Change the look after creating own composed look.

I have recently been introduced to Sharepoint 2013, i have used the sharepoint palette download to change set colours in an .spcolor file. I have uploaded these and all worked fine however I now dont seem to be able to change the look it just hangs and when
clicking Try this out i get an error message.
I am using Oslo if that makes difference.
I even tried just altered the .spcolor file and replaced it in the Themes folder 15. When I go to change the look the current theme shows the updates in the small preview thumbnail however the page does not.
Does anyone know if this error is becasue ive uploaded my own .spcolor?

I shouldn' think so.  I've not looked at the Palette creator tool for a few months but I'd assume that all it outputs is a file containing hex references matching your choices.
Does your deployment do this in site collection that doesn't have your custom palette?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Similar Messages

  • Change material status after creating SO

    Hi Guru,
    i have created a sales order with material 'DCC001'.
    after creating the sales order the STATUS of material 'DCC001' should be 'Sales not allowed'.
    but, when i am checking the status of that material, its showing blank in field 'X-distr.chain status' which is in tab 'Sales: sales org. 1'.
    Please tell me how can i change the status after creating SO.
    Thanks & Regards
    Sohel

    Please post in correct forum..

  • HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    See https://discussions.apple.com/message/19218571#19218571.

  • Do not change the payment term created a Sales Order with reference

    Hi Gurus,
    Do not change the payment term created a Sales Order with reference to a contract where the payer of the change in Sales Order.

    Hello ,
    As per my understanding , you do not want the payment terms to be changed even if the payer partner function is changed ,
    as standard sap redetermines the payment terms with change in partner function, you may use the exit
    USEREXIT_MOVE_FIELD_TO_VBAK- header level
    USEREXIT_MOVE_FIELD_TO_VBAP- Item level
    in this you could write a small code which will not change the payment terms when payer is redetermined
    hope this helps
    Thanks
    akasha

  • SBO2007A can no longer change the Price after Discount on marketing docs

    In SBO2005A (subjecting to Document Settings), you could change the Price after Discount.  Thisis no longer available in SBO2007A (unless you upgrade from SBO2005A with the appropiate settings.
    I have not found a customer who thinks this is good idea.
    Good to reinstate the functionality.
    Regards
    Jeff

    Hi,
    The field "Price after discount" can become editable if you unmark the checkbox "Calculate the row Total using the Unit Price" (Document Settings->General Tab). As default this checkbox is disabled for new installations.
    Also, please check the following link as well :
    Re: Net price calculation
    Regards,
    Jitin
    SAP Business One Forum Team

  • How can I change the country after a massage saying that check the security code

    How can I change the country after a massage saying that check the security code

    Massage?
    Why not ask the masseuse who gave you the massage?

  • I am not able to change the object after upgrade(SPAU Activity).

    HI All,
    I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
    Procedure
    Comsult your system administrator.
    Thanks in Advance,
    Mahesh Devershetty

    Hi,
    Does the user who would like to change the screen have the authorisation
    for S_DEVELOP in his profile? Please run transaction /NSU53 after the
    failed authorisation. You will get an information which authorisation
    is missing.
    Additional please check if you have open entries in transaction SPAU for
    that object.
    If you couldn´t solve the issue I need an user to analyse it in your
    development system.
    That user needs all authorisation for development and has to be
    registrated as developer.
    The system uses the authorization object S_DEVELOP for Workbench objects
    can you please check your user master record whether it contains the
    required autorization or not.
    Please also ensure that modification adjustment is turned on as per note:
    197600  Switching the Modification Assistant off and on
    Aidan

  • Changing the format  after camcorder import

    I've capturing a couple of hours worth of video, I'm now at the stage of starting to edit, but the format is saying that it's DV PAL, when I shot all the video in DV PAL widescreen. I expected it to detect this.
    Is there any way to change the format after capture to widescreen or HDV 720p or HDV 1080i ?
    Thanks
    MacBook Black / iMac   Mac OS X (10.4.8)  

    In the Library module, Grid view, select all the images that have the wrong metadata preset, then in the Metadata pane (right-hand panel) click in the Preset box (see highlighted box in the screenshot) and you'll get a drop-down list of available metadata presets. Simply select the correct one and you'll get a confirmation box pop-up....click on the appropriate option (All Selected) and you are done.

  • Its possible to change the qualtity after pgi?

    i wants to change the quantity after did the PGI/
    customer reqiurement plz give the ans
    magha

    hai sap gurus
    this is my customer senario . in that sd process max sale order 1 & max delivery two , but customer required multible billing documents
    EXMPLE:
    sale order : 10 pcs ( only one material)
    delivery allowed ; 2(two)
    billing doc ; 10 billing doc( for each pieces) so system shold give 10 billing doc from two delivry
    plz help me to solve the issue
    with advance thanks
    magha

  • How to change appraiser / reviewer after creating the appraisal template

    Hi All,
    Once the Appraisal template created, if we have changes in appraiser / reviewer, how we can change the new names in the appraisal template in standard (other than T.Code: Phap_admin --> Change header data).
    For eg., we have created a document for PERNR 1 on Apr 1st for 01.04.2014 to 31.03.2015 with appraiser as Mr. XYZ, on 01.05.2014 Mr. XYZ left and Mr. PQR replaced that position. In this case, how we can replace appraiser name for PERNR 1 as Mr. PQR in the appraisal template.
    Please suggest.
    Regards,
    Venkat Nagam

    Koushik,
    Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
    If you still want to give it a go:
    Assuming that you created the 2-page Master Detail report & form:
    On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
    On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
    Thanks,
    - Scott -

  • How can we change the structure after a Journal has been created??

    Hi Experts,
                    We have made an application and create a journal for it using the journal wizard.
    But later on on the development, we need to change or modify the structure of the application.
    so when we try to do it, the system prompt that we cant change the structure because it has journals.
    so we use the clear journal function and try it again. It still give the same prompt.
                    How can we deal with this problem?? we really need to change the structure.
    Thanks,
    Bennie Jay

    Hi Shova V.
                  I tried it and it worked!!! thanks!!  although it doesn't work for the first time when i try to modify. if have to process it first for  it to work.
                  I just hope in the next version it shouldn't be manually done.
    Thanks,
    Benniejay

  • How to change the scenegraph after a certain time

    I want to have an object appear in one of my 3d-applets after 30 seconds. How do I do this? It would be easy in regular Java, but since the scenegraph is precompiled, it makes it more complicated in Java3D.
    Have a look at some of my shapeshifters:
    http://www.astralvisuals.com/ShapeShiftersnew.htm

    Actually, it wouldn't be that difficult at all.
    Here's the trick: The scene graph as a whole isn't necessarily precompiled. You actually compile the BranchGroups in the scene. And branch groups can be added or removed at ANY time (provided the right capabilities are set).
    You can add it later in several ways:
    You could override behavior to count out 30 seconds (w/ or w/o using an Alpha), and add the item.
    Or you could do it from your application, using a TimerTask, or implementing your own thread to do it.
    Another idea, instead of actually adding the item 30 seconds in:
    You could add the item right away and set the appearance invisible, and set it visible when 30 seconds is up.
    Another thing you could do is modify the culling at 30 seconds in, so the 'visible' faces aren't rendered until 30 seconds have passed.
    The bottom line is, you can always change the scene graph after it's been compiled and is live AS LONG AS you have set the appropriate capabilitiy bits.

  • My Dows iMac does not Boot up into the OS nor into the DVD after creating..

    Hi All,
    I ended up in strange situation where iMac doesn't even Boot, neither from the HD nor from the DVD, I ended up with this problem after creating a Bootcamp partition on my iMac.
    I tried all the possible troubleshooting methods given in the Apple trouble shooting guide. but no use.
    the current state of my iMAC is when start it it simple displays the blank white screen and doesn't progress any further.
    and when I reboot the machine and hold the C button, it displays a faint folder icon in the center.
    please help me , if any one has encountered the same problem.
    Thanks in advance.
    Regards,
    Narik

    If you start up with the Option key, as far as I remember, there is no mouse icon. You may need to use the arrow keys to select a bootable disk.
    OK, holding down the mouse button is the accepted (and correct) way to eject a disk at startup.
    Try putting in the disk before startup. Then hold down the C key when you press the power button. It can take a time to read an install disk. However, if it is not reading the disk there may be more problems.
    Have you tried a safe boot: Use the Shift key at start.
    Serious Stuff:
    I know you are new to Macs, but as an alternative, try to startup and hold down the Command + S keys. This should put you into single user mode and it will all look like a black screen with white writing. When it stops you should see a $ sign -- this is the command line. As a first step, just type in the single word - reboot - and press the return key.
    If that works we can try something else.
    It may be, of course, that while creating your Boot Camp partition, you erased everything. Great care needs to be taken with these functions. That would not, however, prevent the disk from booting.

  • Change the Layout for Create Change Display and   Alv List

    Hi All,
    I am working on Custom Development  WD Application for Maintain   Employee.
    I need to Get help/advice to hadle the two Problems.
    1) In my application I have to provide Create,Change & display Employee.
    Customer needs seperate Link/Application for all Create , Change and Display in Portal.
    I thought I am planning to Create Three Application in the WD Component(Create,Change & Display) while Pressing the Application I have to find out what is the Application They Pressed in the Componenet Controller to Change the Layout/Field (Edit/Display/Visisble) according to Create/Change/Display Employee.
    For this How to Find the Application name of the WD Componenet.
    2) To show the Employee List I am having using ALV LIst.
    But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
    I thought I am planning to provide Visible/Invisble columns after providing one button.
    If they pressed this button It will next set of Columns with out scrollibng.
    How to handle this ?
    Kindly help/advise  me for both the Problems to proceed further.
    Thanks in advance.
    Dav

    1.For this How to Find the Application name of the WD Componenet.
    DATA:
      l_api                           type ref to if_wd_component,
      l_application_api               type ref to if_wd_application,
      l_application_info              type ref to if_wd_rr_application,
    lv_name                            type string.
      l_api              = wd_this->wd_get_api( ).
      l_application_api  = l_api->get_application( ).
      l_application_info = l_application_api->get_application_info( ).
      lv_name = l_application_info->get_name( ).
    > 2) To show the Employee List I am having using ALV LIst.
    >
    >  But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
    Are they planning to buy Wide Screen monitor ??
    I am not really fan of the solution you propose, at the same time i am not having better idea. I would get the customer on table and see how they would like to have the presentation of 35 columns without scrolling.
    ALV provides customization, in that way users can select their own list of columns.

  • How can I change the font when creating an e-mail in Outlook's web-mail mode?

    I am new to Firefox. When I go to a web-mail server, I can click on sending a new message. While there, I cannot find any way to change the font, font size, or color of the text. All of these options were available in a toolbar at the top of the message window when I am using Internet Explorer 9 or IE8. I have looked through all of the help files provided by Firefox, and found nothing about changing fonts, etc.
    Thanks for trying to help

    Hi Jaime,
    Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both  objpack-obj_langu = '3' & doc_chng-obj_langu  = '3' instead of '3' please replace it with 'J'.
    Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
    Regards,
    Gokul

Maybe you are looking for