040           clear gflg_invisible.
009050           continue.
009060         else.
009070           clear g_col_counter.
009080           clear gflg_invisible.
009090         endif.
009100       endif.
009110
009120       clear gs_lvc_data.
009130       clear g_style.
009140
009150       assign component
009160              <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170       if sy-subrc ne 0.
     >         message x000(0k).
009190       endif.
009200
009210       g_col_counter = g_col_counter + 1.
009220
009230       gs_lvc_data-row_pos = r_row_counter.
009240       gs_lvc_data-col_pos = g_col_counter.
009250       gs_lvc_data-row_id = gs_roid-row_id.
009260       gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280   *   Endtotal and average
009290       if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300   *     save the actual grouplevel information
009310         gs_grouplevels = rs_grouplevels.
009320         clear g_lines.
009330
009340   *     get number of lines of the collect table
009350         describe table rt_data lines g_lines.
009360   *     if there is only one line or the field has no references so
009370   *     that only the first line has to be considered
Thanks,
fractal
null

The environment has changed; the layout can no longer be executed

Hi guys,
I`m getting the below mentioned error message when I attempted to "Enter Plan Data" on my Layout
" The environment has changed; the layout can no longer be executed "
All I did was to create a Variable in Planning Area and then made adjustments to my Data Column in my Planning Function to include the Variable.
Please advice soonest possible

Hi Anurag,
I have a question of Variable.
I created a variable CURRMTH on Characteristic Fiscal Year/Period in my PLANNING AREA.
This variable CURRMTH has the following properties
Text Replacement : Medium text
Replacement Type : Fixed Value
Selection : Fiscal Year/Period is set to 001.2005
Now, I created a Layout
Fiscal Year Period in Data Column and Key Figure in Lead Column.
In my Layout: Data Column tab , I put the following
Heading : CURRMTH
Key Figure : NEWLISTKF
Variable
Fiscal Year/Period: CURRMTH
Do you forsee any inconsistencies here ?
One more question, do I also have to set my Planning Level / Package to have characteristic Fiscal Year/Period to Variable ?
Please help, mate!

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to change the url of "Add New Item" of a particular list in SharePoint 2013???

Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony Joy

Hi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

How to change the subtransaction of a transferred item in Invoicing?

Hello guys!
I have the following question and I hope you could be able to answer.
In Invoicing, we select all the open payment we received from a customer and we include them in the Account maintenance line of the Print document. In some cases the amount of the payments is higher than the amount of the consumption and this leads to a transfer posting of the amount of the overpayment.
For example:
received payments
================
100,00EUR
100,00EUR
100,00EUR
consumption for the billign period
==========================
150,00EUR
The transfer document will contain the following items/subitems:
====================================================
item      subitem         amount          clearing status      main transaction        subtransaction
0001           000      50,00EUR                                        0250                          0010
0001           001      50,00EUR                      9                0250                          0010
0001           000     100,00EUR                                        0250                          0010
My question is - is there an event which can be used to change the subtransaction for a subitem?
I checked and tested event R418 but it can be used to change the subtransaction only for an item.
Thanks a lot in advance!
Kind regards,
Mariya

Hi ,
First of all the Event R418 as you have mentioned have the structures FKKKO and FKKOP .
In FKKKO you will not get the sub item and in FKKOP you will get the sub itmes .
Before the process gets in to Event R418 it has only 1 line item and hence you are facing the problem .
If you have multiple line items getting in to the FM then you can build the logic based on the Import date that is passed in structure FKKOP .
Else try for the function module FKK_OPEN_ITEM_SPLIT , in R418 where in you can split the document if you are having only 1 entry in FKKOP.
Kindly check and revert back with your findings .
Regards ,
Dewang

How do I change the order of context menu items in Private Windows?

In the context menu that appears when I right-click on a link, I prefer to have "Open Link in New Window" at the top of the menu instead of "Open Link in New Tab". I have added code to userChrome.css to make that switch:
#context-openlink {
-moz-box-ordinal-group: 1 !important;
#contentAreaContextMenu > * {
-moz-box-ordinal-group: 2;
Firefox version 20 added Private Browsing Windows. The above code still works for the non-Private windows, but doesn't affect the Private Windows, so in those I still have "Open Link in New Tab" at the top of the context menu, and "Open Link in New Private Window" as the second item. Is there a way to change the order of these menu items in Private Windows?

Clarification: In the code snippets above, the "1."s are supposed to be pound-signs; they got auto-reformatted incorrectly.

Change the layout of a query items in BEx analyzer

Similar Messages

Maybe you are looking for