Change the look of a disabled component

Can anyone clue me in on how to change the look of a component like a jScrollPane when it is disabled? I need to change the foreground/background so it will be easier for people to read. I've looked around for an answer since i'm sure it's simple enough but have come up dry.
Thanks
Chris

Similar Messages

How can I change the look of URL Icons?

I have created several web site URL shortcuts and put them in my Dock (actually I just drug the web site URL's to my Dock, Apple crated the ability for me to do so). I have a iMac desktop, with OS X Mavericks 10.9.1.
My question is: Is there any way to change the look of the icons for the URLs that I have in my dock? (so far I have 5). They all look the same, an @ sign on top of a pedestal with a spring. I would like to at least change the face of the icon, the @ sign, to a picture of my choosing that would enable me to tell the difference of each one at a glance rather than having to slide my mouse pointer over each one to get the name of the web site to pop up.
Below is a picture of three of the icons on my dock. As you can see they all look the same, almost like the "Contacts" icon which is an @ sign on a book cover.
Best regards and still looking for clues and answers,
Peohguy

Your post helped me a lot. After all of the dust cleared and after sorting through all of the answers, the post(s) that solved my problem were from Kenichi Watanabe. However, I did have to go through all of Kenichi's posts to get the complete method that worked. Some of the other posts were difficult for me to comprehend and did not seem to work for me. I probably didn't do them like the writer's intended? Again thanks for taking the time to read my question and dig through your memory bank to come up with the thread that helped.
Best regards,
Peohguy

Is there a way to change the look of the new ical in Lion?

Is there a way to change the look of the ical in Lion?

David Armstrong (SE) wrote:
Ha ha ha yes!
The new OS will be called Macindows 01 beta of the beta v.1.000.001a
Arggggh I just had a nightmare whilst being awake!
Wow, one interface change in iCal and you Mac world falls apart? I have not even noticed the change to it over the other great features included in Lion. Not a hiccup, increased stability and speed on all my Macs, Loving Mission Control, iCloud is a great selling point and Mountain Lion, due out later in the year will yet again change the face of Computing forever. Windows is following along the same path, struggling to keep up (yes I run Windows as well - trecherous isn't it!), but yet we are all doomed because a handful of people don't like the leather bound look of Address Book which will probably change again in ML if a hack isn't written in the meantime. Petty arguement here. Just give feedback to Apple, I am sure it is on the top of their agenda.
Good Luck
Pete

How Can You Change the Look and Feel of Charts in OBIEE 11g

How Can You Change the Look and Feel of Charts in OBIEE 11g?
Edited by: user11973122 on Jul 18, 2012 12:13 AM

Check these files
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
Pls mark correct or helpful if helps

Custom Masterpage throws error in "Change the Look"

I created a custom master page based on the "Oslo" look in SP2013. The master page applies to sites just fine. However, when I try to use the "Change the Look" dialog in the site settings, the process hangs. I looked
at the script error console and found that it was looking for a missing div with the id "ms-designbuilder-cuicontainer." (The actual error
says "Unable to get property 'appendChild' of undefined or null reference in designgallery.js." I did a stack trace to find out what the null element was).
I don't see this div in any of the standard SharePoint master page html files, so I am wondering if there is a SharePoint snippet which generates
this div. I get the same error when I use the standard Oslo master page, but not with the Seattle master page. Any assistance you can provide would be greatly appreciated.

I decided to just make my custom master page work from the Seattle master page. The Oslo master page appears to be broken for other users as well.

Error when trying to change the look of a site collection

Hello everyone!
I have a single-server on-premise installation of SharePoint 2013 and I noticed that you can change the way fonts, colors etc. are used on a site collection by selecting "Change the look" from the site settings. However when I browse the page I
get an empty page with the spinner on the right just going in circles.
The browser log displays an error from _layouts/15/designgallery.js with this message:
SyntaxError: JSON.parse: unexpected character
The file is minified so unfortunately it does not tell me much more. However I also noticed a call to the webservice at /_layouts/15/designdata.ashx?hashcode=-1638098219&lcid=1033. Although this call returned a http 200 response the page turned out to
be the "Sorry, something went wrong"-page with a correlation id as well. Looking up the correlation id in the trace log I found this unexpected error
Application error when access /_layouts/15/designdata.ashx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Utilities.ThemeFontFace.Create(XPathNavigator xpnFontNode, XmlNamespaceManager nsm)
at Microsoft.SharePoint.Utilities.ThemeFont.Populate()
at Microsoft.SharePoint.Utilities.SPFont.Initialize(Stream stream)
at Microsoft.SharePoint.Utilities.SPFont.Open(SPFile file, Boolean readPublishedVersion)
at Microsoft.SharePoint.Utilities.SPFont.GetFontSchemesFromFolder(SPWeb themesWeb, String folderUrl)
at Microsoft.SharePoint.Utilities.SPFont.GetFontSchemesFromFolder(SPSite site, String strThemeFolder)
at Microsoft.SharePoint.ApplicationPages.DesignDataDownloadHandler.GenerateFontSchemeData()
at Microsoft.SharePoint.ApplicationPages.DesignDataDownloadHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Has anyone encountered this error before or knows what the issue might be? I suspect that this error prevents me from changing the look of the site collection.

Hi,
According to your post, my understanding is that the “Change the look” page displayed blank, and it still shown working on it.
This issue is always related to system requirenment. Did your environment fit for the hardware and software requirements for SharePoint ?
You can check with the following article:
http://technet.microsoft.com/en-us/library/cc262485.aspx
Did the issue occur in other site collection or web application?
You can refresh the page or reopen the page to check whether it loading.
Did you find any error or unexpected occurred in the ULS log or event log?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Custom Composed Look not appearing in Change the Look with custom color palette

Hi,
I created custom color palette, (which was a copy of one of the out of the box ones) and uploaded it to the Themes folder under a different name. I then went to the Composed Looks and created a new Composed Look(using the New
Items), which the seattle master page, and the new color palette that I created.
When I go to Change a Look, the new Composed Look does not appear as part of the options.
When I change the color palette of the Composed Look, to one of the out of the box ones, I see it I the Change a Look page.
What am I doing wrong?
Thanks

I would check two things. First, did you check in the spcolor file you created? Second, I would review all of the properties of your composed look found in "/_catalogs/design/AllItems.aspx". You might want to copy and paste all properties (except
title and name) and see if your new composed look shows up in "Change the look". Then link to your own custom spcolor file.
Eric Overfield - PixelMill -
blog.pixelmill.com/ericoverfield -
@EricOverfield

Mysites 'change the look' back to default

Hi -
I recently attempted to change the look of mysites in our environment. This worked, however it removed the person image from the upper left hand corner. I would like to 'undo' this change, but can't seem to figure out how. I would like
mysites to be back to the original masterpage before I changed it.
Thanks,
Jesse
Jesse A. Brandenburg

I will be safe and will select "Reset all pages in this site to site definition version"
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Change the look after creating own composed look.

I have recently been introduced to Sharepoint 2013, i have used the sharepoint palette download to change set colours in an .spcolor file. I have uploaded these and all worked fine however I now dont seem to be able to change the look it just hangs and when
clicking Try this out i get an error message.
I am using Oslo if that makes difference.
I even tried just altered the .spcolor file and replaced it in the Themes folder 15. When I go to change the look the current theme shows the updates in the small preview thumbnail however the page does not.
Does anyone know if this error is becasue ive uploaded my own .spcolor?

I shouldn' think so. I've not looked at the Palette creator tool for a few months but I'd assume that all it outputs is a file containing hex references matching your choices.
Does your deployment do this in site collection that doesn't have your custom palette?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Change the look of site element on sharepoint

I want to change the look of "more options" button, which looks ass thre bricks "..." as the picture below
link to the picture, More cleare
http://s29.postimg.org/f29je10h3/Namnl_sq.png
I have tried to find it in CSS and masterpage files but couldnt find it.
Where can i find it and change it to a word or an icon.
this is the url for the page http:///sites/SiteCollectionOne/Shared%20Documents/Forms/AllItems.asp

Hi Alba,
In SharePoint 2013, most part of the icon images are displayed from one image which is called spcommon.png and they are in different part of the image.
If you want to change the icon image, you can edit the site’s mater page and use code to change the icon image.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
$(".ms-ellipsis-icon").attr('src', 'http://sp/SiteAssets/2.PNG');//change the image URL to your own image which needs to be uploaded to SharePoint
</script>
<style>
.ms-ellipsis-icon{
!important;
.ms-ellipsis-icon-title{
!important;
</style>
Best regards.
Thanks
Victoria Xia
TechNet Community Support
do you know where in the code/ in the page i can find the import of the SPcommon.png file for these 3 bricks.
I masterpage i could find where to change icon for some features (fullscreen, the blue panner, Dropdown bread clum and so on) but i couldnt find the three ponits, if i can find the tag for this one then i can change the icon path to another one instead
of spcommon

Change the look and custom themes, masterpage problem

I have created a masterpage and deployed it to the masterpage gallery.
I have created a spcolor file and a spfont file and deployed them to the theme catalog.
I have also created a New item in the composed look list like this:
Masterpage: /_catalogs/masterpage/mycustom.seattle.master
Theme: /_catalogs/theme/15/mycustom.spcolor
Font: /_catalogs/theme/15/mycustom.spfont
Image: none
DisplayIndex 3
The problem is this: The theme is not displayed in the Change the look preview window.
But if i change the masterpage back to std (/_catalogs/masterpage/seattle.master) in my composed look item. THEN it is displayed ??
Changing back to my custom masterpage, then it disappears.
Everything looks right, i can apply the theme through code. Masterpage is also changed in code and works.
The only place it doesn't work is in change the look.
The masterpage is deployed like this:
<Module Name="MasterPages" List="116" Url="_catalogs/masterpage" Path="MasterPages" RootWebOnly="TRUE">
    <File Url="mycustom.seattle.master" Type="GhostableInLibrary">
      <Property Name="UIVersion" Value="15" />
      <Property Name="ContentTypeId" Value="0x010105" />
    </File>
</Module>
What am i missing ??

Hi blarsern,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
I will mark your reply as anwser to close this case.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Change the look error in sharepoint 2013

hi
i want to change the Them of my site.
go to Site Setting > Change the look and choice the them and click on
Try it out link
t
but i get this error:
what am i do?

Can you please paste your log information over here?
Sekar - Our life is short, so help others in their growth Whenever you see a reply and if you think is helpful, click
Vote As Helpful And whenever you see a reply being an answer to the question of the thread, click
Mark As Answer

Can we change the look and feel of the screen layout

Dear All,
I am new to ABAP WebDynpro, and would like to know the following with respect to ABAP WebDynpro :
1. To what extent can we change the look and feel of the screen layout ?
2. Is it possible to change the background color of the layout?
3. Is it possible to change the color of, Buttons etc ?
Any information / document/ link to explain this would be very helpful ..
Thanks in advance,
Aditi

Hi,
Psl check out these links.
check out these webdynpro standard components in SE80 tcode -
WDR_TEST_UI_ELEMENTS
check out this link on webdynpro for ABAP-
http://help.sap.com/saphelp_nw70/helpdata/EN/03/0048413e466e24e10000000a155106/frameset.htm-WD for ABAP
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm -UI elements
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm-Button Properties
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm- For different Layouts
Regards
Lekha

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Edit templates and change the look and feel of apex UI

Hi Friends,
I am trying to change the look and feel of apex pages(change the alignment,color etc) and try to edit the template
of apex pages. Please give me links or tutorials that helps to accomplish this,
Thanks,
Tj

Hello Tj,
You can spend some time on how to create your own Template, but it comes down to design your site in html and then break it into pieces and change the Templates in APEX with that html.
In that html you use tags e.g. #BOX_BODY# to tell APEX where the forms and reports need to come.
In the doc there are some explanations too: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#BABBFHJA
I think the best method is to just try it. Sure we give a course on that too, so it's up to you if you need training on that or the doc/your tries are sufficient or not.
Once you know how things work you can do pretty much everything.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

Change the look of a disabled component

Similar Messages

Maybe you are looking for